шлифовальные станки подержанные на продажу (2,321)

Double bench grinder, bench grinder, column grinder, column grinder-Motor power: 1.35 kW-Speed: 1500 rpm-Max. Grinding wheels: Ø 300 x 40 mm-Operating voltage: 380 volts-Dimensions: 730/400/H1075 mm-Weight: 156 kg

Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate-Clamping surface: 100 x 100 x 300 mm-Dimensions: 100/100/H360 mm-Weight: 18.4 kg

grinding diameter:600 mmgrinding length:3000 mmcentre height:315 mmworkpiece weight max.:3000 kgwork piece spindle speed:8 - 120 U/mingrinding wheel motor:25 kWgrinding wheel speed:45 m/secgrinding wheel width x diameter:750 x 80 mmtable speeds:30 - 4500 mm/minfeeds of grinding head:0 - 5 mm/mintable swivelabel +/-:7,5 °total power requirement:55 kVAweight of the machine ca.:18 tdimensions of the machine ca.:11,5 x 4 x 2,2 m- Internal grinding device- taper grinding up to 10,1° based on diameter- automatic grinding cycle- grinding wheels and flanges- dressing device- coolant attachment- dust exhauster, various steady rests

Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

grinding length:600 mmgrinding width:300 mmworkpiece height:450 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2,8 x 3,0 x 2,0 mgrinding spindle speed:1440 / 2905 U/minwith magnetic plate 600 x 200 mmautom. vertical feed coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 51 mm -Outer diameter: Ø 250 mm -Width: 40 mm -Quantity: 1x disc available -Weight: 4.1 kg

Equipped with: Husqvarna K3600 Mark II (2013) is a hydraulic ring grinder with approx. 4.3 kW output, blade Ø 350–370 mm, maximum cutting depth ±270 mm and working pressure up to 150 bar (oil flow ±35–40 l/min) with additional new grinding blade. Hycon HPP18 (±2009) is a hydraulic power pack with a petrol engine of approx. 18 hp (±13 kW), an adjustable oil flow rate of approx. 20–40 l/min and working pressure up to ±120–160 bar for driving concrete sawing and drilling equipment, with 20

Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder -Clamping angle: for tool grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 150/150/H215 mm -Weight: 8.2 kg

grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.

workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine-Inside: Ø 51 mm-Outer: Ø 200 mm-Width: 19 mm-Number: 1x discs available-Price: per piece-Weight: 1.2 kg

Grinding length max. 600 mm, grinding width max. 200 mm, grinding wheel dimensions 250x25x51 mm, circumferential speed 35 m/s, longitudinal table feed 1-24 m/min, table transverse feed 10-1000 mm/min, table load incl. magnetic clamping plate max. 100 kg

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding diameter:380 mmgrinding length:1000 mmcentre height:180 mmgrinding wheel diameter:400 mmmax. workpiece weight between centres:250 kgtotal power requirement:10 kWweight of the machine ca.:4,1 tdimensions of the machine ca.:3 x 2 x 1,6 mwith internal grinding attachmentwith fixed and swivelling headstockwith coolant tank

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

Double bench grinder with table

Magnetic roller, magnetic roller, magnetic separator, cooling water skimmer -Magnetic roller: Magnetic separator with rubber roller -Magnetic roll: Ø 130 x 310 mm -Rubber roller: Ø 68 x 310 mm -Dimensions total: 440/400/H240 mm -Weight: 26 kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: 300 mm -Width: 12 mm -Price: per piece -Quantity: 3 available -Weight: 1.7 kg

Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder -Manufacturer: Wilhelm Simon, 2-station tool grinding machine -Motor power: 1 kW -Speed: 2800 rpm -Grinding discs: Ø max. 150 mm -Coolant system: Pump missing, can be replaced for an additional charge -Dimensions: 1430/780/H1380 mm -Weight: 456 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine-Inside: Ø 32 mm-Outer: Ø 150 mm-Width: 25 mm-Number: 2x discs available-Price: per piece-Minimum purchase: complete-Weight: 1 kg