sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 706)
Overview This filling machine from the German manufacturer ALWID is equipped with 8 filling heads and is specifically designed for filling small-volume bottles (100 ml). Precise dosing is achieved using mass flow meters (Coriolis principle) from the reputable manufacturer Endress+Hauser, ensuring high accuracy and repeatability. Technical Specifications: Manufacturer: ALWID Number of filling heads: 8 capacity: 8.000 - 10.000 /h working direction: right-left Filling volume: Designed for 100 ml (other volumes may be adjustable) Dosing system: Mass flow meters by Endress+Hauser Typical application: Low- to medium-viscosity liquids Key Features: Hygienic design for easy cleaning (CIP) Suitable for pharmaceuticals, cosmetics, food, or chemicals High filling accuracy thanks to mass flow technology adjustable filling lance movement
Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data Application: Beer and other carbonated beverages Capacity: 6,000 bph Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring Bowl Diameter: 960 mm Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating Hours: ...
Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer fil ...
Overview The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time. Technical details Output 12,000 bottles/h with 0.7l glass bottle 10,000 bottles/h with 1.0l glass bottle 6,000 bottles/h with 1.5l PET bottle Formats 0.7l glass bottle 1.0l glass bottle 1.5l PET bottle Plastic closure Screw cap 28 mm Push-on cap Label Body, back, neck loop, neck ring Bottling product Raspberry and various fruit syrups Special hesperide vinegar Filling temperature: 25°C Running direction: L-R Siemens S5 Scope of delivery Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air Vacuum filler | Krones | Sensometic | Capper | Alcoa | PP 10 / 360 Capper | Alcoa | K 10 / 360 Cold glue labeler | Krones | Prontomatic ...
Overview This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...
Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line. Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET- ...
Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data Manufacturer: Krones AG Machine Type: Filling and capping monoblock Model / Identification: Krones Modulfill Year of Manufacture: 2012 Application: Filling and closing of glass bottles Adjusted to Bottle Sizes: 0.75 l ( ...
Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational
Overview This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be viewed in person at any time. Technical Details Capacity: 3,000 bottles / hour (according to manufacturer) Formats: Currently set up for 330 ml longneck bottle Counter-pressure filler with double pre-evacuation Total operating hours: less than 1,000 hours Running direction: right - left Filling valves mechanical electropneumatic Mechanical height adjustment With color touch screen monitor Dismantling and transfer took place in December 2023/January 2024 Optional (not included in the price): Bottle conveyor belts incl. loading and unloading table
Overview The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time. Technical details Number of filling places: 48 Pitch circle diameter: 1560 mm Capacity (last): 250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized 160 - 200 bottles/ min at 250ml maple syrup Used plastic cap can be applied by installed AROL capper Dimensions Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg Electr. characteristics Voltage: 400 V - 50 Hz Auxiliary voltage: 24 V DC Installed power: 20 kW Scope of delivery Filler | ...
Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically trig ...
Overview This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Capacity: Not provided Formats: 0.75 L Gourmet bottle 0.25 L Gourmet bottle 0.25 L Vichy bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems: Base inspection (camera) Sealing surface inspection Thread inspection (conical opti ...
Aperçu L’inspection du niveau de remplissage a été réalisée en 2019 par le constructeur allemand Krones. La machine n’est pas installée pour le moment. Techn. détails : Capacité : 50 000 bph Inspection via émetteur gamma Krones Checkmat avec courroie de décharge
Aperçu Le contrôle de caisse a été construit en 2012 par le constructeur allemand Syscona. Le pourcentage de bouteilles étrangères à laquelle la caisse est rejetée peut être fixé. Détails techniques Capacité : 3 800 caisses/h Tirage longitudinal Formats utilisés précédemment : 12 bouteilles PET de 1L Inspection par caméra Incluant le distributeur pré-courroie et la ligne 230V/ 50Hz
Aperçu L’inspecteur Crate a été fabriqué en 2017 par le constructeur allemand Visiontec. Il est réglé pour des bouteilles en verre de 0,5 l et vingt caisses modul. L’inspecteur est équipé d’un système multi-caméras. Si une bouteille externe est détectée, la caisse sera poussée vers l’extérieur dans une autre ligne. Actuellement, la configuration est pour une longue caisse latérale à leeding.
Aperçu Cette machine d’inspection des niveaux de remplissage a été fabriquée en 2017 et la machine d’inspection des labels en 2015 par la société allemande Vision-Tec. La pousseuse était fabriquée par la société allemande BBULL. Il est conçu pour vérifier la hauteur de remplissage, la fermeture et l’étiquette des bouteilles pleines. La machine est en production jusqu’en octobre 2025. Capacité des données techniques : Portée de livraison ajustable Système d’inspection de niveau de remplissage | Vision Tec | Système d’inspection des étiquettes 2017 | Vision Tec | 2015 Système de rejet | BBULL
Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout d ...
Overview This Anker-Roland rotary labelling machine was manufactured in 1996 and is designed for the application of cold-glue labels on glass bottles. The machine is equipped with two labelling stations and four bottle plates, making it suitable for typical multi-label applications in beverage and spirits bottling lines. The configuration allows the application of neck and front labels and back labels. With a production capacity of approximately 3,000 bottles per hour at 0.7 L, the system is well suited for small to medium-sized production lines. The machine includes eight format equipment sets, covering bottle diameters from 60.5 mm to 86.5 mm, allowing flexible processing of several round bottle formats between 0.35 L and 1.0 L. Technical Data Manufacturer: Anker-Roland Machine type: Rotary cold-glue labelling machine Year of manufacture: 1996 Serial number: 1058/96/065L Labelling s ...
Overview This ENOS Base automatic self-adhesive labelling machine was manufactured in 2002 and is designed for the application of front and back labels on various bottle shapes. The machine uses pressure-sensitive (self-adhesive) labelling technology, which allows flexible processing without the need for mechanical format parts. The system can handle round, cylindrical, and square bottles within a volume range of 0.2 L to 1.0 L, making it suitable for a wide variety of beverage, spirits, or specialty product applications. With a production capacity of approximately 1,000 bottles per hour (0.7 L format), the machine is well suited for small to medium production environments. Technical Data Manufacturer: ENOS Model: Base Machine type: Automatic self-adhesive labelling machine Year of manufacture: 2002 Labelling technology: Pressure-sensitive (self-adhesive) Label positions: Front label Bac ...
Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data: manufacturer: ENOS, Italy model: Eticap year of manufacture: 2008 labelling Heads: 2 (wet-glue heads) Head 1: front and neck labels Head 2: back labels operation Direction: Left to right production Capacity: 4.000/h adjusted for: cylindrical glass bottles 0,7 L = Ø75mm 1,0 L = Ø86mm condition: Stored off-line since 2020, machine in a good condition actual label sizes: front label: 131mm height, 77mm width back ...
Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data Capacity: approx. 1,200 bottles/hour (standard labels) up to approx. 1,500 – 1,800 bottles/hour (small labels) approx. 1,100 bottles/hour (front and back from one roll) Formats: Diameter 50 – 100 mm, conical bottle shapes Application: Bottle labelling (beverage, wine, spirits) Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll Label positions ...
Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt heigh ...
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data: manufacturer: Krones, Germany model: Contiroll HS 810-720 year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine, production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data: manufacturer: Krones, Germany model: Contiroll HS 810-720 year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine, production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC
Aperçu La machine a été construite en 2004 par le fabricant allemand Langguth et est entièrement révisée. Les images ne correspondent pas à la machine réelle, mais sont bien comparables et représentatives. Données techniques : Hauteur de collage jusqu’à 210 mm Complètement révisée comme montré sur les photos, mais avec un cadre de base en acier. Incluant 2 formats de bouteilles + 2 formats d’étiquette Optionnel avec platine à décollage
Overview This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. ...
Overview The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty. Technical data Capacity 12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm 14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles Easy format changeover due to quick-change system without tools Siemens S7 control system Bottle loading system with hopper 1000 l, in stainless stee ...
Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data year of manufacture: 2009 capacity 60/min adjusted formats: 1,5L PET (2x(3x2)) operation: film only application: water, beer, CSD condition: very good, still connected Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available
Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data year of manufacture: 2011 capacity 60/min adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET operation: film only application: water, beer, CSD condition: very good, still connected Additional information conveyor for packages available
Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data Manufacturer: Kettner GmbH / Krones Group Machine Type: Bottle packer / crate packer Model: Blitzpac Junior E 3T Year of Manufacture: 2003 Application: Packing of ...
