Fabricante:
(Categoria: 102)
turning diameter over bed:240 mmturning length:450 mmtotal power requirement:0,5 kWweight of the machine ca.:120 kgdimensions of the machine ca.:1500 x 600 x 1200 mmcentre height:120 mmspindle bore:21 mmrevolutions per minute: 75 - 2980 U/min
turning diameter:480 mmturning length:1250 mmcontrol:H 645 weight of the machine ca.:8 tdimensions of the machine ca.:5 x 2 x 2 mcentre distance:1580 mmswing over bed:495 mmswing diameter:üb.Querschlitten ca.350 mmworking area:1600 mmcontrol:H645 connected load:50 kW
number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
control: Numeriksteuerung CNC 700 K total power requirement:28 KVAweight of the machine ca.:7,8 tdimensions of the machine ca.:6610 x 2280 x 2235 mmwork height max.:1060 mmgreates pass round over bed:305 mmspindle bore:82 mmDocuments:vorhanden
Article: Programme-controlled automatic latheManufacturer: TraubType: TF60 / 140Yob: 1978Bar automatPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
turning length:630 mmtotal power requirement:16 kWweight of the machine ca.:5 tdimensions of the machine ca.:3400 x 1500 x 1600 mmswing diameter over slide rest:Hinterdrehschlitten 250 mmcentre height:über Hinterdrehschlitten 150 mmcenter height over bed:300 mmturning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mmaccessories::2 Schränke Wechselräder
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DNTYob: 1994Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter D=32mmcontrol: Siemens SIMATIC S7electronic cam control Balluffgripper in position 8 for backworkingCNC cross slide position 6CNC cross slide position 7Workpiece beltCoolant cooling SchimpkeChip conveyor with magnetic separatorTapping couplingsThe tooling shown may differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
turning diameter:500 mmturning length:1000 mmcontrol:MANUAL PLUS Grundig total power requirement:24 kVAweight of the machine ca.:2650 kgdimensions of the machine ca.:2500 x 1750 x 1850 mmswing diameter over face slide:290 mmchuck:Ø max. 260 mmcross movement:260 mmspindle head:DIN 55027 Größe 8 spindle bore diameter:70 mmrapid travel - longitudinal/face:8 /6 m/minspindle speeds::8 - 2800 tailstock travel:180 mmtailstock quill taper MT:5
: neu : Bulgarien : 133520 €: 2523.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turni ...
: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 21.690,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopBUYING USED MACHINER ...
: neu : Bulgarien : 60660 €: 1146.47 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 3 : 16 - 63, 63 - 250, 315 - U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 060 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 57 710,00 turning length1.500 mm € 58 850,00 turning length3.000 mm ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 131720 €: 2489.51 €: 1020 mm: 2000 mm: 510 mm: 358 mm: 770 mm: 560 mm: 361 MK: 12 : 6,3 - 315 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 505 mm: 270 mm: 105 mm: 6 MK: 225 mm: 18,5 kW: 6400 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type D1, system like Mult ...
greates pass round over bed: 640 mmswing diameter over face slide: 435 mmcontrol: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/mincentre distance: 1.500 mmspindle bore: 70 mmspindle diameter in front bearing: 100 mmLathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 tiThe machine is in good condition and can be inspected under power at any time.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DUS630ti | DUS 630ti | DUS 630 tiThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 €: 1 : 330 mm: 1000 mm: 167 mm: 38 mm: 210 mm: 12 : 40 - 2500 1/min: 16 : 0.03 - 1 mm/U: 0.2 - 14 mm: 2 - 56 TPI Gänge/: 190 mm: 92 mm: 42 mm: 3 MK: 110 mm: 2.2 kW: 1940 mm: 1000 mm: 1550 mm: 685 kg3-axis digital read out Newall4-jaw chuck Bison diameter 160mm with inside and outside jawsQuick-change tool post with 1 holdCoolant deviceChuck protectionSteel holder protectionLead screw coverMachine lightManual brakeOperating manual in German with EC declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• R ...
turning diameter: 465 mmturning length: 1050 mmcontrol: Heidenhain x-axis: 300 mmtotal power requirement: kWweight of the machine ca.: 7600 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Mitsubishi Mieldas 635 LC Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Z3 axis 410 mm Max machining diameter Ø 32 mm (from Ø 10 mm) Max machining length 320 mm for chuck Max front hole diameter Ø 12 mm Max front tapping diameter M 10 (male) - M 8 (dies) Spindle through-hole diameter Ø36 mm Main spindle speed from 200 to 8,000 min ̄¹ Main Spindle Speed Change Stepless - S + 4-digit numeric value Tool holder spindle Max tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min ̄¹ - Continuous - S + 4-digit numerical value IEMCA BOSS 332-E BAR CONVEYOR AND BAR LOADER INCLUDED Machinery equipped with manuals and EC declaration of conformity. Well used, seen and liked in the state of fact and law in which it finds itself. All technical data shown are indicative and may be changed without notice and therefore s ...
Includes cabinet with various accessories. Auction-ID: A1-46933-32
Technical data Manufacturer: FMS Drehtechnik Schaffhausen AG, Switzerland Type: NDL-40/130 Machine Type: CNC Lathe Year of Make: 2003 Control: Siemens SINUMERIK Machine No.: 16212-51 Turning length: 1500 mm Turning diameter: 400 mm Swing diameter over bed: 630 mm Swing diameter over face slide: 410 mm Speed range: 40 – 3200 rpm Main drive: 68 kW Spindle bore: 90 mm Hydr. Clamping Cylinder Passage: 86 mm Tailstock: MK5, quill stroke 120 mm Rapid traverse: 16,000 mm/min Coolant tank: 400 l Dimensions (L x W x H): approx. 5350 x 2270 x 2670 mm Machine weight: approx. 14,000 kg Configuration Siemens SINUMERIK CNC control Heidenhain Digital Display Hydraulic clamping system Tool turret Coolant system Chip conveyor Hydraulic power unit Various clamping devices and tool holders Extensive technical documentation available Machine dismantled in the production environment Auction-ID: A7-46939-8 ...
Technical data MEUSER M1 S Lead and Pull Spindle Lathe Year of Make: 1970 Speed range: 20 – 1000 rpm 4-jaw chuck approx. 400 mm Conventional lathe Configuration Tailstock available Bezel available Face Plate / Drive Plate Quick-change steel holder and tool holder Various turning tools and clamping devices Coolant system available Accessories and tool holders according to photo documentation Condition according to photo documentation Auction-ID: A7-46939-104
: neu : Bulgarien : 77840 €: 1471.18 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 63 970,00 turnin ...
: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 47390 €: 905.15 €: 1 : 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS (PRICES ON ...
Maximum Turning Diameter: 390 mm Maximum Turning Length (L Version): 680 mm Self-centering diameter: 250 mm (10\") Bar Passage (Version C): 76 mm Spindle Speed: Up to 3,500 rpm (high torque) Spindle nose mount: A2-8 Total Machine Weight: Approx. 5,200 kg Floor Dimensions (W x D): Approx. 3,350 x 1,700 mm Maximum Height: 1,900 mm Auction-ID: A7-47195-5
turning diameter: - mmturning length: - mmcontrol: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mOn behalf of the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mmturning length: - mmcontrol: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mOn behalf of the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Model: Mori Seiki MT 1500 S (Sub-spindle version) Type: 5-axis multitasking turning/milling center Maximum rotating diameter on the bench: 750 mm Maximum turning diameter: 540 mm Maximum turning length: 800 - 1,000 mm (depending on version) Usable bar passage (main spindle): 65 mm (ASA 6\" standard) Useful bar passage (counter spindle): 52 mm Main Spindle and Sub-Spindle Maximum main spindle speed: 4,500 rpm (revolutions per minute) Main spindle motor power: 22 kW / 18.5 kW (30 min/cont.) Maximum counter spindle speed: 6,000 rpm Counter spindle motor power: 11 kW / 7.5 kW C-axis resolution (both spindles): 0.001 degrees (continuous positioning) Milling Head (B-Axis) and Linear Axes X-axis travel (upper head): 565 mm Y-axis travel (top head): 160 mm (± 80 mm from center) Z-axis travel (upper head): 800 - 1,050 mm B-axis travel (head tilt): ± 120 degrees (total field 240 ...
Spindle diameter 255 mm SMW autoblok 250 BB 12-place motorized turret tailstock and bezel Auction-ID: A7-47195-38
Motorized turret, self-centering collet holder, tailstock, manuals present Auction-ID: A7-47195-32
Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-47195-29
25.000 € 
