máquinas injetoras usadas para venda (859)

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for high rigidity and precision Platen Area: Large platen  ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive Concept: Hybrid Zeres system combining electric p ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and compact footprint Hydraulics: Energy-saving hydraulic  ...

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for high rigidity and space efficiency Energy Efficie ...

Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footprint and high stability Energy Efficiency: Servo-hy ...

Injection Unit Screw Diameter: Ø 70 Injection Volume: 1,239 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 4,500 kN (450 t) Clamping System: Two-platen design (Jupiter II series) Platen Size (H × V): approx. 1,140 × 1,040 mm Mould Opening Stroke: 950 mm Max. Daylight Opening: approx. 1,650 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 100 / 70 kN Drive & Control Drive Type: Servo-hydraulic system Main Motor Power: 62 kW Full Load Current: 104 A Short Circuit Rating: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Haitian KEBA touchscreen control Equipment / Features Clamping Concept: Two-platen system for space efficiency and high rigidity Energy Efficiency: Servo-hydraulic driv ...

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1

Control Type: SelogicaClosing System: HydraulicTECHNICAL DATAClosing Force: 1500 kNClearance between Tie Bars: 470 mm x 470 mmPlatelet Dimensions: 650 mm x 650 mmMold Size: Min 250 mmMaximum Opening Stroke: 500 mmMaximum Distance Between Platens: 750 mmScrew Diameter: 45 mmShot Volume / Shot Weight: 230 ccm / 210 grams PSInjection Pressure: 1670 barGENERAL DATAMotor: 37 kWHeaters: 10.2 kWOperating Hours: To be verifiedEQUIPMENTLanguage: GermanHydraulic core: x1Air valve: YesService booklet: YesAdditional equipment: Robot access Auction-ID: A7-45917-2

Control Type: SelogicaClosing System: HydraulicTECHNICAL DATAClosing Force: 1500 kNClearance between Tie Bars: 470 mm x 470 mmPlatelet Dimensions: 650 mm x 650 mmMold Size: Min 250 mmMaximum Opening Stroke: 500 mmMaximum Distance Between Platens: 750 mmScrew Diameter: 45 mmShot Volume / Shot Weight: 230 ccm / 210 grams PSInjection Pressure: 1670 barGENERAL DATAMotor: 37 kWHeaters: 10.2 kWOperating Hours: To be verifiedEQUIPMENTLanguage: GermanHydraulic core: x1Air valve: YesService booklet: YesAdditional equipment: Robot access Auction-ID: A7-45917-3

Control Type: MC 4Closing System: HydraulicTECHNICAL DATAClosing Force: 1100 kNClearance between Tie Bars: 470 mm x 470 mmPlatelet Dimensions: 745 mm x 770 mmMold Size: Min 300 mmMaximum Opening Stroke: 600 mmMaximum Distance Between Platens: 900 mmScrew Diameter: 40 mmShot Volume / Shot Weight: 217 ccm / 198 grams PSInjection Pressure: 2377 barGENERAL DATAMotor: 18.5 kWHeaters: 13 kWOperating Hours: To be verifiedEQUIPMENTLanguage: GermanHydraulic core: x1Air valve: YesService booklet: YesAdditional equipment: Robot input, Battery(nitrogen cylinder) Auction-ID: A7-45917-5

Control Type: SelogicaClosing System: HydraulicTECHNICAL DATAClosing Force: 600 kNClearance between Tie Bars: 370 mm x 370 mmPlatelet Dimensions: 570 mm x 570 mmMold Size: Min 250 mmMaximum Opening Stroke: 500 mmMaximum Distance Between Platens: 750 mmScrew Diameter: 40 mmShot Volume / Shot Weight: 188 ccm / 172 grams PSInjection Pressure: 1390 barGENERAL DATAMotor: 15 kWHeaters: 5.5 kWOperating Hours: To be verifiedEQUIPMENTLanguage: GermanHydraulic core: x1Service book: Yes Auction-ID: A7-45917-1

Control type: Unilog B4Closing system: KnobTECHNICAL DATAClosing force: 50 kNMaximum mold size: 196 mm x 156 mmPlate dimensions: 196 mm x 364 mmMold size: min. 100 mmMaximum opening stroke: 200 mmMaximum plate spacing: 300 mmScrew diameter: 14 mmInjection volume / Shot weight: 1.1 ccm / 1 gram PSInjection pressure: 2500 barGENERAL DATAMotor: 2 kWEQUIPMENTLanguage: GermanHydraulic core: -Air valve: x1Service booklet: YesAdditional equipment: See belowAdditional equipment: Rotary table, Robot integrated with the machine, Fully electric injection molding machine, Quality monitoring module, Cleanroom module, Mold pressure control, Quiet machine operation, Additional 14 mm screw Auction-ID: A7-45917-4

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.

Key data: 6500 kN, 105 mm

Localização é : América Latina

Key data: 20000 kN

Angebot/Oferta: Engel Duo 17060/2000 Robô Viper 60 aprox. 4900h Ano 2021

Key data: 4000 kN, 80 mm

Máquina + Robô Viper 12

Key data: 5000 kN

Oferta(4x): Engel Duo 1800/500 BJ./ANO 2016 38500h

Key data: 7000 kN, 40 mm

Engel E-DUO 740H/740L/700 combinado BJ./ANO 2017 aprox. 3871 hrs/h Visão geral da máquina: Força de fixação: 7000 kN Diâmetro do parafuso: 40 mm Velocidade do parafuso: 300 rpm Curso de dosagem: 200 mm Controlo: Engel CC300 Peso: 22 toneladas Horário: 3871 horas Caraterísticas: Gira-discos elétrico de 6 estações Ajuste elétrico rápido para o curso da placa da máquina Duas unidades de injeção, cada uma com parafuso de 3 zonas (D45 mm) 32 zonas para controlo de corredores quentes Unidades elétricas de plastificação Documentação completa incluída Estado: Pronto a utilizar (utilizado) Horário: 3871 Estado da máquina: Já desmontada Defeitos ou peças em falta: Sem defeitos conhecidos, com manutenção regular Documentação técnica: Completa e disponível (pode ser consultada no local)

Key data: 20000 kN, 135 mm

Dosagem 1: Plastificar 1: Diâmetro do parafuso mm 135 Diâmetro do parafuso mm 120 | Artigo 135.º | 150 Curso de dosagem Curso de parafuso mm 610 Capacidade máxima de injeção cm3 6899 | 8731 | 10780 Velocidade do parafuso min-1 125 Torque de minhoca Torque de parafuso Nm 14000 Velocidade máxima do parafuso torque reduzido min-1 135 Velocidade máxima do parafuso de binário reduzido Nm 12963 Velocidade de parafuso reduzida, torque máximo do parafuso, min-1 112 Torque máximo do parafuso velocidade do parafuso reduzida Nm 15630 Desempenho de plastificação (3 zonas) 1.2 Taxa de recuperação (parafuso de 3 zonas) 1,2 g/s 165 | 222,9 | 231,3 Desempenho de plastificação (barreira) 3 Taxa de recuperação (parafuso de barreira) 3 g/s 208,3 | 279,2 | 264,6 1) Valores para poliestireno até a unidade de injeção 2550 de acordo com ETR 10100 1) Dados para GPPS até a un ...

Key data: 4200 kN

Máquina em produção !1

Máquina de moldagem de injeção de anjo velha

máquina em stock !

com parafuso suplente, mangueira de alta pressão e várias peças sobressalentes - ver imagens

várias peças sobressalentes incl.

2 - Máquina K

Para venda máquina de compressão rotativa CCM032, produzida em SACMI (Itália). Condição perfeita com sistema de vídeo de controlo.