Fabricant:
(Catégorie: 104)
Une rectifieuse de surface à table rotative CNC Reform est disponible. Tête de segment : 560 mm, dimensions des segments X/Y/Z : 94 mm/38 mm/180 mm, nombre de segments : 10, vitesse de la tête de segment : 720 tr/min, déplacement rapide : 2 m/min. Diamètre de la table rotative : 900 mm, vitesse de la table rotative : 40 tr/min, hauteur de travail du nouveau segment : 400 mm, commande : Siemens 805, heures de fonctionnement : 55800h. Documentation disponible. Une inspection sur place est possible.
Diamètre de meulage : 6 mm-150 mm, course de meulage max. : 125 mm, diamètre d’oscillation au-dessus de la table/avec couvercle : 600 mm/260 mm, course X/Z : 500 mm/170 mm, déplacement rapide : 10 m/min, avance : 10 m/min, résolution X/Z : 0,0001 mm, vitesse de la broche de la pièce : 850 tr/min. Dimensions de la machine X/Y/Z : env. 2550mm/3100mm/1800mm, poids : env. 2600kg. Documentation disponible. Une inspection sur place est possible. La machine est située en Chine.
Rectifieuse à bande longue TYPE : LZG-M-1 Taille de la table 2500 x 1000 mm avec contrôle de la vitesse •Pour le meulage, le matage et le polissage de l’acier Vitesse de la bande : 5-30 m/s réglable électroniquement en continu par potentiomètre Réglage électromoteur de la hauteur de la table sans entretien ; Plage de réglage : 350 mm Zone de travail : 2300 x 1000 mm Dimensions de la courroie : 6800x150 mm Puissance du moteur de la bande abrasive : 5,5 kW Charge max. de la table : 200 kg Structure de table en acier avec lattes de bois ; Avec butée de pièce réglable Guide de table au moyen d’un arbre de guidage trempé et rectifié 35 mm et roulements à billes à 6 voies de chaque côté Dimensions du plateau de ponçage : 320x350 mm Panneau de commande central et clair Grande projection de colonne unilatérale : 1000x350 mm Avec éclairage de la pi ...
Meuleuse à double banc, Fabr. Cordes & Sluiter, Type DOT-300 -Puissance du moteur 0,85 kW -Vitesse 1400 tr/min -meules max Ø 300 x 40 mm -Tension de fonctionnement 380 volts
1 gebr. Rectifieuse d’acier, Fabr. Solide, type DSCD
gebr. Meuleuse à double banc Fabr. Griffon Diamètre 200 mm Tours 3 000 tr/min.
An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.
Rectifieuse à graveur Marque : Couvercle Modèle : S0 Construit en 1994
gebr. Ponceuse à bande, Fabr. Format, type BS 75 Construit en 1999 Largeur de meulage 75 mm avec différentes bandes abrasives
1 gebr. Rectifieuse cylindrique, Fabr. Cincinnati, Type R 75, Construit en 1971 Hauteur de la pointe 130 mm Longueur de meulage 760 mm Alésage de la broche 38 mm Diamètre de la meule 300 mm, largeur 40 mm Poids de la pièce 75 kg. Max. La broche de meulage peut être pivotée deux fois
Thiel Produro 115 Machine à classer - Course et vitesse réglables en continu - Course 40-120mm - Vitesse 60-300 min - Pivotement de la table à 15° - Poids env. 500kg
Key data: 600 mm, 350 mm
G+H (Geibel + Hotz), FS 635 SA Construit en 1997 Surface de broyage 600x350 Poids : env. 2 600 kg
A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.
G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height ...
G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...
Key data: 19 mm
N’hésitez pas à demander plus de détails !
workpiece diameter: 350 mmworkpiece weight: 99999999 kgworkpiece height: 240 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 2 tdimensions of the machine ca.: mSeltene Gelegenheit:Teilüberholte Hochpräzisions-RundtischflachschleifmaschineMit komplett neuem Schaltschrank und neuer Steuerung mitBEMA SchleifsoftwareRundtisch-Durchmesser 380mmMagnet-Durchmesser 350mmSchleifscheibenabmaße 300x25x76,2mmTischdrehzahl variabel max. 200U/minSchwenkwinkel des Tisches +-3 GradSchleifspindeldrehzahl 800-4200 U/minLeistung Schleifspindelantrieb 5KWVerfahrweg quer max. 225mmVerfahrweg vertikal max. 480mmAbstand zwischen Magnetspannfutterund Spindelmitte, max. 390mmAutomatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifsc ...
Processus : rectification plongée sans centre, diamètre max. de la pièce : 20 mm, longueur max. de la pièce : 80 mm, sans automatisation par bol vibrant. Une inspection sur place est possible.
grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmmax. workpiece weight between centres: 250 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine mit sehr wenigen Betriebsstunden nach Überholungbeim Karstens Fachbetrieb.Zustellsteuerung JetterDigitalanzeigeInnenschleifvorrichtungReitstock mit ZylindrizitätsfeinverstellungHydraulische ReitstockpinoleEtc...Luftkissenschnellverstellung SchleifspindelstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece diameter: 1000 mmmin. workpiece diameter-at internal hobbing: 100-500 mmworkpiece length - max.: 500 mmcontrol: Siemens Sinumerik 840 D swing dia.: 1250 mmWorkpiece spindle flange diameter: 520 mmwork piece spindle speed range: 0-440 U/minweight of the machine ca.: 25 tdimensions of the machine ca.: 5100 x 3034 x 4500 mmTable travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mmTable speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axisEquipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentationThe data fo ...
Débattement 420 mm YWeg 270 mm Dimensions de la table 254 x 482 mm Projection 254 / 318 mm Vitesses de rectification de la broche 12 - 60 000 tr/min Course de la broche 92 mm Vitesses de broche 90, 136, 184, 280 tr/min Vitesse de course, réglable de 2 à 120 courses à 51 mm Précision 1,25 μm à 30 mm Raccord d’air comprimé 7 bar Poids de la machine env. 1700 kg Dimensions env. 1,45 x 1,2 x 2,4 m
Longueur de meulage : 500 mmLargeur de meulage : 200 mmHauteur de la pièce : 300 mmPuissance totale requise : 3 kWPoids de la machine env. : 1,6 tDimensions de la machine env. : 2,621,7 mPackage 5 x JUNG HF 50 EXW près de FrancfortLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
diamètre intérieur : 150 mmprofondeur de meulage : 200 mmCourse de la table : 425 mmalésage : 80 mm vitesse de la broche :: 17000 U / minpièces vitesses de tournage : 125/176/246/350 U/minmax. Diamètre de l’oscillation : 250 / 420 mmPuissance totale requise : 2,2 / 0,5 / 0,9 kWPoids de la machine env. : 2 tdimensions de la machine env. : 2,40 x 1,20 x 1,45 mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt K 80- Hinged protec ...
width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 90.0 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- This automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for the longest service life and the best possible smoothness- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed structurally optimized- thus a burning of the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible suc ...
width of the strips: 150 mmband length: 2000 mmband speed: 1400 / 2800 U/mintube diameter: 40 - 140 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request- Machine video - identical machine -https://www.youtube.com/watch?v=LXP09NFTnlw&t=1sThe FALKEN PN 38/140 is a multifunctionalgrinding machine for grinding pipe and profile endsEquipment:- robust electro-motor pipe profile grinding machine- enables notches up to an angle of 50°- large-dimensioned surface grinding surface with protective cover- 2x belt speeds- control panel, front left - including emergency stop button- grinding belt can be replaced quickly and easily- vice movement to the right - left, forwards & backwards possible- side grinding dust collection container- horizontal & vertical grinding alig ...
tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mmThe TUGRA TT 90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- easy manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 90.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...
width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 72.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 75 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...
width of the strips: 150 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight of the machine ca.: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- ...
Innovac GmbH
