Fabricante:
(Categoría: 101)
x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mmthroat: 300 mmbore stroke: 150 mmdistance spindle /table: 60-765 mmdistance spindle/base plate: 1.200 mmtaper MK: 3 threading: M20/M24 column diameter: 115 mmtable-size: 510 X 425 mmspindle turning speed - stepless: 60 - 1:400 U/mintotal power requirement: 1,4 kWweight of the machine ca.: 350 Kg.dimensions of the machine ca.: 1,9 x 0,6 x 0,9 m- Digital spindle speed display- Foot switch- Thread cutting device- Left-right rotation- 2-speed motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacidad de diámetro en acero / mmgarganta: / carrera de mmboro: / mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
Capacidad de diámetro en acero (diámetro): 28 mm longitud de brazo: 700 mm altura máxima de la pieza: 1300 mm de conicidad de herramienta: MK3 avances: 0,1-0,3 mm/Rango de velocidad de giro en el husillo en U: 100-1,220 U/mínimo consumo total de potencia: 1,4 kWweight de la máquina aprox. 1,3 tDimensiones de la máquina aprox. 1,8 x 0,8 x 2,3 mIncl. Tabla de cubos Incluye alimentación de perforaciónClampeado mecánicoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
Taper MK: 3 alimentación: 4 Stufen : 2580 X-recorrido: 2500 mm Garganta: 1000 mm: 1000/2800 mm Peso: 3,7 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
X-recorrido: 880 mmy-Recorrido: 630 mmz-recorrido: 630 mm, potencia total requerida: kWweight de la máquina, aprox. 8800 kg. Dimensiones de la máquina, ca.: m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 1.600 mmworkpiece height max.: 1.200 mmdistance spindle/base plate: 320 - 1.220 mmspindle taper MT: 5 quill stroke: 315 mmthroat min.: 350 mmthroat max.: 1.600 mmquill feed: 0,04 - 3,20 mm/Udrive capacity - spindle motor: 4,0 kWspindle turning speed range: 25 - 2.000 U/mincolumn diameter: 350 mmvoltage: 400 Vtotal power requirement: 6,5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,45 x 1,00 x 2,65 m- Serial-No.: 4045935- Clamping cube 630 x 500 x 500 mm- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1050 mmy-travel: 570 mmz-travel: 510 mmControl: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1power capacity - main spindel: 16,5 / 11 kWmax. Torque: 141 Nmtool taper: BT 40 distance spindle /table: 150 - 775 mmwork table:: table surface area: 1300 x 570 mmmax. table load: 1000 kgtool magazin:: number of toolpositions: 40 pos.tool taper: BT 40 max. tool diameter: 80 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,2 secchange-time chip to chip: 3,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/minworkpiece height max.: 590 mmtotal power requirement: 40,9 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,5 x 3,1 x 2,98 m3-axis vertical CNC machining center- Siemens 828D CNC control and workshop-oriented programming supportShop Mill- 40-tool tool changer (BT 40)- Basic cooling system / spin ...
x recorrido: 200 mmy - recorrido: 200 mmz - recorrido: 280 mm Control: HEIDENHAIN iTNC 530 tabla - giratorio +/-: -10 / +130 -Mesa giratoria en el eje C: 360 cabeza de fresado: 42.000 rpm cargador de pieza de herramienta con: 60 Werkzeugplätzen peso de la máquina aprox: 5 tdimensiones de la máquina aprox: 2 x 2 x 2,4 m Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.
Control: Fabricación: HEIDENHAIN iTNC 530 x-recorrido: 860 mmy-recorrido: 560 mmz -recorrido: 600 mm-tamaño de la mesa: 1000x560 mm, rango de velocidad de giro del husillo: 10000 U/mintool magazin:: 24 peso de la máquina aprox.: 6,5 tHEIDENHAIN TNC-426Preparado para el 4º eje www.marcels-maschinen.ch Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
surface area: 1168 x 508 mmmax. table load: 1800 kgtravel -x axis: 1016 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle taper: SK40 spindle speed: 10000 U/minspindle capacity: 15 kWspindle torque max.: 99 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 20 kWweight of the machine ca.: 4,15 tdimensions of the machine ca.: 3,7 x 3,3 x 2,5 mThe machine is like new !, only 61 spindle hoursTool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
surface area: 1321 x 610 mmmax. table load: 1800 kgtravel -x axis: 1270 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle cone: SK40 number of spindle speeds: 12000 U/minspindle capacity: 15 kWspindle torque max.: 82 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 21 kWweight of the machine ca.: 4,25 tdimensions of the machine ca.: 4,1 x 3,35 x 2,6 mthe machine is like new!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 1000 x 600 mmspindle taper: HSK 63 A spindle turning speed - stepless: 18.000 U/minfeeds x/y/z -stepless: 0 - 30.000 mm/minrapid traverse: 30 m/minno. of tools in magazin: 2 x 12 workpiece diameter at full load: 130 mmtool length - max.: 315 mmweight of tools max.: 8 kginternal coolant system feed: 40 barcontrol: HEIDENHAIN control: MillPlus iT table load capacity: max. 500 kgtotal power requirement: 52 kVAweight of the machine ca.: 6,5 tdimensions of machine L x W x H: 3,40 x 1,86 x 2,42 mAccessories: probe HEIDENHAIN, TS 640, electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4000 mmy-travel: 2500 mmz-travel: 1500 mmbore diameter: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe UNION KC 110 CNC boring mill in rigid T-type cross-bed design offers outstanding precision, power and reliability for efficient complete machining of prismatic workpieces. Equipped with a HEIDENHAIN iTNC 530 control, a 110 mm spindle and continuously variable spindle speeds up to 3,000 rpm, the machine is designed for demanding heavy-duty machining applications. With travels of X 2,500 mm, Y 2,000 mm and Z 1,500 mm, the UNION KC 110 is perfectly suited for large-scale machining tasks in modern production environments. Additional highlights include a 60-position automatic tool changer, high-pressure coolant system and an extensive refurbishment package ensuring long-term performance and accuracy.The data for this ad was created ...
X-recorrido: 800 mmy-recorrido: 600 mmz-recorrido: 500 mm-control: Heidenhain iTNC 530 requerimiento total de potencia: kWpeso de la máquina aprox.: 8300 kgdimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
x-travel: 1250 mmy-travel: 850 mmz-travel: 800 mmControl: Heidenhain MillPlus total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: SIN 840 D SiemensB - axis: +/- 110 x 0,001 °C-axis: 360 x 0,001 °feed X/Y/Z-axis: 1 - 20.000 mm/minrapid traverse X/Y/Z: 40,00 m/minspindle turning speed - stepless: 20 - 8.000 U/mintool taper: SK40 power capacity at 100 % load: 13,50 kWpower capacity at 25 % load: 23,50 kWmax. torque at 10% load: 85,00 Nmmax. torque at 25% load: 150,00 Nmtable surface area: 2.920 x 740 mmnumber of T-slots: 7 T-slot - distance: 100 mmT-slots: 1x 18H7 / 6x 18H12 integrated rotary-table: 750 mmtable load of rotary table max.: 500 kgtool magazin:: 60 tool diameter: 80,00 mmwotkpiece diameter with 2 vacant positions: 130 mmtool length - max.: 300 mmweight of tools max.: 6,00 kgtotal power requirement: 57 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: 10,50 x 6,60 x H2,70 m5-axis simultaneous machining center with SIEMENS SINUMERI ...
x-travel: 650 mmy-travel: 520 mmz-travel: 475 mmcontrol: Heidenhain TNC 530 tool adaptor: turning speeds: 15000 U/minspindle motor: 25/35 kWtool change unit: 30 pos.table surface area: 630 X 500 mmworkpiece weight: 300 kgc-axis: 360 (0,001) °A-Axis: -35 / +110 °rapid traverse: 42 m/minfeed: 10 m/mintotal power requirement: 31 kVAdimensions of the machine ca.: 3,3 x 2,2 x 2,78 mtotal wight: 7,5 t5-Axis Machine ausgestattet mit:- CNC Control Hiedenhain TNC 530 / DMG ERGOLine- elektr. Handwheel- NC-Rotary / swivelling Table- Coolat- Vollkabine- ATC 30-fold- Renishaw Measuring - Chip Conveyor- 3D-Quick-SetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2100 mmy-travel: 2100 mmz-travel: 1250 mmspindle motor: 20 kWspindle turning speed range: 24000 U/mintool taper: HSK A 63 b-axis: -70 / +180 °table diameter: 1700 mmtable load: 8 tFeed speed: 60 / 40/ 40 m/min.rapid traverse: 60 / 40 / 40 m/minControl: Heidenhain iTNC 530 total power requirement: 89 kVAweight of the machine ca.: 41 tdimensions of the machine ca.: 9,8 x 7,5 x m- CNC Control Heidenhain iTNC 530- Tool Changer 93-fold (HSK A 63)- Motor Spindle / Pick-Up Spindleapprox 40900h Working Hours and 27100 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-viaje: mmy-viaje: mmz-viaje: mmm-recorrido: mmConsumo total de energía: kWweight de la máquina ca.: trequired space: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 280 mmbore stroke: 150 mmspindle taper MT: MK 4 thread cutting attachment: M 30 table-size: 550 x 400 mmspindle turning speed - stepless: 80 - 1.400 U/minfeed range - boring: 0,1 / 0,2 / 0,3 mm/Ucoolant: voltage: 400 Vtotal power requirement: 1,3 / 2,3 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 0,70 x 0,80 x 1,95 m- Serial No.: 186367- Excellent condition!- Automatic vertical feed- Threading unit Max. threading capacity: M30- Reversible motor Speed 1: 80 – 700 rpm Speed 2: 160 – 1.400 rpm- Quick-action drill chuck ALBRECHT 1–13 mm- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2100 mmy-travel: 1500 mmz-travel: 1500 mmNumber of pallets: 2 size of pallet: 1250 x 1250 mmdimension of workpiece: 2000 x 1725 (H) mmfeeds: 0,1 - 12000 mm/minrapid traverse: 24000 mm/minspindle motor: 26/22 kWspindle turning speed range: 10 - 6000 U/minTool magazine positions: 60 fachtool taper: BT 50 control: Fanuc 31i-MB workpiece weight: 3000 kgtotal power requirement: 69 KVAtotal wight: 29 tdimensions of the machine ca.: 10,5 x 5,8 x 4,1 m- CNC control FANUC 31i-MB 4-Axis (X,Y,Z,B)- 2 pallets 1250mm- chip conveyor- High pressure through spindle coolant (Hydtec)- ATC 60 toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 885 mmy-travel: 600 mmz-travel: 600 mmc-axis: 360 °b-axis: +10 / -110 °control: Heidenhain iTNC 530 : : 42000 min/-1: 20 / 15 kWtable surface area: dia 750 mmmax. table load: 800 kg: : 30 pos.tool taper: HSK E 50 feeds:: feed speeds: max. 90.000 mm/minrapid traverse: 90 m/mintotal power requirement: 73 kVAweight of the machine ca.: 11 tdimensions of the machine ca.: 3,3 x 2,9 x 3,1 mHigh dynamic 5-Axis-Precision Centerequipped with:- CNC ControlHeidenhein iTNC 530- ATC 30-fold (HSK E50)- Chip Conveyorapprox 57000H working hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 650 mmz-travel: 550 mmControl: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mmMain spindle:: turning speed range - main spindle: 10 - 20000 min/-1power capacity - main spindel: 22 / 11 kWmax. Torque: Nmtool taper: BT 40 work table:: table surface area: 1200 x 650 mmmax. table load: 800 kgTool-Presetter:: number of toolpositions: 30 pos.tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1500 mm/mintotal power requirement: 48,55 kVAweight of the machine ca.: 10 tdimensions of the machine ca.: 3,65 x 3,30 mCNC Machining Center Vertical- CNC control Fanuc 31i-MB- ATC 30-fold (BT 40)- Chip Conveyor- Tool Measure- Mold Option- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.600 mmy-travel: 920 mmz-travel: 820 mmcontrol: iTNC530 HeidenhainB - axis: +/- 90 x 1 °C-axis: 360 x 0,001 °feed X/Y/Z-axis: 1 - 20.000 mm/minrapid traverse X-axis: 100 m/minrapid traverse Y-axis: 60 m/minrapid traverse Z-axis: 60 m/minspindle turning speed - stepless: 20 - 10.000 U/mintool taper: SK50 power capacity at 100 % load: 32,00 kWpower capacity at 40 % load: 48,00 KWmax. torque at 40% / 100% load: 294 / 196 kWtable surface area: 4.200 x 900 mmnumber of T-slots: 9 T-slot - distance: 100 mmT-slots: 1x 18H7 / 8x 18H12 table load capacity - central/maximum: 4.200 kgtool magazin:: 80 tool diameter: 115 mmwotkpiece diameter with 2 vacant positions: 160 mmtool length - max.: 360 mmweight of tools max.: 12,00 kgtotal power requirement: 85,00 kWweight of the machine ca.: 32,00 tdimensions of the machine ca.: 11,50 x 6,60 x H3,30 mVertical machining center with HEIDENHAIN i ...
x-viaje: mmy-viaje: mmz-viaje: mmm-recorrido: mmConsumo total de energía: kWweight de la máquina ca.: trequired space: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
spindle diameter: 135 mmx-travel: 950 mmdistance between columns: 1100 mmy-travel: 700 mmcross rail adjustment - vertical: 780 mmquill travel: 300 mmmax. distance between table and spindle-nose: 1000 mmtable surface area: 1100x842 mmtable load: 1500 kgspeeds: 40-2000 U/minadjustment speed: 5-1500 mm/minelectrics - voltage/frequency: 380/50 V/Hztotal power requirement: 8 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 3,3x2,34x2,8 mtotal power requirement: 8 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 3,3x2,34x2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mmthroat: 275 mmbore stroke: 100 mmtaper MK: 4 MKtable-size: 420 x 340 mmfeeds: nein mm/Uturning speeds: 80 - 2000 U/mintotal power requirement: 0,9 / 1,45 KWweight of the machine ca.: 0,22 tdimensions: 0,85 x 0.6 x 1,9 mPillar drill with:- Variable spindle speed- Digital speed display- Digital depth display- Forward/reverse rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cilindrada del diámetro en acero: 32 mm garganta: 300 mm carrera de diámetro: 140 mm, cono MK: 3 MKtamaño de la mesa: 380 x 360 mm de avances: über Velocidades de giro manual: 85 - 1100 U/min Potencia total: 1,3 KWpeso de la máquina aprox.: 0,27 tDimensiones: 0,95 x 0,6 x 1,92 mTaladro de pilar con:- Alimentación por volante - Velocidades del husillo por transmisión por correaLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
