máquinas injetoras usadas para venda (862)

Key data: 3200 mm, 287 , 50

Diâmetro do parafuso: 50 mmPeso de injeção no poliestireno: 287 gForça de aperto: 3200 kNDiâmetro do parafuso: 35 ou 50 mmVolume de curso: 141/314 cm³ Peso de injeção no poliestireno: 154 / 287 g/hpPressão de injeção: 2.500/1280 barForça de aperto: 320 tLuzes Espaçamento das barras de ligação H x V: 720 x 720 mmAltura de instalação da ferramenta - mínimo: 300 mmCurso de abertura: 600 mmCentralização: 100/100 mmControlo do microprocessador: Selogica direct Texto do ecrã: alemão Instruções de operação: Interface alemãFHK para robôs: Euromap 67 Puxão de núcleo: 2 x Sem tolva de material / Sem bateria de água: -/- máquinade moldagem por injeção totalmente elétrica Peso total: 14.500 kgTamanho total: 6,5 x 2,1 x 2,2 mCondições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Key data: 2500 mm, 521 , 55

Diâmetro do parafuso: 55 mmPeso de injeção em poliestireno: 521 gForça de aperto: 2500 kNDiâmetro do parafuso: 55 mmVolume de curso: 570 cm³ Peso de injeção em poliestireno: 521 g/hpPressão de injeção: 2.470 barForça de fixação: 250 tLuzes Espaçamento das barras de ligação H x V: 630 x 630 mmAltura de instalação da ferramenta - mínimo: 300 mmDistância de abertura: 550 mmControlo do microprocessador: Selogica direct Texto do ecrã: alemão Manual de instruções: alemão Interface FHK para robôs: Euromap 67 Puxão de núcleo: 1 x Sem tolva de material / Sem bateria de água: -/- máquinade moldagem por injeção totalmente elétrica Peso total: 14.500 kgTamanho total: 6,7 x 2,1 x 2,3 mCondições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Key data: 3500 mm, 810 , 60

Diâmetro do parafuso: 60 mmPeso de injeção em poliestireno: 810 gForça de aperto: 3500 kNDiâmetro do parafuso: 60 mmCurso de curso: 891 cm³ Peso de injeção em poliestireno: 810 g/hpPressão de injeção: 2.420 barForça de aperto: 350 tLâmpadas Espaçamento das barras de ligação H x V: 720 x 720 mmAltura de instalação da ferramenta - min.: 350 mmDistância de abertura: 730 mmControlo do microprocessador: NC5 Texto do ecrã: alemão Instruções de operação: Interface alemã FHK para robôs: Euromap 67 Tração do núcleo: 2 x Sem tolva de material / Sem bateria de água: -/- Potência do acionamento da bomba: 55 kWCarga total ligada: 78,1 kWPeso total: 17.300 kgTamanho total: 7,4 x 2,0 x 2,4 mCondições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Key data: 4200 mm, 1090 , 70

Diâmetro do parafuso: 70 mmPeso de injeção em poliestireno: 1090 gForça de fixação: 4200 kNDiâmetro do parafuso: 70 mmCurso de curso: 1212 cm³ Peso de injeção em poliestireno: 1090 g/hpPressão de injeção: 1.877 barForça de aperto: 420 tLuzes Espaçamento das barras de ligação H x V: 810 x 710 mmAltura de instalação da ferramenta - mínimo: 380 mmDistância de abertura: 710 mmControlo do microprocessador: NC4 Texto do ecrã: alemão Instruções de funcionamento: Interface alemã FHK para robôs: Euromap 67 Puxão do núcleo: 2 x Sem tolva de material / Sem bateria de água: -/- Potência da propulsão da bomba: 45 kWCarga total conectada: 82,4 kWPeso total: 20.000 kgTamanho total: 7,9 x 2,3 x 2,5 mCondições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Engel Victory 1350/220 Tech. 2005 holmenlos 1 correia transportadora; 1 movimento principal Engel ES 500 H 200V / 110 HL - 2 F BJ 2001 holmenlos 2 agregados ; 2 Movimentos principais Engel Victory 500 / 120 Plus 2004 empate sem controlo de barra he / usp ; 1 movimento principal

Arburg 570C2000-800 AF 2006 Golden Edition, guincho de 1 núcleo, 1 correia transportadora 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 Ano fiscal 2005 Sem funcionalidades principais; 1 correia transportadora

Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.

1 Robô de remoção Geiger LR 16 Ano de fabrico 2004 Corridas: x=500 y=1000 z=2600 mm + 2 Robôs de remoção Geiger MidiLiner 3.0 Ano de construção: 2016 Viagens: Eixo X: 300 mm, Eixo Y: 800 mm, Eixo Z: 1300 mm Os robôs de remoção estão em bom estado e imediatamente disponíveis!

This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.

This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine.

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information.

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.