Fabricante:
(Categoría: 107)
barra redonda de acero: 28 mmacero de borde cuadrado: 25 mmViga L: 80 x 8 mmtapa de muesca. acero dulce máx.: 7 mmcapacidad de corte de la cizalla vertical: 350 kNPompotencia de la cizalla: 190 kCizalla: material plano: 100 x 11 mmcizalla: longitud de las cuchillas: aprox. 175 mmpotencia total requerida: 1,5 kWpeso de la máquina aprox.: 0,5 tdimensiones de la máquina L x W x H: 1,0 x 0,5 x 1,5 mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
tube diameter: 28 mmwall strength: 2 mmbending radius min.: 90 °Control: 3D TubeSoft Slim total power requirement: 3,5 kWweight of the machine ca.: - kgdimensions of the machine ca.: - mmDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Espesor de la placa: 1,2 mmDiámetro del rollo: 62 mmGarganta: 100 mmPeso de la máquina aprox.: 50 kgDimensiones de la máquina aprox.: 560 x 220 x 500 mm
sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad ...
espesor de la placa: 0,8 mmgarganta: 180 mmdiámetro del rollo: mmpeso de la máquina aprox.: 22 Kgdimensiones de la máquina aprox.: 500 x 450 x 160 mmLa máquina de rebordeado está equipada con:- Interruptor de emergencia- Interruptor de pie- 7 piezas. Juegos de rollos
espesor de la placa: 4 mmdiámetro del rollo: 125 mmgarganta: 200 mmpotencia total requerida: 2,2 kWpeso de la máquina aprox.: 0,48 tdimensiones de la máquina aprox.: 1,6 x 0,6 x 1,2 mm• 5 velocidades• Con pedal• Con motor de freno• Con parada de emergencia• Con ajuste hidráulico de rodillos• Con 4 juegos de rodillos
sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: Handbetrieben weight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1000 kgworkpiece diameter: 20-800 mmconnected load frequency: 230 Vspeed: 100 - 1000 mm/mintotal power requirement: 0,1 kWweight of the machine ca.: 65 kgdimensions of the machine ca.: 520x470x390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tworkpiece diameter: 250 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 420 Kgdimensions of the machine ca.: 1600 x 800 x 1200 mmMotorized sheet metal bending machine with:- Foot switch for left / right- manually adjustable rear roller- Hardened rollers- Conical bending- Swiveling top roller- Safety device emergency leash- Documentation currently only in English- 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diámetro del tubo: 12-54 mm (Kupfer / Edels. mmnúmero de serie: EBD 022 99 002 modo de funcionamiento: Schneiden/ Entgraden / Re velocidad: Rollen 450 U/min m/min
weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ancho de la hoja: 1020 mmespesor de la placa: 2,5 mmdistancia entre columnas: 1050 mmapertura de la luz diurna: mm: 135 potencia total requerida: Handbetrieben kWpeso de la máquina aprox.: 0,32 tdimensiones de la máquina aprox.: 1,4 x 0,6 x 1,3 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.
: 30 mm: 30 mmL-beam: 20 x 20 x 4 mmflat steel: 25 x 6 mmAxis diameter: 20 mmwork speed: 11 U/mintotal power requirement: 0,2 kWweight of the machine ca.: 80 Kgdimensions of the machine ca.: 0,6 x 0,6 x 1,5 mProfile bending machine with:- Foot pedal for right/left rotation- Digital display- 1 set of standard rollers- 3 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 610 mmplate thickness: 1,0 mmdistance between columns: 620 mmdiameter of upper rolls: 38 mmtotal power requirement: Handbetrieben weight of the machine ca.: 40 Kgdimensions of the machine ca.: 950 x 270 x 360 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1550 mmplate thickness: 3 mmdistance between columns: 1600 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 2,06 x 2,14 x 1,21 mDemonstration machine with small paint damage.The machine works quietly and is powered by its geared motorBraking system energy-saving.Our machine is welded as a monobloc body from ST42 quality material.The knives of the machine are of 2379 quality and the brand name is BOHLER.These high-quality knives guarantee precise cutting.Emergency stop button, foot switch and finger guard are includedstandard equipment.(Documentation in English only)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ancho de la hoja: 915 mmespesor de la placa: 1,0 mmdistancia entre columnas: 920 mmapertura de la luz natural: mm: 135 requisito de energía total: Handbetrieben peso de la máquina aprox.: 96 Kgdimensiones de la máquina aprox.: 1170 x 400 x 480 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.
: máx. 16 mmborde cuadrado de acero: 16 mmbarra redonda de acero: 16 mmpeso: 45 Kg: 180 dimensiones: 0,4 x 0,4 x 1,1 m
weight max.: 100 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 80 tworkpiece diameter: 850 - 5500 mmdrum diameter: 450 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 60 tworkpiece diameter: 750 - 5000 mmdrum diameter: 450 x 180 mmfeed: 100 - 1000 mm/mintotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3 ...
Key data: 2000 mm, 3 mm
Ajuste de la longitud de corte, pedal, sin tope La máquina es reparada, revisada, limpiada por un profesional y luego es completamente funcional. Se realiza una prueba de funcionamiento (o en el estado actual por 3.500 €) Ancho de la hoja: 2000 mm Espesor de la chapa de acero: 3,0 mm Color: blanco Peso de la máquina: 2500 kg Dimensiones: 2800 x 1800 x 1500 mm con ajuste de la distancia de corte Tensión conectada: 16 A Sujeción: hidráulica Proyección de columna: 250 mm Proyección: 60 mm Ángulo de corte fijo Número de máquina: 2892
Capacidad máx. de punzonado y cizallamiento: 400 kN Por ejemplo, perfora agujeros de 20 mm en acero de 15 mm Cizallas en la cizalla plana de acero en acero de 120 mm a 12 mm Más datos técnicos a petición Con un surtido de sellos y troqueles según se desee
Ancho de la hoja: 700 mmEspesor de la placa: 4,0 mmDistancia entre columnas: 720 mmDiámetro de los rodillos superiores: 95 mmPotencia total requerida: 1,1 KWpeso de la máquina aprox.: 0,37 tdimensiones de la máquina aprox.: 0,95 x 0,76 x 1,25 mm
ancho de la hoja: 1000 mmespesor de la placa: 3,3 mmdistancia entre columnas: 1050 mmdiámetro de los rodillos superiores: 90 mmrequisito de potencia total: 1,1 KWpeso de la máquina aprox.: 0,39 tdimensiones de la máquina aprox.: 1,4 x 0,9 x 1,2 mmDobladora de chapa con dimensiones especiales:- Capacidad 700 x 4 mm- Doblado cónico- Rodillo superior abatible- Dispositivo de seguridad de liberación de emergencia- Documentación- 400V
sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
