Fabricante:
(Categoria: 102)
: neu : Bulgarien : 126650 €: 2393.69 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 7500 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turning length2.000 mm € 115430,00 turning ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113720 €: 2149.31 €: 800 mm: 2000 mm: 400 mm: 315 mm: 560 mm: 560 mm: 318 MK: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6100 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix i ...
turning length: 850 mmturning diameter: 400 mmswing diameter over bed slide: 245 mmspindle bore: 52.0 mmturning speeds: 45 - 1800 U/minbed width: 260 mmspindle taper: DIN 55029 D 1-5taper in tailstock: 3 MKquill travel: 120 mmtotal power requirement: 3.0 / 4.5 kWweight of the machine ca.: 1255 kgrange L-W-H: 1900 x 1000 x 1610 mmEquipment:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-200 mm / D5- Clamping disk 320 mm- Fixed steady rest - passage diameter max. 130 mm- Follow-on steady rest - passage diameter max. 100 mm- Coolant system- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Micrometer longitudinal stop- Slip clutch- Motor with magnetic brake in accordance with CE standard- Initial filling with Shell Tellus 46- Extendable chip tray- LED machine light- Change gears- Reduction sleeve- 2 centering points- Chip rear wall- ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 €: 2623.32 €: 1020 mm: 2000 mm: 510 mm: 358 mm: 770 mm: 560 mm: 361 MK: 12 : 6,3 - 315 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 505 mm: 270 mm: 105 mm: 6 MK: 225 mm: 18.5 kW: 6400 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type D1, system like Mult ...
turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32.0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmspindle taper: DIN 55027 GR 5 total power requirement: 2.2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college ()- in checked condition - machine videos -https://www.youtube.com/watch?v=iqU7Bkh6INohttps://www.youtube.com/wa tch?v=aSViqjk51IkFurnishing:- Robust conventional center lathe- 3-jaw lathe chuck Ø 160 mm, with replacement jaws- NEWALL digital display, front left- MULTIFIX steel holder with 4x inserts- fixed bezel- moving bezel- Movable tailstock- Foot/spindle brake- Machine swing feet- User manual (PDF/NL) all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Turning diameter over support 175 mm- ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 €: 2147.42 €: 800 mm: 2000 mm: 400 mm: 260 mm: 560 mm: 560 mm: 318 MK: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6000 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix i ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 86980 €: 1643.92 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",F ...
turning length: 1500 mmturning diameter: 420 mmswing diameter over bed slide: 255 mmturning dia. in gap: 580 mmspindle bore: 52.0 mmturning speeds: 45 - 1800 U/minbed width: 250 mmspindle taper: DIN 55029 D 1-6taper in tailstock: 4 MKquill travel: 140 mmtotal power requirement: 3.0 / 4.5 kWweight of the machine ca.: 1400 kgrange L-W-H: 2570 x 900 x 1600 mmEquipment:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck DK11-200 mm / D6- Clamping disk 350 mm- Fixed steady rest - passage diameter max. 135 mm- Follow-on steady rest - passage diameter max. 65 mm- Coolant system- Quadruple tool holder- Protective device for quadruple tool holder- Micrometer longitudinal stop- Slip clutch- Turret stop with fine adjustment- Thread gauge- Motor with magnetic brake according to CE standard- Foot pedal with brake function according to CE- Initial filling with Shell Tellus 46- LED machine l ...
turning diameter: mmswing diameter: mmturning height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: mmspindle passage: 23 mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 215 mmreus: 30 - 3000 U/minspindle bore: 38 mmfeed: längs 0,043 - 0,653 m/mintotal power requirement: 3,5 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: 1900 x 900 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mmswing diameter: mmturning height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 340 mmturning diameter over slide rest: 260 mmturning length: 700 mmspindle bore: 48 mmspindle turning speed range: 25 - 2000 U/minspindle nose: DIN 55027 KK 5voltage: 380 Volttotal power requirement: 2,2/4,4 kWweight of the machine ca.: 1000 kg.dimensions of the machine ca.: 1.800 x 700 x 1.500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usava
turning diameter over bed: 1740 mmturning diameter over slide rest: 1300 mmturning length: 16000 mmturning speeds: 4-180 U/minRapid travel: chip conveyor: digital readout: steady: total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mmturning diameter over slide rest: 245 mmturning length: 800 mmtotal power requirement: 4.5 kWweight of the machine ca.: 1.25 trequired space: 1.96x1.69x1.06 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 3.200 mmturning diameter: modified: 2.400 mmturning diameter over slide: 3.000 mmturning length: max. 15.000 mmcontrol: Sinumerik 840 D Siemensworkpiece weight: max. 80.000 kgwork accuracy: (up to) 0,01 mmMain spindle:: turning speed range - main spindle: max. 50 min/-1total power requirement: - kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 mDocuments: Heavy Duty LatheZERBST - DXP 5 / W15x15000- measurement precision: < 0,01 mmRetrofit 2009 / 2012:- 2009: Control system upgrade to Sinumerik 840D- 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technologyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 t- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 760 mmturning length: 3000 mmswing diameter over bed slide: 520 mmcentre height: 380 mmreus: 17 (7,5 - 1015) U/mintail stock: MK6 quill stroke: 225 mmdiameter of quill: 105 mmspindle bore: 132 mmfeed: längs 0,039 - 18 mm/minfeed: quer 0,02 - 9 mm/mintotal power requirement: 15 kWweight of the machine ca.: 4700 kgdimensions of the machine ca.: 4900 x 1650 x 1650 mm- Coolant device- Machine light- Chip back wall- Spindle protection- Lathe chuck protection- Tool holder protection- Interchangeable gearsSpecial equipment- 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type B, including 4 tool holders- 3-axis digital display DRO Newall- Foot pedal with brake function CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 720 mmturning length: 2250 mmcontrol: CNCN 300 turning diameter over bed slide: 480 mm3-jaw-chuck diameter: 650 mmtotal power requirement: 44 kWweight of the machine ca.: tdimensions of the machine ca.: mVoltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: / mmturning length: / mmworkpiece length: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 800 mmturning diameter over slide rest: 530 mmturning length: 8000 mmturning dia. in gap: 1080 mmspindle diameter: 95 mmspeed: 8-800 (21x) U/mintotal power requirement: 15/22 kWweight of the machine ca.: tdimensions of the machine ca.: m4-Jaw chuck3-Jaw chuck2x Steady Rest4-Way toolpostThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 450 mmturning length: 1500 mmcentre height: 225 mmSwing diameter: 450 mmTurning length: 1,500 mmCentre height: 225 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 €: 1 : 22600 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgThis machine is used in our workshop for repair work,therefore it has only been used very little so far.(New price € 37,910.00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guard ...
faceplate diameter: 1800 mmturning height: 1600 mmturning diameter over bed: 2150 mmturning speeds: 3,15 - 250 U/minvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: 370 - 800 mmweight of the machine ca.: 650 kgdimensions of the machine ca.: 20,41,3 mOpen steady rest / setting block - fixed with 4 quillsBed width approx. 360 mmTotal base width approx. 720 mmCentre height approx. 500 mmSpace requirement approx. 1950 x 400 x 1300 mmWeight approx. 650 kgWorking range: approx. Ø 370 - 800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 475 mmturning length: 830 mmcontrol: HEIDENHAIN MANUALplus 620swing diameter over slide rest: 260 mmcentre distance: 1000 mmspindle bore: 70 mmspindle turning speed range: 1 - 3000 U/minfeeds - cross: 0,001 - 1000 mm/Ufeeds - longitudinal: 0,001 - 2000 mm/Urapid travel - longitudinal/face: 10 / 5 m/mintailstock quill diameter: 70 mmtailstock quill stroke: 120 mmtailstock quill taper MT: 5 main drive: (40 % ED) 25 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: m Control HEIDENHAIN MANUALplus 620 DXF conversion software (processing of contours in DXF format from CAD drawings) Ethernet and USB interfaces inside the control cabinet Coolant system (frequency-controlled), 1–4 bar Glass scale for direct position measurement on the X and Z axes 4-position PARAT quick-change tool holder, size 2, with several inserts 3-jaw-chuck RÖHM ZS 200 Roller guide for ...
turning diameter: 190 mmturning length: 190 mmcontrol: BOSCH CC 200 total power requirement: 12 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2 (9 ) x 1,5 x 1,8 mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
