Fabricante:
(Categoría: 107)
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool-Tool: for press brake, 6 pieces-Tool: for closing folds-Drawing: in the photos-Dimension: 20 x 70 x 495 mm-Price / fee: complete-Length total: 2970 mm-Total weight: 31.3 kg
Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail-Stop: shaft Ø 18 mm-Takes: square 16 x 16 mm/M10 x 1.5-Dimensions: Ø 18 x 2365 mm-Weight: 4,5 kg
Hand lever shears, long knife sheet metal and round steel shears, lever shears-Manufacturer: Mubea, tin and round steel shears-Blade insert length: 200 mm-Round steel: up to approx. 20 mm-Rectangular profile: up to approx. 19x19 mm-Lever arm: with rack and pinion translation-Total dimensions: 455/170/H1540 mm-Transport dimension: 1230/170/H440 mm-Weight: 49 kg
Bending tool, die, upper knife, upper tool, straight tool-Tool: for press brake, 14 pieces-Tool angle: 25°-Drawing: in the photos-Dimension: 25 x 158 mm-Length total: 2615 mm (lengths see parts list photo)-Weight: 47.3 kg
Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail-Stop: shaft Ø 20 mm-Takes: square 16 x 16 mm/M10 x 1.5-Dimensions: Ø 20 x 2400 mm-Weight: 5.6 kg
Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail-Stop: shaft Ø 32 mm-Length unit: 1263 mm-Dimensions: Ø 32 x 1830 mm-Weight: 11 kg
Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail-Stop: shaft Ø 32 mm-Length unit: 1613 mm-Dimensions: Ø 32 x 1845 mm-Weight: 11.3 kg
Replacement knife for table shears, replacement blades, cutting knives, shear knives-Number: 2x knives available-Angle honed: 90°-Dimensions: 20 x 80 mm-Lengths: 2x 2397 mm-Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm-Threaded hole-Price: complete-Weight: 56 kg
Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp-Beam clamp: lifting claw type SCH.KL 1160-Clamping area: see photos-Load capacity: kg-Dimensions: 160/140 / H410 mm-Weight: 13 kg
Bending tool, die, upper knife, upper tool, upper beam-Tool: for folding machine-Dimensions: 60 x 15 mm-Length: 1020 mm-Weight: 6 kg
Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp-Manufacturer: Renfroe, sheet metal gripper lifting clamp type MPC2-Clamping range: 30-60 mm-Load capacity: 2000 kg-Dimensions: 400/300/120 mm-Weight: 9.3 kg
Bending tool, die, upper knife, upper tool, deer foot tool-Tool: for press brake-Tool radius: mm-Dimensions: 30 x 169 mm-Length: 2500 mm-Weight: 89 kg
Bending tool, die, lower knife, lower tool, lower beam,-Tool: for folding machine-Widening: for lower cheek-Dimensions: 33/76/3040 mm-Bore distance: 280 mm-Hole diameter: 18 mm-Length: 3040 mm-Weight: 33 kg
Bending tool, die, upper knife, upper tool, straight tool-Tool: for press brake-Tool radius: mm-Dimensions: 14 x 94 mm-Length: 2500 mm-Weight: 20 kg
Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine-Rolls: 20-Distance rings: 14-Executions: different-Take: Ø 28 mm-Price: complete-Weight: 21.4 kg
Bending tool, die, upper knife, upper tool, straight tool -Handover in the current condition as seen -partially damaged -Tool: for press brake -Dimensions: 35 x 154 mm -Length: 2653mm -Weight: 79.5kg
: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ancho de la hoja: 1020 mmespesor de la placa: 2,5 mmdistancia entre columnas: 1050 mmapertura de la luz diurna: mm: 135 potencia total requerida: Handbetrieben kWpeso de la máquina aprox.: 0,32 tdimensiones de la máquina aprox.: 1,4 x 0,6 x 1,3 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp-Manufacturer: VEB TAKRAF, roller clamp type WSI-Clamp range: 35-70mm-Load capacity: 2000 kg-Dimensions: 620/210/235 mm-Weight: 21 kg
Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Dimensions in the pictures -Tool: for press brake -Tool: with radius 1500 mm -Beading height: 8 mm -Tool gap: 2.5 mm -Tool: is guided -Tool intermediate dimensions: 900 mm -Transport dimensions: 1200/200/H230 mm -Weight: 210kg
Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg
Hand lever shears, long knife sheet metal and round steel shears, lever shears-Manufacturer: Mubea, tin and round steel shears-Blade insert length: 150 mm-Round steel: up to 12 mm-Lever arm: with locking spring-hold-down:-Total dimensions: 320/120/H1260 mm-Transport dimension: 990/120/H310 mm-Weight: 12 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch,-Long hole punching tool: 10.5 x 23.5 mm-Stamping dimension: see photo with dimensions-Socket: Ø 30 mm-Dimensions: 230/200/H230 mm-Weight: 18 kg
Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display-from: Hammerle AP 100 press brake-Length unit: 420 mm-Number: 2x available-Price: complete-Dimensions: 550/80/H40 mm-Weight: 4.4 kg
Diámetro del tubo: bis 60 mmPeso de la máquina aprox.: 1,8 t
Section steel shears, profile shears, punch, punching machine, hole punch-Pressure force: 29 to-Punching:-Scissors:-to cut:-not:-mechanical release:-div. Punches and dies:-Length stop:-Installation dimensions: 1300/1570/H1900 mm-Transport dimensions: 1300/770/H1900 mm-Weight: 1112 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch,-Stamping dimension: see photo with dimensions-Socket: Ø 40 mm-Dimensions: 370/270/H275 mm-Weight: 67 kg
: 30 mm: 30 mmL-beam: 20 x 20 x 4 mmflat steel: 25 x 6 mmAxis diameter: 20 mmwork speed: 11 U/mintotal power requirement: 0,2 kWweight of the machine ca.: 80 Kgdimensions of the machine ca.: 0,6 x 0,6 x 1,5 mProfile bending machine with:- Foot pedal for right/left rotation- Digital display- 1 set of standard rollers- 3 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container rotating device -Roller spacing: 215 to 1470 mm -Rollers: Ø 200 mm -Load capacity: about 2000 kg -Number: 1 piece available -Dimensions: 1720/500/H500 mm -Weight: 136 kg
Stop for press brake, edging bench, guillotine shears ...-Recording with: elongated hole-Length unit: approx. 300 mm-Fine adjustment-Number: 2x available-Price: complete-Dimensions: 2x 410/320/H120 mm-Weight: 28 kg
WMT GmbH & Co. KG
