子类目
(三级类目)
生产厂家:
(品类: 104)
: neu : 2025 : 050068 : prompt, Zwischenverkauf v : Taiwan : 39520 €: 754.83 €: 1 : 457 mm: 450 mm: 457 x 203 mm: 450 x 200 mm: 215 kg: 500 mm: 530 mm: 5 - 25 m/min: 960 mm/min: 0,4 - 6 mm: 230 mm: 0,002 - 0,04 mm/min: 2850 1/min: 1,5 kW: 0.75 kW: 0.04 kW: 0.19 kW: 3,7 kW: 2200 mm: 1575 mm: 1950 mm: 1320 kg: 215 kg: 250 kg: 203 x 12,7 x 31,75 mmcontrol panel on swiveling armaut. vertical feedgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment 34 lt with magnetic separator and dust exhaustmanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 86820 €: 1640.9 €: 1 : 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working areagrinding wheelgrinding wheel fl ...
二手
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 525 mmtable surface area: 960 x 400 mmdimensions of grinding wheel: 350 mmtable height over floor: mm: 600 x 400 mmgrinding spindle speed: 3000 U/mintable load capacity: 1100 kptotal power requirement: 8,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,4 x 1,9 x 2,1 mSurface grinding machine- Magnetic chuck- Coolant system with filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Maximum shaft rotation speed 2880 rpm. - Maximum peripheral velocity: 35 m/s. - Maximum length of the knife head 250 mm. - Wheel diameter 150 mm. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1700 x 1100 x 1900 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-37
: neu : ca. 6 Monate ab Auftragse : Taiwan : 48720 €: 930.55 €: 610 mm: 600 mm: 610 x 305 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 1.100 mm/min: 1 - 12 mm: 370 mm: 1.5 kW: 0.004 kW: 0.19 kW: 7,4 kW: 2670 mm: 1810 mm: 2050 mm: 2100 kg: 355 x 50 x 127 mm: 1.450 U/min: 3,7 kW: 4 mm: 0,02 mm: 0,2 mm: 0,002 mmcontrol panel on swiveling armaut. vertical feedhardened slide ways in all 3 axes with needle rollersgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatormanual extractor with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Total installed power approx. 1.10 KW. - Disc diameter from 100 mm to 650 mm. - Disc shaft diameter from 6 mm. - Disc thickness up to 6 mm. - Tooth pitch from 7 mm to 100 mm. - Angle of attack up to -10°. - Clearance angle from 0°. - Diameter of the abrasive disc from 100 mm to 125 mm. - Peripheral speed up to 23 m/s. - Coolant pump flow rate 48 l/min. - Coolant tank capacity 48 l. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1300 x 900 x 2050 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-36
: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 €: 300 x 40 x 51 mm: 2,2 kW: 1250 1/min: 42 mm: 540 mm: 530 mm: 1180 mm: 800 x 600 x 1400 mm: 90 kgWith machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779)Quiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVE:Version without suction (Art. 317.776)Version without stand, suction and brake/emergancy push button (Art. 317.764)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Special feature: Stepless grinding wheel speed for copper grinding work Auction-ID: A7-48614-20
: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...
Saw blade diameter: 100 to 1720 mmTooth pitch: 7 to 110 mmRake angle: -20° to + 45° Clearance angle: 8° to 45°Grinding wheel Ø100 mmSpeed grinding spindle3,600 rpmTotal weight approx. 550 kg Auction-ID: A7-48614-8
Feeding takes place on the side of the top of the grinding head and handwheel for the transverse feed path of the grinding wheelGrinding length: 820 mm, longitudinal feed of the grinding carriage with three-phase motor: 380 V. Water cooling works WITHOUT a pump, because the grinding wheel runs sideways in the water. Auction-ID: A7-48614-6
Conversion to Linux CNCworking area: 1150 x 600 mm, table: 3400 long, weight: approx. 2500 to 4000 kg. Auction-ID: A7-48614-18
Weight: approx. 18 tgrinding length: approx. 4.10 m longBed: 7300 mm longincluding: segment grinding head, the original grinding spindle has already been ground over, the plain bearing has to be adjusted, a butt head is supplied to process the bending beams. Auction-ID: A7-48614-19
Saw blade diameter: minimal. 80 mm up to a maximum of . 710 mm Tooth Pitch: 3 mm to 25 mmMaximum. Saw blade thickness: approx. 6.5 mmWorking speed: infinitely adjustableGrinding wheel diameter: 200 mm Working speed: infinitely adjustable, usually between 10 and 45 teethWeight: approx. 600 to 1200 kg. Automatic chamfering of both bevels in one rotation Auction-ID: A7-48614-7
20 € 
