підкатегорій
(рретій рівень категорії)
Виробник:
(Категорія: 706)
Огляд Скляний депалетизатор був виготовлений німецькою компанією KHS у 2005 році і до недавнього часу був частиною лінії розливу в німецькій молочній компанії. Піддони зараз випускають, оскільки власник зупиняє виробництво. Технічні деталі/приціл Депалетизатор з підйомом і скиданням внизу З проміжним засобом для зняття шарів і магзином З затвором для верхнього шару/кришки Закриті конвеєри можуть знімати окремо по одній смугі для формованих пляшок, включно з захисними огорожами, трансп ...
Overview This bottle washer was manufactured in 1999 by Italian company BODINI (model 201-10/66-11V). The machine is used for lemonade and syrup applications and has been maintained every 6 months by the owner. It remains in production until February 2026, where it can also be visited. After production stop, it will become available for removal. Technical data Capacity: 4,500 bph Formats: 1 L 75 cl 33 cl Dimensions: 6.7 m × 2.2 m 0.5 m conveyor ≈ 2 m height Heating system: Electric heating system, 165 kW Power consumption: 160 kW with electric resistance 10 kW otherwise Air supply: 5 bar
Overview This pallet stretch wrapping machine with conveyors was manufactured in 2012 by Not provided Tosa Group Bande Releuse. The machine is designed to secure palletized loads with stretch film for transport and storage. The system applies controlled film tension to ensure load stability and protection during handling and logistics operations. The machine is currently stopped (idle for one year) and remains installed and operational. Technical data Capacity: 25 pallets/hour Application: Pallet stretch wrapping Configuration: Stretch wrapping machine with integrated conveyors
Огляд Ця напівавтоматична машина для наповнення та наповнення була виготовлена у 2005 році італійською компанією Officine Pesce. Раніше його використовували у виноробстві, а зараз він продається через недостатнє використання. Технічні дані Виробник: Officine Pesce S.n.c. Модель: PG 97/M4 Рік: 2005 Напруга: 220 В Частота: 50 Гц Система наповнення: Напівавтоматичні компоненти: Накопичувальний бак Наповнення крана Електромеханічний клапан Пластини для утримання пляшок Панель керування блоком кришки Механізм кер ...
Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...
Система дозування Velcorin була розроблена компанією Lanxess для приготування напоїв. Система має дозувальний насос, який точно дозує консервант Велкорин і розроблена для промислового використання. Система вже розібрана і готова до збору. Технічні деталі Ємність (об'єм напоїв): 6 000 - 36 000 л/год Швидкість дозування: до 20 мл Велкорин / гл Витратомір Endress + Hauser Додаткова інформація за запитом.
Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with ...
Overview This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data Capacity: 20 hL gross / 18–19 hL net Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool Max. mash load: 600 kg Average efficiency: 83% Average lautering time: 2 hours Heating system: Double steam jacket (lateral + bottom, independent) Max. pressure: 3 bar Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperat ...
Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) Machine diameter: 1,320 mm Pitch: 125.60 mm Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) Platform rotation: Motorized belt (R version) Ma ...
Overview The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003 Preforms feeder Preforms tipper Transporters | AVE | 2004 Injection and blowing | Nissei ASB | PF4-1BH |2000 Dryer Moretto | 2000 Loader Moretto | 2000 Heater Moretto | 2000 Transporters | AVE | 2004 Lot Coder | Marken | Smartlase 110i | 2009 R ...
Overview The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time. Technical details Number of filling places: 48 Pitch circle diameter: 1560 mm Capacity (last): 250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized 160 - 200 bottles/ min at 250ml maple syrup Used plastic cap can be applied by installed AROL capper Dimensions Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg Electr. characteristics Voltage: 400 V - 50 Hz Auxiliary voltage: 24 V DC Installed power: 20 kW Scope of delivery Filler | ...
Огляд Машина для чищення пляшок була виготовлена німецькою компанією Krones у 2011 році. Він працював у великому виробнику напоїв до останнього року і досі збирається. Технічні деталі Ємність: 20 000 bph Формати: 0,25l і 0,75l Кількість пляшок у ряду: 22 Siemens S7 Обладнання Вихід етикетки Роторне розпилення Безперервна машина Корпус з нержавіючої сталі Документація Програмне забезпечення Резервне копіювання Насоси з нержавіючої сталі Вимірювання провідності Пальцеві завдання Запасні частини Насадк ...
Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Ma ...
Overview This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model ...
Overview The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details Output: approx. 8,500 bottles/h Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.
Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available
Виконання: Максимальний тиск: 10 бар Кількість свічок: 24 Висота : 30" Адаптер: 7 (Код: 25) Прокладка: Силікон Спорожнення : none Вентиляція: TC 1.5" Поверхня: механічно полірована Вхідно-вихідне з'єднання: DIN 11851 Male Part DN80
Огляд: Виготовлений у 2004 році німецькою компанією Dr. Datz Maschinenbau GmbH, цей надійний 24-головковий ковпак для започатків дротів призначений для надійного герметизації дротових затворів на пляшках. Високоякісна машина німецького виробництва, ідеальна для ефективних і точних операцій наповнення на лініях розливу. Технічні деталі: Виробник: Dr. Datz Maschinenbau GmbH Тип: BVM 24R Рік виробництва: 2004 Кількість закриваючих станцій: 24 Тип закриття: дротяні застібки Напрямок машини: зліва направ
Overview This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h
Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data Filling points: 2 Filling valve diameter: mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry
Overview The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored. Technical Details Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...
Overview This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc) ...
Огляд Етикетер був виготовлений у 2009 році італійським виробником PE Labellers. Машина в хорошому стані, вже професійно розібрана і зберігається на складі. Техн. Деталі Ємність: 12 000 bph Адаптовано для: 1.0L та 1.5Робоче значення: вхід ліворуч – вихід праворуч (проти годинникової стрілки) Кількість головок маркування: 12 Положення етикетки: обгортання Матеріал етикетки: OPP з гарячим плавом Привод машини: Siemens S7 Оброблені та форматні інструменти, включно з 0.25L – 0.50L – 1.0L
Overview This complete 600L brewhouse and fermentation line was manufactured between 2009 and 2014 by Cespedes (Spain) and Cerveza Artesana SL. It includes mashing and boiling kettles, fermenters (both isobaric and atmospheric), utilities, and packaging equipment. The line was used for small-scale craft beer production and remains in good overall condition, available immediately. Technical data Main Manufacturers: Cespedes, Cerveza Artesana SL, Stellin, Duofiller Year of Manufacture: 2009–2014 Capacity: 600L brewhouse / fermenters up to 1,200L Heating System: Electric resistances (mash & boil kettles) Filling System: Semi-automatic can and bottle filling Utilities: Includes pumps, heat exchanger, and carbonation equipment Condition: Good, complete and ready for installation Scope of Delivery Mashing tun | Cespedes | – | 2010 | Dimensions in cm: 200×110×110 | 600 L, electrically ...
Огляд Аплікатор ручок був виготовлений німецькою компанією Automation & Engineering GmbH у 2001 році і до недавнього часу був частиною лінії наповнення PET у великому німецькому виробнику безалкогольних напоїв. Аплікатор з ручкою зараз випускається. Технічні дані Загальна потужність: 70 циклів/хв Електричне з'єднання: 400V/N/PE/50 Hz, 5,1 кВт Два смуги Додатковий інформаційний конвеєр для пакеті
Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately. Technical details Capacity: 9000 containers/h (varies according to bottle volume and product). Container Max. Diameter: 100mm Max. Height: 300mm Control Siemens S7 Single machines Bottle Hopper | ALWID | POSIMAT-ACCESS-N15 Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...
Overview This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details Output: approx. 350-400 cans per hour Formats: 330 ml (Sleek); format parts for 440 ml included Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing Seaming: Integrated single-head can seamer Power supply: 0.8 kW, 220V, 50 Hz Compressed air consumption: 180 L/min at 6 bar Dimensions (L x W x H): 1100 x 1130 x 1160 mm Weight: 280 kg
Огляд Наповнювач під тиском був виготовлений у 2013 році німецьким виробником KHS. Наповнювач під тиском досі використовується на великій німецькій пивоварні і може бути перевірений у будь-який час. Технічні дані Потужність: 22 000 - 65 000 bph Кількість заправних станцій: 168 Кількість станцій заповнення заправки: 24 Наповнювач з колом по схилу: 5040 мм Обсяг подачі Вузол клапана Вакуумний блок Гігієнічний вхід Перевірка рівня заповнення та закриття Стрічка відкидання та відходу Технічна документ ...
Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected. Technical data filling and capping machine as a block system number of filling stations: 132 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps cap feeding system: Gassner capacity: 36.000/h at 1,0L including neck handling system bootle lifting cylinders direction: left-right / clockwise
Overview This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...
