Производитель:
(Категория: 108)
weight max. in kg: 1250 kgWorking height minimal: 540 mmWorking height maximum: 1120 mmtable diameter: 800 mmswivelling range: --> 95 Gradmax. torque: 490 Nmtable rotation speed: 2 U/minWorking height from to: 540 - 1120 vertikal mmWorking height from to: 700 - 1280 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 757 kgdimensions of the machine ca.: 1,76 x 1,63 mHydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 800 mmtable load: 2 tswivelling range: --> 95 Gradmax. torque: 1250 Nmtable rotation speed: 2 U/minWorking height from to: 550 - 1300 vertikal mmWorking height from to: 650 - 1400 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 930 kgdimensions of the machine ca.: 1,85 x 1,66 mElectric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Емкость: 5 кгвыдоход: 100 x 75 x 450 ммвыпуск: 0,4 кВтчастоподключенный частоподъемность нагрузки: 220 - 240 Внастройка: 30 - 180 Градвес: 10 кгразмеры: 570 x 200 x 150 м
number: 57 Positionenweight: 98 kgcondition: neu : 28 mmSet 2: 57 pieces, 28mm system, consisting of:Clamps: 6 x 280610.NClamps: 4 x 280630.NPrism: 4 x 280648.1.NBolt: 18 x 160511Magnetic bolt 4 x 280740Stop: 6 x 280410.NStop: 6 x 280420.NAngle: 4 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
количество: 29 Позиционный: 16 ммусловие: neu вес: 11 кгУстановка 1 29 штук, система 16 мм, состоящая из:Зажимы: 4 x 160610Болт: 12 x 160511Стол: 4 x 160420.NAngle: 4 x 160108.NAngle: 4 x 160110.NАксессуарный комплект. 1 x 163999Цена плюс упаковка и транспорт.
table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,38 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,35 tdimensions: 1,2 x 0,8 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Уровень защиты: 9 - 13 МПитание: 2 x CR2032 3Ввес: 460 граммразмеры: 250 x 270 x 230 м
volume capacity: 2500 m3/h0: 3000 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,08 tdimensions of the machine ca.: 0,58x0,58x0,58 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1000 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,1 - 1,25 U/minmax. torque on the faceplate: 900 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,37 + 0,75 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,55 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 850 - 900 mmweight of the machine ca.: 0,45 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.Very sturdy base, so theTable can be moved with a pallet truck.The accessories shown are optional!Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,8 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 55 Positionen: 16 mmcondition: neu weight: 23 kgSet 2 55 pieces, 16mm system, consisting of:Clamps: 6 x 160610Clamps: 2 x 160630Prism: 4 x 160645.1.NBolt: 18 x 160511Stop: 4 x 160410.NStop: 6 x 160420.NAngle: 6 x 160108.NAngle: 6 x 160110.NAngle: 2 x 160162.NAccessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,3 tdimensions: 1,0 x 1,0 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17-19.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,Side walls 150mm with parallel hole arrangement in a 25 mm grid.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.Other dimensions available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Степень защиты: 9 - 13 МПитание: 3 Ввывес: 2 кгразмеры: 300 x 240 x 240 м
Сварочный ток: 10 - 180 А напряжение цепи: Вчастоподключенный частотой нагрузки: 230 Ввес: 6,8 кгРазмеры (ДxШxВ): 403 x 153 x 264 ммАксессуары для сварочного аппарата инертным газом: Входящий пакет 4м, Кабель земли 4 м Аксессуары для аппарата для сварки инертным газом: Пакет 4 м. Кабель заземления 4мСварочная проволока 1 рулон, Волокометр давления Сварочная проволока 1 рулон, Гамер давленияС соплом и газовым сопломСписочная цена: 2200, -EUR
Уровень защиты: 4 - 12 МПитание: 2 x CR2032 вес: 460 Граммразмеры: 250 x 270 x 230 м
Диаметр стола: 450 ммтабливая нагрузка: waagerecht 300 кгтабливая нагрузка: senkrecht 150 кгвыпустимые скорости поворота: 0,2- 2 Ед/минвольтаж: 230 В / 50 Гцвысотная потребляемая мощность: 0,55 кВтвес машины ca.: 80 кгразмеры машины ca.: 0,65 x 0,5 x 1,0 м• неиспользуемая прикладная машина• ручная регулировка наклона• Start-Stop ножным переключателем• с CE
длина стола: 590 ммвыпубликая ширина: 590 ммтабливая нагрузка: 200 кгвыпустительная скорость поворота: 0,23 - 2,3 ЕД/минвысота: 650 ммвыгодная потребляемая мощность: 0,55 кВтвес машины ca.: 600 Kg
с ручным управлением, с воздушным охлаждением Номинальная мощность при 50% ED: 2,4 кВА Ток короткого замыкания: 7,5 кА Усилие электрода макс.: 180daN Проекция: 250 мм --- оснащен: - Соединительный кабель длиной 5 м - Стандартные электродные рычаги 250мм Управление RS15 (опционально) --- Гарантия 6 месяцев --- Обучение + ввод в эксплуатацию по запросу --- Электроды точечной сварки + запасные части на складе
Спецификации: - Сварочный ток 300 A 60% ED - 230 A 100% ED - Сварочный ток регулируется от 10 А до 300 А - Потребляемый ток 400 В / 19,5 А / 10,7 кВА - с: - E.- сварочным кабелем - Кабель заземления - Соединительный кабель - Требования к пространству прибл. Ш 600 x В 900 x Г 1000 мм - Вес прибл. 180 кг
Слоистая намотка сплошной проволоки для сварки под инертным газом во всех положениях. Типы защитных газов: Ar, CO2 / Ar, CO2, O2 / CO2. Сварочный рулон mag проволочный электрод, неиспользованный, оригинальный термоусадочные, обернутые в фольгу, овп в картоне! 15кг 1.2мм Союз производителей Тип A600IG Вероятно для сварки осаждением Доступно несколько. За полную приемку специальная цена! Специальная цена!
Спецификации: - Сварочный ток 315 A 80% ED - 280 A 100% ED - Сварочный ток регулируется от 50 А до 315 А - Потребляемый ток 400 В / 19,5 А / 10,7 кВА - с: - E.- сварочным кабелем - Кабель заземления - Соединительный кабель - Требования к пространству прибл. Ш 600 x В 900 x Г 1000 мм - Вес прибл. 200 кг
Номинальная мощность при 50% ED: 35 кВА Ток короткого замыкания: 19 кА Усилие электрода: 300daN / один ход Проекция: 395 мм --- Управление сваркой: WS 708 (7 раз, 8 программ) --- Включая дополнительные опции: - Ножной переключатель - Опускание верхнего фитинга без давления - Главный переключатель --- Гарантия 6 месяцев --- Обучение + ввод в эксплуатацию по запросу --- Электроды точечной сварки + запасные части на складе
