Центральная ширина примерно 800 мм, высота центра примерно 150 мм, зажимная втулка, башня для замены инструмента, ручная задняя каса, мощность 4,0 кВт,
Clamping installation to clamp and pull together outside of plastic during welding Auction-ID: A1-47997-88
380 Volts. Saw blade diameter 300 mm. Auction-ID: A1-47997-84
Alumnium - iron - plastic miter saw Auction-ID: A1-47997-98
Lusardi ELUS-400 vertical metal band saw. Industrial machine equipped with an adjustable work table, blade guide and cutting speed selector depending on the material. Suitable for cutting ferrous and non-ferrous metals as well as straight and shape cuts. Auction-ID: A3-43553-38125
Self-propelled hydraulic clinker holder equipped with an 11.4 kW Lister-Petter diesel engine. This machine is specially designed for transporting, handling and moving clinkers, pavers, curbs and other road materials on construction sites. The equipment has a hydraulic holding system allowing the safe transport of loads while facilitating their installation. Its compact design and high maneuverability make it particularly suitable for outdoor landscaping, paving and curbing work. The hour meter shows approximately 2,482 operating hours. Used machine with normal traces of use consistent with its age and activity. Sold in the condition it is in at the time of sale. Auction-ID: A3-43552-37018
JPC HT13 crawler mini excavator, equipped with a 7kW KOOP Euro 5 diesel engine. With an operating weight of 1,350 kg and a compact width of 980 mm, the machine is ideally suited for earthmoving, trenching, landscaping and work in confined spaces. The machine is equipped with an earthmoving bucket, a front dozer blade and an operator protection roof (ROPS). Its maximum earthmoving depth is 1,850 mm, providing excellent versatility for routine construction and development work. 2025 manufacturing machine, in very good general condition and close to new. Shows few signs of use. CE marking present. Serial Number: 2025010085. Auction-ID: A3-43552-37016
Water tank 6200L - Reinforced base - Built-in floor hooks - Removable sides - Unused Auction-ID: A3-43553-16604
JPC KV12 tracked mini excavator, equipped with an HPR diesel engine developing 12 HP (8.9 kW). With an operating weight of 1,070 kg and a compact width of 950 mm, this machine is ideal for earthmoving, trenching, landscaping and construction sites requiring a compact and easily transportable machine. The machine is equipped with an earthmoving bucket, a front dozer blade and a driver's station protected by a ROPS roof. Its maximum earthmoving depth is 1,650 mm, providing excellent versatility for routine work. 2025 manufacturing machine, in very good general condition and close to new. The original protections are still present on the seat. CE marking present. Serial number: 2025040084. Auction-ID: A3-43552-37017
(dr) Crane with 3 bins (dr) Hydraulic quick coupler CW10 (dr) Long arm (dr) papers available (dr) Start, drive and do what it's supposed to do Auction-ID: A3-43552-11425
Machine starts, works and performs all functions. Hydraulic quick coupler CW10 Backlash Demolition-sorting grab pipes Auction-ID: A3-43552-11868
Sea container 20ft as good as new both inside and out. 20ft shipping container as good as new, both inside and out. Auction-ID: A3-43553-19601
Power VTH-380 Skid Steer Loader Plus with Hydraulic Grapple Bucket – 2022 Description Power VTH-380 Plus Skid Steer Loader equipped with a hydraulic grapple bucket. This compact machine is ideal for material handling, loading, cleaning, recycling, agriculture and landscaping jobs. Thanks to its small size and high manoeuvrability, it can be used in tight spaces while maintaining excellent working efficiency. The machine is equipped with a rear operator platform with double joystick controls and a hydraulic grapple allowing the handling of wood, green waste, branches, manure and other bulk materials. The hour meter shows about 300 hours, however this reading is not representative of the actual use of the machine. Indeed, the hours accumulate when the ignition is left on, even without actual use. In view of its general condition, the machine has worked very little and is in a conditi ...
Neat bobcat 435 with very few hours (410h original). Normal signs of wear. Incl excavator bucket 2x+breaker hammer Auction-ID: A3-43552-17113
Gantry CNC machining center TH. Kekeisen UFF 6000/13, year 1994, equipped with Heidenhain TNC 425 numerical control, automatic tool magazine, large work table, integral protection enclosure, hydraulic unit and Mayfran International chip conveyor. Accessories included: The storage cabinets visible in the photographs are included in the sale. The equipment, accessories and supplies present in the drawers at the time of the inspection are also included in the lot, according to the photos available. No detailed inventory has been carried out. Operating status: The machine has been shut down for about two years. According to the seller, it was fully functional when it was turned off. Since then, it has not been used or tested. Work to be planned: A complete upgrade of the electrical installation is necessary. The cost of this modernisation is estimated at around €40,000 excluding tax, ...
750 €
