підкатегорій
(рретій рівень категорії)
Виробник:
(Категорія: 706)
Overview This shrink packaging machine (film only) was manufactured in 2001 by Italy SMI. The SMI LSK 45 is designed for film-only shrink wrapping of bottles in beverage production lines. The machine operates with 4 infeed lanes and supports multiple pack configurations and bottle formats. It was fully operational prior to dismantling in January 2026 and is currently dismantled. The machine is supplied with technical documentation. Technical data Capacity: approx. 45 packs/min Formats: 3×2 / 3×3 / 4×3 Bottle formats: 500 ml / 1,000 ml / 1.5 L / 2.0 L Application: Shrink packaging (film only) Configuration: 4-lane infeed system, shrink film wrapping unit, shrink tunnel Scope of Delivery Shrink packaging machine | SMI | LSK 45 | 2001 | Film-only shrink wrapper with 4-lane infeed Shrink tunnel | SMI | 2001 | Integrated shrink tunnel Conveyor system | With lane separ ...
Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW
Overview This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Avai ...
Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With it ...
Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery Labelling machine | GERNEP ...
Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm
Overview This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment
Overview The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope Worked with tray/cartons of 8 units (4x2) Pallet loader With shutter head Incl. protective fences, pallet transport, tray transport, tray turner, formation table, empty pallet magazine
Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing. The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as ...
Overview The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative. Technical data Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable
Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL
Overview The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours
Overview The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16
Overview This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997
Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...
Kronkorker 29mmLaufrichtung links rechtsMore then 300 machines new and second hand on our seema .de
Overview (H2) This CIMEC S1/2 ADH labeling machine was manufactured in 2012 and is designed for labeling long-neck bottles in the formats 33cl, 50cl and 27.5cl. The machine achieves an output of up to 2,500 bottles per hour and is already disassembled and available at short notice. Technical details (H3) Output: 2,500 bottles/hour Bottle formats: 33cl longneck 50cl longneck 27.5cl longneck Machine rotation: clockwise Bottle holders: 6 plates Labeling stations: 2 self-adhesive label dispensers Power supply: 380V / 3-phase / 50 Hz Power consumption: 2 kW Machine weight: approx. 1,200 kg Bottle sizes: Height: 200-380 mm Diameter: 50-120 mm Label sizes: Front label: width 50-240 mm, height max. 140 mm Back label: width 50-140 mm, height max. 140 mm Max. Paper feed height: 150 mm (optional 195 mm) Max. Label width at maximum speed: 150 mm
Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational
Overview The pallet wrapper was built in 2007 by Italian manufacturer Robopac. The machine was used in a water and CSD production plant where it was part of a PET filling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical details Capacity: about 60 pallets by 23 wraps Working hours: 45 363 Pallet top cover function + Upper pressing unit Scope of delivery Pallet wrapper Belts, rollers Sensors on conveyor belts (infeed, outfeed, diagonal). Spare parts (new and used) Documents
Overview This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person. Scope of delivery Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014
Огляд Ця лінія наповнення пляшок MONO-BLOCK була побудована компанією KOHEM (нині CIMEC) у 2014 році. Він працює ідеально і добре доглянувся. Наразі він розібраний і зберігається. Формати пляшок: 33 кл довгої шийки, 75 кл «шампанський» і 375 кл шампанського. Потужність становить 1000-1300 bph при 33 cl довгих шиях. Оснащений пневматичним розчином для розвантаження. Список машин Машина для маркування (2014) Виробник: CDA Модель: R1000 Filler Capper (2014) Виробник: Kohem (тепер Cimec) Модель: RIS 8/1 - DPS
Overview This complete filling line for non-returnable PET bottles was manufactured 2006 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line and dedicated to produce fresh milk. The line is designed for milk production, handling up to 9,000 b/h and is in a good condition. The equipment becomes available as the seller dediced to commit the milk production to an external company and continue only the cheese production in the factory. Technical Information Product: Fresh Milk Container Material: PET Bottle Format: 1,0 L Nominal Speed: 9.000 BPH Neck Finish: 38 mm Label Type: OPP Rollfed Packaging: 16 bottles per crate Pallet Type: Europallet 800 x 1200 Scope of Delivery Blowing Machine | Krones | Contiform S8 | 2006 Preform Tipper | TM | KPT | 2012 Air Conveyors (~100 m, 9 fans) | Krones | AirCo | 2009 Filling Monoblock (Neck Handling, 32 valv ...
Overview This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by In.VIA (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data Capacity: Approx. 80 hL/h Filtration system: Diatomaceous earth Tank: Pressurized stainless steel Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump Valve system: Stainless steel, precise flow control Design: Mobile filtration unit with integrated control system
Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018. List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP ball ...
Огляд Ця машина для маркування була створена у 2005 році компанією Gernep. Він працював на заводі з виробництва фруктових соків у Німеччині до 01/2022. У цій компанії він використовувався лише в однозмінній роботі близько 100 днів на рік, тому стан машини досі дуже хороший. Технічні характеристики: Ємність: 6 000 b/h при 1 L Кількість заповнювачів: 2 Аксесуари: Формати для скляних пляшок 1,0 л VdF, 0,7 л VdF, 0,2 л скляних пляшок, шийка зоб Різні запасні частин
Огляд Ці ферментаційні баки були виготовлені у 2020 році німецькою компанією Speidel. Вони сертифіковані CE, оснащені охолоджувальною оболонкою та розраховані на тиск до 2,5 бар. Резервуари в хорошому стані і доступні негайно. Технічні дані Місткість: 2 × 1 250 літрів Номінал тиску: 2,5 бар Охолоджувальна оболонка: Так Сертифікація: CE Обсяг поставок 2x 1 250-літрові ферментаційні баки
Overview This semi automatic sixpack packaging machine was manufactured in 2018 by the german manufacturer WestRock. It is a multipacking machine, ideal for small operations. The machine is in a good condition and immediately available. Technical data Capable of running baskets and wraps on same machine Simple, mechanical drive system Can be configured for bottles (glass, aluminum or PET), cans, bricks or cups (loose or attached) Single height between 40mm & 250mm Single diameter between 40mm & 112mm package format: 2x2 through 2x6 capacity: 10 packs/minute Power: Compatible with standard 110V or 220V power supply Single operator changeover in less than 5 minutes adjusted for formats: NRW 0,5L; Stubbi 0,33L; LN 0,33L; expandable by format parts
Огляд Машину побудувала іспанська компанія Seppelec у 2007 році. Машина досі збирається, але не використовується, оскільки завод закрив виробництво. Перед виведенням з експлуатації машину інтенсивно обслуговували та тестували з фосфоресцентним матеріалом. Техн. Деталі Ємність: 13 500 л/год Тиск для запобігання дегазації: 7 бар Температура при пастеризації: 85°C Документація машини Пластина теплообмінника | SPX Flow | H17 | Керування 2013 року: процесор Siemens S7-300 314 2dp Тип порту зв'язку: Profibus
Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details Capacity: 4.000 bph 4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.
Огляд Відцентровий сепаратор типу SB80-06-076 від виробника GEA Westfalia раніше використовувався на пивоварні в Естонії. Через повне закриття виробничого заводу цей пристрій виставлено на продаж. До закриття фабрики сепаратор використовувався часто. Технічні характеристики 4500 об/хв з самоочищуваним барабаном Аксесуари Запасні частини Інструмент
