磨床 二手 出售 (2,205)

Without pallet and pallet truck. Auction-ID: A1-48301-35

Auction-ID: A1-48301-55

In its original crate. Never used. Case size: 76 x 52 x 49 Auction-ID: A1-48310-467

Auction-ID: A1-48301-75

In its original crate. Never used. Case size: 76 x 52 x 49 Auction-ID: A1-48310-468

DAREX SP2500 drill bit grinder including 3 drill bit holders. Grinding range from 1.5 mm - 26 mm, without pallet and pallet cart. Auction-ID: A1-48301-73

研磨长度：500毫米，研磨宽度：230毫米，table尺寸：51 0 x 200毫米，研磨轮直径：225毫米，机器重量约1.5吨。磁� ��板 1000x500mmwww.marcels-maschinen.ch 本广告的数据使用ModulMWS——LogoTech oHG的软件解决方案创建�

内部研磨主轴：。中心高度：240毫米，研磨长度：2500 毫米，砂轮直径：750毫米，尺寸（长/宽/高）：6000 x 3000 x 2500毫米，机器重量约9吨。内部研磨附件带研磨 spindleMisc.accessorieswww.marcels-maschinen.ch 本广告的数据由LogoTech oHG的软件解决方案ModulMWS创建�

最大打磨长度：406毫米，研磨直径：1.5 - 165毫米，主轴转速范围：200-2500 U/机器最小重量，约0.6 机型尺寸：1.3 x 1.35 x 1.5 m。本广告数据由ModulMWS——LogoTech oHG的软件解决方案——创建�

磨削长度最大：406毫米，磨光直径：1.5 - 165毫米，主轴转速范围：200-2500 U/机器最小重量，约0.48 机器尺寸：约1.3 x 1.35 x 1.5米 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

研磨长度：700毫米，研磨宽度：550毫米，工件高度：5 00毫米——表尺寸：1320 x 500毫米，研磨轮直径：400毫米，机器重量约3.9吨。磁� ��板 1000x500mmwww.marcels-maschinen.ch 本广告的数据使用ModulMWS——LogoTech oHG的软件解决方案创建�

Max. working width 900mm. Working height opening 1 – 125mm. Feed speed. Feed speed variation 2.5 – 14m/min. Electrical. Main motor 1st head 7.5kW. Main motor 1st head 7.5kW. Conveyor motor 0.75 kW. Hammer head oscillation motor 0.4kW. Lift motor 0.18 kW. Electrical connection 400Volt. Cycles 50 Hz. Control current 110V. Total Installed power of system. Approx. 20 kW. Complete with VG Mistral 215 extraction, Airflow : 5500 m3h, Inlet diameter : 225mm. Belt head –W-. Contact roller: 150mm diameter made of special Flexible” vulcanised 45º Shore rubber with special profiled grooved face suitable for deburring and finishing. Hand wheel fine adjustment in height of the head with a precision of 0.01 mm to change pressure or for abrasive belt thickness with dial indicator readout. Outboard support: unlocking/ locking quick release grinding head support for abrasive belt change. Grindin ...

Operating voltage: 220/380 VConnection: 0.9 kWRated current: 3.6/2.1 ASpeed: 2900 rpmGrinding wheel dimensions: 200/230/51 mmReference: Walter - Lot 80 Auction-ID: A7-48268-11

钢缸径容量（直径）：- 直径：- 行程毫米，总功率需求：千瓦，机器重量约：400公斤� ��机器尺寸约：平方米本广告数据由ModulMWS创建——Log oTech oHG的软件解决方案�

条带宽度：75毫米波段 长度：2000毫米波段 速度：m/最小总功率需求：千瓦，机器重量约：90公斤 ，机器尺寸约：m本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

研磨直径：- 毫米研磨长度：- 毫米中心高度：- 毫米，机械中心距：2000毫米，机器重量约7.9吨本广告 数据由ModulMWS创建——LogoTech oHG的软件解决方案�

研磨直径：- 毫米研磨长度：- 毫米中心高度：- 毫米，机械中心距：2000毫米，机器重量约7.9吨本广告 数据由ModulMWS创建——LogoTech oHG的软件解决方案�

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N- B-Achse- Kel-Set- hydraulischer Pinolenrückzug- Mikroverstellung am Reitstock- Werkstückspindelstock mit schwenkbarem Unterteil- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, P ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal grinding machine: grinding diameter: 300 mmgrinding depth: 300 mmTravel distance - Z1: 470 mmTravel distance - X1: 200 mmTilt angle - B2: 1/1000 °power capacity: 3,5 kWExternal and face grinding unit (Z2/X2): Travel distance - Z2: 470 mmTravel distance - X2: 325 mmDrive power – External grinding spindles: 16,5 kW: 120 mmgrinding diameter - cylindrical: 400 mmsanding belt length: 400 mmgrinding wheel size: Ø 500 x 50 x Ø 127 mmWorkpiece spindle unit: Travel distance - U: 470 mmTilt angle – B1 with longitudinal adjustment: -1/+12 °Tilt angle - B1 with workpiece spindle unit: -20/+30 °Manual longitudinal adjustment of the workpiece sp: 470 mmDrive power – workpiece spindle: 3,8 kWturning speeds: 1-895 U/minLoad capacity - Spindle head: 200 kgCentre height above the swing bridge: 200 mmtotal power requirement: 47 kWweight of the machine ca.: 10 tdimensions of the machi ...

研磨直径：- 毫米研磨长度：- 毫米中心高度：- 毫米直径：- 毫米长度：- 毫米工具适配器：总功率需求：千瓦，机器重量，约� ��机器尺寸，约：米本广告数据由ModulMWS创建——LogoTe ch oHG的软件解决方案�

工作面积：3 - 50 mmlip 角度：40-180 钻孔直径：3-50 mm 机器重量约：0.18 机器尺寸 约：LBH 0.9 x 1.0 x 1.40 m（含）。工件头可切换1：1 / 1：2比例（含）适用于分尖磨削的特殊网薄附件，包� �。六颚的咔嚓”（含内）。工作灯光，包括。操作手 册本广告的数据由ModulMWS创建——LogoTech oHG的软件解决方案�

filling capacity: 400 LiterUsable Volume: 300 Literfilling amount: max. 850 kgworkpiece sizes: max. 850 x 200 mmIndividual weight of workpiece: max. 30 kgturning speeds: 4.0 - 15.0 U/minInner drum width: 925 mmdrive motor: 380 Vweight of the machine ca.: 1950 kg.range L-W-H: 3100 x 1600 x 2000 mm good / well-maintained condition ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=xxnCddCmXe4Description:- LIMA cleaning machines for long concrete formwork parts, formwork clamps for flame-cutting parts, plasma-cutting parts, laser-cutting parts for punching and sawing parts- environmentally friendly, cost-saving, low-noise- drive with 5-fold V-belt via worm gear- maintenance-free spherical roller bearings- entire machine is highly soundproofed- dust extraction installed as standard- drum running time adjustable- speeds variably adjustable- the drum can be moved into a ...

研磨直径：155毫米，研磨长度：400毫米，中心高度：8 0毫米，总功率需求：千瓦，机器重量，约：机器尺寸 ，约：平方米本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

grinding length: 500 mmgrinding width: 200 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 5000 mmgrinding width: 600 mmworkpiece height: 600 mmmagnetic clamping plate, electical: 5000 x 550 mmmax. dia. of grinding wheel: 420 x 127 x 100 mmautom. vertical feed: 0,001-9,999 mmtotal power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: ca 11 x 2,5 x 3,5 moverhauled machineequipped with:- magnetic clamping plate 5000 x 550mm- hydraulic Unit- Vertical Head- inclined diamond dresser with autom. feed / adjustable speed- coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 200 mmprofile depth: 30 mmworkpiece length - max.: 2790 mmgrinding length: 2310 mmMaximum pitch of the screw: -/+ 50 °Maximum number of gears: 1-999 workpiece weight max.: 250 kgz-travel: 3000 mmx-travel: 185 mmmax. dia. of grinding wheel: 450-330 mmGrinding wheel thickness (with recess): 20-70 mmroll diameter: 120 mmSpeed of the grinding wheel spindle: 1500 - 6000 U/minWorkpiece spindle speed: 0 - 600 U/minSpeed of the pitch axis: 0-4 1/minSpeed of the dressing spindle: 1500-16000 1/minfeed speed z-axis: 0-10000 mm/minfeed speed x-axis: 0-10000 mm/mintotal power requirement: 150 kVAcontrol: Siemens Sinumerik 840D SL weight of the machine ca.: 30 tdimensions of the machine ca.: 10,65 x 5,37 x 2,75 mFeatures/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation The data for this ad was created with ModulMWS - t ...

grinding diameter: 630 mmgrinding length: 3000 mmcentre height: 315 mmgrinding wheel size: 750 x 100 x 305 mmgrinding wheel width: 150 taper: MK 6 chuck diameter: 315 mmgrinding head swivelling: 90 Gradgrinding spindle head - swivable: 30 °table - swivable: 4,30 - 6,30 Gradgrinding spindle speed: 815 / 935 U/minspindle speeds: 8 - 57 / 28 - 150 mmgrinding sp.stock-cross tvl. frwd/rear/total: 420 mmgrinding head quick motion: 80 mmtable speed -stepless-: 0,05 - 4,5 m/minworkpiece weight: 1200 kggrinding spindle drive: 22 kWControl: Siemens 840D total power requirement: 56 kVAweight of the machine ca.: 13 tdimensions of the machine ca.: 9900×2980×1875 mmThe machine is suitable for grinding cylindrical and conical workpieces usinglongitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are hydraulically oper ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Fanuc 310is total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control GE Fanuc 310isHand panel for CNC control GE FanucWenger loader optionalTurned part with automatic indexing 1°Grinding head UR 1-2-3Grinding wheel equipment left 500 x 80 mmGrinding wheel equipment right 400 x 63 mmOperating unit for one high-speed internal grinding spindle MFV / MFZHigh-frequency internal grinding spindle MFN 1090Coolant supply through the workpiece spindleDressing unit on the upper tableSwivelling holder for PCD diamond platesBasic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devicesKEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URSKEL-TOUCH on the workpiece headstock for internal and external grindingPreparations for Movomatic ESZ 400 or M ...

honing diameter: 200 mmstroke: 600 mmthroat: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuringmade for honing liners with max diameter 120mmMachine is like new because it worked only few months.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.