Lg.Nr. 26071 技術データ: - 積載能力 650 kg - フェイスプレート寸法:700 x 700 mm - フェイスプレート モット。無限に傾ける 0 - 135 ° - MOT回転数無限調整 0.07 - 1.5 rpm - 水平位置のテーブル高さ890mm - E. コントロールボタン - スペース要求量 約幅850×幅890×幅1200mm - 重量は約400 kg
450 € ウォッチリストに追加
Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49884-60
Lg.Nr. 25075 モット。溶接ロータリーおよび傾斜テーブル 仕様： - 耐荷重 1000 kg - フェースプレート 直径 800 mm - フェイスプレートはモーターで傾けることができま - 回転運動電動機。無段階可変 0 - 250 cm/min - 溶接電流伝達 650 A - 駆動 400 V / 2.8 kW - 水平位置でのテーブル高さ約 1100ミリメートル - 再-+反時計回りの回転 - 必要なスペース 幅1200×高さ1100×奥行1500mm ●重量約 850キロ
Key data: 1180 mm, 990 mm, 765 mm
重い溶接およびクランプテーブル 1,180×990ミリメートル 高さ765ミリメートル クランプ溝幅34 mm 材料の厚さ40 mm 重量 約1,020kg
機械タイプ:溶接回転テーブル 車名: マークル/コンツェルマン タイプ CD 50/25 - 320 接続電圧 1 x 230 V 速度範囲0.25〜2.5 rpm、無限に可変 速度制御1:10 トルク 2.5 – 10 Nm フェースプレート直径 250 mm フェースプレート-内部通路10 mm フェースプレート135の傾斜角度 垂直負荷容量 0.5 kN = 50 kg テーブルの高さ 320 mm 傾斜動作手動、クランプ可能 転倒トルク 90 Nm パンタグラフ 400 A 80 % 直流 接続用-フットスイッチが簡単 - ダブルフットスイッチ - フットリモコン 年齢 3 年 条件: 新品同様 重量44キロ 保証 納品日から24ヶ月 元の価格 €2,198.00 + 付加価値税 オファー価格 €1,690.00 + 付加価値税 フットスイッチは3mtrケーブルでシンプル 2 ...
溶接用ヒューム抽出台 溶接用テーブル DCE UMA150HG5 除塵 フィルター付き一体型吸引付き溶接テーブル メーカーのダストコントロール機器集塵機 タイプ UMA 150H G5 写真に従って休む
仕様： -負荷容量位置決めテーブル約。 750キロ -フェイスディスク直径500ミリメートル -ワークピースの直径1600ミリメートル -水平位置約の高さターンテーブル。 750ミリメートル - 右のターンテーブル、 - +左回転 -回転軸ターンテーブルエンドレス360 ●1回転あたりの回転時間12.5秒 - 左+右に回転 ●旋回軸回転角度180 ●旋回時間は180回転角10秒。 -ターンテーブル+スイベルアーム用の2×ダブルフッ ボタン - ハイド。ターンテーブルの中央にあるワークピース クランプするためのクランプボルト -クランプボルトのクランプストローク/クランプ移 32 mm -クランプ力プレス/引っ張り80 / 48.9 kN -クランプシリンダー雌ねじM 27 x 40 -ポジショニン ...
450 € ウォッチリストに追加
Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49884-30
1.100 € ウォッチリストに追加
Included support arms and clamping tools. Product on table not included Auction-ID: A1-48649-4
410 € ウォッチリストに追加
Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm. Auction-ID: A1-48474-209
570 € ウォッチリストに追加
Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-106
75 € ウォッチリストに追加
Table surface: 1100 x 550 mm, with vice (jaw width: approx. 135 mm), without accessories below Auction-ID: A7-49773-161
471 € ウォッチリストに追加
Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-100
510 € ウォッチリストに追加
Equipped with grid holes in top and side beams, Ø 15 mm, top thickness approximately 12 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-258
510 € ウォッチリストに追加
Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-99
100 € ウォッチリストに追加
Sale from caldelabra/lamp post factory liquidation. Welding table 202x300 cm Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-14
100 € ウォッチリストに追加
Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm (general height 88 cm, max. height 105 cm) Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-12
100 € ウォッチリストに追加
Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm. Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-13
10 € ウォッチリストに追加
top thickness approximately 50 mm. Including accessories, and accessories. Auction-ID: A1-48474-210
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 300 mmbore: 28 mmweight: 1670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...
table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...
table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...
table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
