子类目
(三级类目)
生产厂家:
(品类: 104)
Used, the X axis is out of serviceNote: Due to the size of the machine, it is recommended to inspect the machineDisassembly and loading by buyer, disassembly possible by seller upon requestTransport dimension: approx. 5.50 x 3.20 x 3 m (L/W/H), the head section and side panels can be disassembled. Auction-ID: A7-48614-16
: neu : 2024 : 5549 : prompt, Zwischenverkauf v : Taiwan : 63830 €: 1206.39 €: 1 : 1 : 610 mm: 610 mm: 600 x 300 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 0 - 2,250 mm/min: 3 - 32 (0,001) mm: 320 mm: 5,5 kW kW: 0.74 kW: 1 kW: 1 kW: 2950 mm: 1490 mm: 2080 mm: 2200 kg: 355 x 50 x 127 mm: 1.450 U/min: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic s ...
新机
: neu : ca. 6 Monate ab Auftragse : Taiwan : 197430 €: 3731.43 €: 1010 mm: 590 mm: 1000 x 400 mm: 1000 x 400 mm: 0 -25 m/min: 0 - 4000 mm/min: 0,001 mm: 450 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3675 mm: 4055 mm: 2480 mm: 6500 kg: 423 kg: 670 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 5.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC servo mot ...
: gebraucht : 2006 : 5539 : prompt, Zwischenverkauf v : Taiwan : 55100 €: 1 : 49600 €: 1000 mm: 850 mm: 1000 x 610 mm: 1000 x 600 mm: 1000 mm: 5 - 25 m/min: 1250 mm/min: 3 - 32 (0,02) mm: 690 mm: max. 400 mm/min mm: 400 mm/min: 0.001 mm: 1450 1/min: 11 kW: 3.7 kW: 0.37 kW: 20,6 kW: 3700 mm: 4000 mm: 3250 mm: 4800 x 2830 x 2800 mm: 7400 kg: 1500 kg: 1120 kg: 1500 kg: 355 x 75 x 127 mmServo drive for grinding wheel feed, hardened and grounded slide waysGrinding wheel spindle on 6 high precision angular contact bearingsElectro-magnetic chuckCoolant equiptment with aut. paper filter and magnetic separatorOver the wheel automatic dressing device (with automatic compensation)Grinding wheel withgrinding wheel flangemachine lampMachine and equipment according to the CE-regulationsUser manual in ENGLISHNEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEELThe data for this ad was created w ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 73990 €: 1398.41 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 420 kg: 700 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 350 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2000 1/min: 5,5 kW: 0.75 kW: 1.1 kW: 1.1 kW: 2710 mm: 2428 mm: 2200 mm: 3500 kg: 975 mm: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working areagrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED mach ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 247810 €: 2100 mm: 850 mm: 2000 x 600 mm: 2x 1000 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 7710 mm: 3320 mm: 2850 mm: 6530x3200x3350 mm brutto mm: 10200 kg: 900 mm: 1240 kg: 2000 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape w ...
Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x900x1350 mmWeight: 300 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GER RS-500 Surface Grinding Machine Type: Surface grinding machine Manufacturer: GER Model: RS-500 Serial number: 85/26 Magnetic fixture plate size: 200-500 mm Longitudinal travel: 500 mm Transversal travel: 400 mm Vertical travel: 400 mm Grindstone: 250 mm Approx. machine weight: 2500 kg Approx. dimensions (L x W x H): 2000 x 1650 x 2260 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-20
Surface grinding machine from the manufacturer Jäger, type 19, built in 1981. The machine has a compact design and is ideal for precise grinding work in the workshop and industrial sector. A new Tyrolit whetstone is included in the scope of delivery. Technical Specification Mains connection: 380 V three-phase current Motor power: 1.5 kW Spindle speed: 2,820 rpm Grinding wheel: Ø 200 mm Grinding range: 300–350 mm Table size: 260 × 320 mm Magnetic clamping plate: 300 × 155 mm Transverse stroke: 150 mm Vertical infeed: manual Machine weight: 300 kg Accessories: 1 × New Tyrolit Sharpening Stone Auction-ID: A1-48591-7
Industrial surface grinding machine for machining flat surfaces. Equipped with NC control, magnetic table and sprinkler system with tray and filtration. Auction-ID: A1-48609-218
Full Mark RT 02 Surface Grinding Machine Type: Surface grinding machine Manufacturer: Full Mark Model: RT 02 Speed range: 1000 - 3000 rpm Maximum part diameter: 200 mm - 500 mm Main motor power: 2 kW - 10 kW Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-27
grinding length: 600 mmgrinding width: max. 320 mmworkpiece height: max. 500 mmmagnetic clamping plate: 300 x 605 mmhoriz. table movement: longitudinal: man. max. 750 mmhorizontal table movement: cross: max 340 mmtable load: max. 420 kgsanding disc diameter: 355 mmgrinding wheel width: 50 mmbore: 127 mmspindle turning speed range: 1500 U/minrapid traverse vertical: 400 mm/minControl: weight of the machine ca.: 2500 kgdimensions of the machine ca.: ca. 2800x2000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ELB SW3T Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3T X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. machine weight: 1500 kg Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-28
Helsanit Industrial Belt Sander Industrial Helsanit belt sander suitable for sanding, deburring and finishing metal workpieces. Equipped with a heavy cast iron construction, electric drive and robust steel chassis. Widely used for finishing welds, deburring parts and general metalworking within construction companies and workshops. Offered in used condition with normal signs of wear. Auction-ID: A1-47350-77
Model: RUA 1000 Equipment: Coolant lubrication and filtration system Accessories: Wheel flanges and supports Order: Front control panel with manual controls Status: Used condition with traces of oxidation and wear Additional information: Conventional cylindrical grinding machine with metal guards and coolant system Additional information: : Disassembly and loading at the expense of the buyers Auction-ID: A1-48609-8
Hydraulic cylindrical grinding machine / external grinding machine from the manufacturer H. Tschudin. The machine is suitable for precise external cylindrical grinding work. Technical data: Center width: 400 mm Tip height: 100 mm Grinding diameter: 200 mm Max. workpiece weight: 100 kg Machine weight: approx. 1,500 kg Footprint: 2,020 × 1,200 mm Power supply: 380 V / 50 Hz Control current: 220 V Table Table stroke: 420 mm Table speed: 5 m/min Reverse Standstill: 4 s Swivel range table: 9° Table length: 1,600 mm Workpiece spindle Swivel range: 360° Spindle cone: MK4 Spindle Passage: 23 mm Speed: 65–500 rpm Engine power: 0.4 hp Tailstock Pinole Cone: MK3 Quill travel: 20 mm Grinding spindle Grinding wheel diameter: 300 mm Disc width: 50 mm Bore: 127 mm Speeds: 1,500 rpm Engine power: 2.3 hp Infeed up to: 0.04 mm Quick stroke: 0.75 mm/rev Hydraulics Fuel tank capacity: 35 l Flow ...
ELB surface grinding machine SW 4 HA, built in 1965, for precise grinding work in tool and mould making. Robust, heavy-duty design with hydraulic table feed and large working area. Workspace Grinding length: 450 mm Grinding width: 250 mm Max. workpiece height (with new grinding wheel): 275–325 mm Table size (clamping surface): 760 × 200 mm Vertical stroke of the table: 0–30 mm Grinding spindle Grinding wheel: 250 × 25 mm Taper Mount: 5° Travels Vertical (spindle slide): 275 mm Transverse movement (spindle slide): 250 mm Swivel: 1° Electrical equipment Power supply: 380 V Three-phase current: 50 Hz Engines Grinding spindle: 1.0 hp (0.75 kW) 1400/2800 rpm Lateral feed: 0.2 hp (0.15 kW) 950 rpm Lifting/measuring carriage: 0.06 hp (0.04 kW) 2750 rpm Hydraulic: 1.2 hp (0.88 kW) 1450 rpm Facilities Electromagnetic Clamping Plate Grinding wheel dresse ...
The machine has a 1,500 × 400 mm magnetic clamping plate, a 360° swivelling grinding head, a digital balancing device/balancing display and a wide range of accessories. In addition, discus grinding is possible with the grinding head Technical data Grinding head: 360° swivel Grinding range: 1,500 × 400 mm Magnetic clamping plate: 1,500 × 400 mm Max. sanding height: approx. 600 mm Max. workpiece weight: 1,000 kg Table speed: 3–30 m/min Longitudinal feed: hydraulic Automatic cross feed: 1-20 mm Automatic vertical feed: 0.002-0.06 mm Fine adjustment handwheel: 0.001 mm/graduation Grinding wheel: 350 × 50 × 127 mm (depending on version) Grinding wheel speed: approx. 1,450 or 2,900 rpm Machine weight: approx. 7000 kg Engine power Grinding spindle motor: 11 kW Hydraulic motor: 5.5 kW Coolant pump: 0.75 kW Lubrication pump: 0.25 kW Auxiliary drives / control: 1.2 ...
Perfect PFG2550 Surface Grinding Machine Type: Surface grinding machine Manufacturer: Perfect Model: PFG2550 Year of manufacture: 1997 Table size: 500 x 250 mm Stroke: 550 x 270 mm Approx. machine weight: 1250 kg Approx. dimensions (L x W x H): 1500 x 1200 x 1300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-24
600 € 
