Fabricante:
(Categoria: 102)
turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWC-Axis: 0,0001 °spindle diameter: 65 mmmilling spindle: milling spindle motor: 23 / 13 kWmilling head speed: 12000 U/minb-axis: +/- 120 °axis stroke:: x-axis: 490 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNnumber of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6 x 3 x 2,3 mCNC turning and milling center - 5 axes simultaneous- CNC control Siemens 840D Ergo Line with ShopTurn- C-axis (0.0001°)- Milling head with B-axis- Y-axis- Coolant device/paper belt filter (through Spindle)- Chip conveyor- Tailstock- SMW A ...
max. turning diameter: 580 mmturning length: 1500 mmcontrol: OSP 7000 L greates pass round over bed: 610 mmswing diameter over slide rest: 580 mmMain spindle:: turning speed range - main spindle: 12 - 2.800 min/-1spindle bearing diameter: 150 mmspindle bore: 110 mmspindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kWC-Axis: 0,001 °axis stroke:: x-axis: 598 mmy-axis: 230 (+110 / -120) mmz-axis: 1.660 mmfeeds:: rapid traverse: X / Y: 12.000 mm/minrapid traverse: Z: 20.000 mm/minrapid traverse: C: 100 min/-1cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/Uturret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos.driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1tool shank height: 25 mmBoring bar shank diameter: 50 mmTailstock:: diameter of quill: 120 mmquill stroke: 170 mmtaper of center: MT 5 tool magazin:: n ...
turning diameter: 16 mmspindle passage: 16 mmturning length: 160 mmcontrol: GE FANUC Series 18 i-T spindle turning speed range: 8000 U/minrapid traverse: 30 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 2,1 tAccessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm), chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 6300 mmswing diameter: 9700 mmturning height: 4900 mmram head dimension: 360 x 360 mmfaceplate turning speed range: 0,4 - 50 U/minworkpiece weight: 150 tmain drive motor: 71 kWControl: Siemens Sinumerik 840D total power requirement: 230 kVAweight of the machine ca.: - tdimensions of the machine ca.: - m2010 overhauled and modernised, new electric etc, equipped with:- Siemens Sinumerik 840D (2 Panels Left/right Side)- C-axis and milling spindle- 2 ram support on cross beam- milling spindle with 1000 rpm, 28kW (right ram)- Turning support (left ram)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter max. over bed cover: 570 mmswing diameter over face slide: 420 mmcontrol: Heidenhain CNC PILOT longitudinal stroke: 635 mmface stroke: 220 spindle bore: 79 mmcentre distance: 1000 mmchucking diameter: 250 mmtailstock taper MT: 4 feed speed longitudal: 0,025-24.000 mm/min.feed speed face: 0,025-20.000 mm/min.power feed longitudinal: 7.000 NFeed Force Face: 3.500 Ntotal power requirement: 44 weight of the machine ca.: 5,7 tdimensions of the machine ca.: 7,5 x 4,0 x 1,7 mAccessories: - 3 clamping jaws - various tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1000 mmmax. torque on the spindle: 900 total power requirement: 17 kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mA vertical turning lathe with a fixed cross railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC Series 31i Model 5 turning diameter: 540 mmturning length: 1040 mmc-axis: indexing: 0.001 °turning speeds: -5000 U/mintool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mmrapid traverse X-axis: 36 / 24 m/minrapid traverse Z-axis: 36 / 26 m/minOverall size: 8000 x 3000 x 3000 mmweight of the machine ca.: 12000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/minspindle: 1 kWgripping station: 42 mmturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders (see picture)5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 4 ...
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...
turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 640 mmswing diameter over face slide: 435 mmcontrol: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/mincentre distance: 1.500 mmspindle bore: 70 mmspindle diameter in front bearing: 100 mmLathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 tiThe machine is in good condition and can be inspected under power at any time.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DUS630ti | DUS 630ti | DUS 630 tiThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 465 mmturning length: 1050 mmcontrol: Heidenhain x-axis: 300 mmtotal power requirement: kWweight of the machine ca.: 7600 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mmturning length: - mmcontrol: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mOn behalf of the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mmturning length: - mmcontrol: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mOn behalf of the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 100 mmturning length: 75 mmcontrol: FANUC Oi-TF total power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1500 mmgreates pass round over bed: 490 mmturning dia. over face-slide: 280 mmcontrol: Heidenhain Manual Plus Speed range - up to: 3000 U/minspindle bore: 65 mmpower capacity - workpiece power: 12/16 (100/60%) kWweight of the machine ca.: 3,5 tEquipment/Accessories:- Steady rest- Chuck- Tool holders- Drill bits- Tips- Multifix holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...
turning diameter: 300 mmturning length: 600 mmcontrol: FANUC, 18i-TB turning diameter over bed slide: 230 mmtravel x1: 165 mmtravel z1: 700 mmtravel x2: 190 mmtravel z2: 720 mmtravel -y axis: +/- 50 mmmain spindle bore: 76 mmmain spindle speed: 5.000 U/minmain spindle drive: 22 kWmax. torque on the spindle: 208 Nmsub spindle bore: 76 mmsub spindle speed: 5.000 U/minsub spindle drive: 22 kWmax. torque on the spindle: 208 Nmtool turret: 2 x 12 Stat.number of driven tool stations: 2 x 12 speed of driven tools: 5.000 U/minmax. torque: 47 Nmwork piece power: 5,5 kWC-axis resolution: 0,001 °rapid traverse x + z axis: 20 / 40 m/minrapid traverse y-axis: 7,5 m/mintotal power requirement: 68,4 kVAAccessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, ...
turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...
faceplate diameter: 850 mmswing diameter: 1200 mmturning height: 1000 mmControl: Siemens type: 840 D Tool changer: 36 Pos.x-travel: 870 mmz-travel: 1020 mm: live tooling: c-axis: 0weight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
