Производитель:
(Категория: 108)
Wire feed unit welding rack Auction-ID: A1-41989-39
Consisting of; Welding machine: Cloos GLC356-B Series number 202 Welding machine: Bester Magster 500 Series number 643366 Tig Welding machine SAF Nertabloc TH260P Plasma cutter SAF nertajet Zip all in working condition Auction-ID: A1-41989-135
Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44803-243
Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44802-294
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44802-65
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-255
Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44803-294
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-65
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44802-255
Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-44802-243
Special set 93 pieces, 28mm systemincl. tool trolleyMaterial: burnished quality steelScope of delivery see picturesNumber 93 PositionsWeight 320 kgCondition newHole diameter 28 mmDimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-44764-215
Set 1 - 33 pieces, 28mm system, consisting of:12x quick-release bolts with twist lock short, without O-rings 4x universal stop 150 L - Nitrided 4x universal stop 225 L - Nitrided 2x stop and clamping angle 175 L - Cast iron 2x stop and clamping angle 300 G left - Nitrided 2x prism Ø60-135° burnished - with collar complete with blade and countersunk head 4x Professional screw clamp - Nitrided 2x Professional screw clamp 45°/90° - Nitrided 1x accessory set consisting of: eccentric, Allen key, brush, whetstone, Probe CleanBasic, Probe non-stick and torch holder. Condition: never used / new (5) Auction-ID: A7-44764-128
Welding helmetProtection level 9 -13 MPower supply 2 x CR2032 Weight 460 gramsDimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-44764-167
Set 4: 110-piece, 28mm system, consisting of:Clamps: 14 x 280610.NClamps: 10 x 280630.NPrism: 6 x 280648.1.NBolts: 30 x 160511Magnetic bolts 8 x 280740Stroke: 10 x 280410.NStroke: 10 x 280420.NStroke: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Number 106 PositionsWeight 283 kgCondition newHole diameter 28 mm Auction-ID: A7-44764-159
Welding table \"SIGMUND Professional 750 + Plasma Nitrided\" is made of high-quality steel S355J2+N.Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 2400 mmTable width 1200 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.99 tDimensions L x W x H 2.4 x 1.2 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-32
Siegmund workbenchPerforated plate made of high-quality steel S355J2+N + plasma nitriding- 16 mm hole- Holes in 50x50 mm grid- Material thickness approx. 12 mm- Height adjustable from 800 to 975 mm- Frame made of aluminium profilesTable length 1200 mmTable width 800 mmTable height 800-975 mmTable load 250 KgMachine weight approx. 108 KgDimensions L x W x H 1.2 x 0.8 x 0.85 m Condition: never used / new (5) Auction-ID: A7-44764-236
Workstation- Hole diameter: 28mm- Grid 100 x 100mm- Side walls 150mm- Table thickness 10mmTable length 1200 mmTable width 800 mmTable height 980 mmLoad capacity kgMachine weight approx. 0.95 t Auction-ID: A7-44764-10
Welding table on lift table: Hole diameter: 28mmThe table is made of 15mm thick steel S355The surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mmRibbed underside for reinforcement.Table length 1300 mmTable width 800 mmLoad capacity 1000 kgLifting height 510 - 1550 mmTotal connected load 1.5 kWConnected voltage 230 VMachine weight approx. 0.55 tCondition: never used / new (5) Auction-ID: A7-44764-27
Clamping plate1400 x 1200mmHeight 200mmGroove 38 x 38mmsee pictures Auction-ID: A7-44764-21
Welding turntable with- foot switch- tilt/swivel by hand- speed infinitely adjustable- welding current transmission - hole in face plate 30mm, 20mm deep.- Documentation in English only. Table diameter 330 mmTable load 220 kgSwivel range 135 degreesTilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variableTable load 100 kg. verticalTotal power requirement 0.125 kW Condition: never used / new (5) Auction-ID: A7-44764-76
Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, which allows thetable to be moved with a pallet truck.The accessories shown are optional Table length 2000 mmTable width 1000 mmTable height 850 - 900 mmMachine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-44764-88
MAG welding machine with:Hose package 3mwelding current max. 250A Connection voltage 400 VWeight 170 kgDimensions LxWxH 700 x 450 x 750 mm Condition: untested (6) Auction-ID: A7-44764-211
Basic set 3 / 43 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps12 pcs quick clamping bolts6 pcs universal stop 150mm4 pcs universal stop 225mm2 pcs universal stop 100mm2 pcs stop and clamping angle 175mm2 pcs stop and clamping angle 275mm2 pcs prisms 60mm1 pc eccentric stop 100mm diameter1 pc torch holder1 pc hole brush 30mm2 pcs release lotion 500ml, on natural, biological basis2 pcs. welding table cleaner 500ml, on natural, biological basis Condition: never used / new (5) Auction-ID: A7-44764-168
Container turning deviceincl. foot switch and remote controlLoad capacity 5.0 tWorkpiece diameter 303 x 2438 mmFeed speeds infinitely variable 0 - 1745 mm/minWheel diameter 305 mmWheel width 100 mmTotal power requirement 0.5 kWMachine weight approx. 0.37 tDimensions approx. 1.5 x 1.05 x 0.7 m Condition: never used / new (5) Auction-ID: A7-44764-224
Welding turntable with- foot switch- tilting/swivelling motor- speed infinitely adjustable- 250 Ampere welding current transmission - bore in face plate 40mm.Table diameter 550 mmTable load 500 KgSwivel range 135 degreesTilt adjustment: manual/mechanical motorized Speed max. 5 rpm infinitely variableTable load 50 kg. verticalTotal power requirement 0.8 kWMachine weight approx. 245 KgSpace requirement approx. 820 x 730 x 710 m Condition: never used / new (5) Auction-ID: A7-44764-127
Welding helmet with adjustable self-darkening filtersee pictures Condition: never used / new (5) Auction-ID: A7-44764-181
TEKA filter unit filtoo, volume flow 2500 m3/hTotal power requirement 1.1 kWMachine weight approx. 80 kgSpace requirement approx. 0.58x0.58x0.58 m Condition: never used / new (5) Auction-ID: A7-44764-157
Electrode dryersee pictures Auction-ID: A7-44764-195
Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmbottom ribbed for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. - with drawer unit- grid shelf- heavy-duty castors steerableWorn welding accessories not included Table length 2400 mmTable width 1200 mmTable height 850 - 900 mmMachine weight approx. 0.65 tDimensions L x W x H 2.4 x 1.2 x 0.95 m Condition: never used / new (5) Auction-ID: A7-44764-131
100 € 
