Practical Peecon ground bucket for mounting on the three-point linkage of an agricultural tractor, offered in combination with a mechanical auger. This lot is suitable for a variety of work on farms, riding stables, construction sites and private land. The Peecon soil bucket can be used for moving, leveling and extending soil, sand, crushed stone and other loose materials. Thanks to its sturdy steel construction, this bucket is a versatile tool for maintenance and off-road work. The box shows signs of wear, corrosion and wear commensurate with age and use. The ground tray is 200cm wide. Also included is an auger with spiral drill point, suitable for drilling holes for posts, fences, tree plantings and other earthworks. The drill comes with a support frame and drive unit. This one does not have a cardan shaft. Auction-ID: A3-46077-14787
Joskin Trans-KTP 22/50 agricultural tipper (2006). 2-axle tandem chassis, 22 ton GVW, Hardox body, rear hydraulic tilting. Equipped with a parking stand, access ladder and hydraulic fittings. Recently replaced tipping cylinder jam. Normal wear and tear from agricultural use, surface corrosion and wear marks. General structure in good working order. Auction-ID: A3-46077-37035
Option Road registration, Tilting backwards, Loading capacity (kg): 25000, Dumper chassis: Tandem axle, Option Hydraulic tailgate, Body full HARDOX, bottom 8 mm, side walls and tailgate 6 mm, Stainless steel bottom corners along the side walls, Double profiled top edge, Double acting hydraulic tailgate, top hinged, Telescopic tipping cylinder, hard chromed lower step, max. working pressure 250bar, Hydraulic triangle suspension with maintenance-free rubber bearings at triangle, panhard rod and cylinders, Air brakes, 2-line with ALR, Hydraulically sprung drawbar, Scharmüller K80, LED rear lights, LED side lighting and 1 flash lamp at rear, BPW axles, 150 mm, 10-hole, brakes 410×180 mm Auction-ID: A1-47377-17
Equipped with: Veenhuis agricultural tipper 10 tons, type: 8000, year of construction: 1987, serial number: 2588, tandem axle version, hydraulic tipping system, hydraulic brakes, hydraulic support leg, French rear panel with grain scraper, attachment plates available, Dutch registration available, lighting available, length: approx. 6.3 m, width: approx. 2.4 m, height: approx. 2.3 m (incl. attachment signs) Auction-ID: A1-47377-221
Equipped with: New Garmech tipping trailer, capacity of 2.5t, adjustable tow bar, jockey wheel, side panels with closed profile tubes, bulkheads can be disassembled, tailgate with top and bottom hinge. Auction-ID: A1-47377-177
Equipped with: HIAB Truck-mounted crane with rotator and remote control (type: XS144 D3), scale grab, Dutch registration, support legs (extendable front spread up to 260cm), rear doors, storage boxes, forced steered, hydraulic valve, air braked, thistle suspension, hydraulic boom length up to 1030cm, PTO included Auction-ID: A1-47377-27
Equipped with: hydraulic support leg, air brakes, control box, Belgian papers, hydraulic tailgate, rear bumper, drawbar coupling with air brake connection, work lighting, twist locks on chassis, thistle suspension, BPW axles, Tridec suspension Auction-ID: A1-47376-57
This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for road and operational safety; Auction-ID: A1-47917-13
No nameplate available ; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for road and operational safety; Auction-ID: A1-47917-14
Drum screening plant, screening machine, drum screen, sorting plant, vibrating screen, vibratory screen, vibrator, sorting system, classifier, control screening machine, analytical screening machine, separation plant -Manufacturer: Horstkötter -Type: Drum cleaner TTR630 -Sieve: Ø 700 x 1060 mm -Sieve inclination: adjustable -Drive: 0.37 kW 35 rpm -Dimensions: 1600/1300/H2130 mm -Weight: 414 kg
Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed
Power trowel, concrete trowel, screed trowel, concrete troweling machine, power trowel -Manufacturer: Noggerath, Hand-operated concrete power trowel type G 850 E -Power: 2.4/1.5 kW / 2820/1425 rpm -Plate diameter: 900 mm -Transport dimensions: 1550/1000/H1130 mm -Weight: 88 kg
Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg
- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg
Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested
Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg
Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm -Weight: 100 kg
- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg
Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E-E-motor: 2.0 / 1.35 kW-Plate diameter: 700 mm-Transport dimensions: 1040/780/H1300 mm-Weight: 69 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E-Power: 2.4 kW-Plate diameter: 790 mm-Transport dimensions: 1190/1000 / H1410 mm-Weight: 87 kg
Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg
Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg
Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators-Frequency converter-Power: 2.8 kW-Output: 42 V-Frequency: 200 Hz-Dimensions: 1160/600/H720 mm-Weight: 74 kg
Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg
Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg
100 € 
