Fabricante:
(Categoria: 706)
O sistema etiqueta com dois módulos usando o processo de cola húmida e pode marcar com cola quente através de um terceiro módulo adicional. Dimensões: aprox. 3,80 m x 3,00 m A etiquetadora atinge uma produção de até 15.000 garrafas por hora. Estado: em funcionamento, totalmente funcional Dimensões da máquina (LxW): 3800 x 3000 mm Potência: até 15.000 bpm Visualização por arranjo
Linha de engarrafamento, composta por: 1. Despaletizador/Despaletizador Fabricante: Pack und Palettiertechnik Rudolf Steinle Gersthofen GmbH Tipo: RAPID-EK Ano de Fabricação: 1993 Pressão do ar: 6 bar Ligação: 220/380 V, 50 Hz Controlo: 24 V CC 2. Desempacotador Fabricante: Radenska & Steinle (RS) Tipo: ARO-P3 Ano de Fabricação: 1995 Pressão do ar: 6 bar Ligação: 380 V, 50 Hz Potência: 3 kW 3. Máquina de lavar caixas Fabricante: Radenska & Steinle (RS) Tipo: SPN-2S Ano de Fabricação: 1995 Ligação: 380 V, 50 Hz Potência: 8 kW 4. Máquina de lavar garrafas Fabricante: Schymanski GmbH (MAG) Tipo: SIRIO 8-24 Ano de construção 2000 Ligação: 400 V, 50 Hz 5. Inspetor de garrafas Fabricante: miho Inspektionsysteme GmbH Tipo: DAVID Ano de Fabricação: 2002 Ligação: 230 V, 50-60 Hz 6. Linha de enchimento de garrafas E ...
O Krones VarioFlash B é um pastador flash altamente eficiente para tratamento térmico de produtos. Foi especialmente desenvolvido para o recheio microbiologicamente seguro de cerveja, bebidas mistas de cerveja, vinho e spritzers Gama de desempenho: Toda a família cobre entre 1.800 e 60.000 litros por hora. A variante pequena apresentada em 2019 está precisamente otimizada para a gama de produção de 18 a 45 hectolitros por hora (1.800 a 4.500 l/h). Design compacto: Toda a central KZE da variante pequena é dimensionada de forma a caber num único recipiente. Isto facilita muito o transporte, instalação e comissionamento no local. Preservação suave: Equipada com um sistema de controlo deslizante de PE (Unidades de Pasteurização) e um circuito de água quente adaptado, a cerveja é aquecida de forma extremamente suave (Unidade de Pasteurização InchExpress) ...
Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Manufacturer (line builder): Leifeld & Lemke Year of manufacture: 1990 (continuously upgraded since) Machine type: complete automatic KEG cleaning and filling line Capacity: up to 130 kegs/h at 30 L (seller-stated) Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery Empty-keg infeed with ce ...
Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data Year of manufacture: 2009 Design: low-level infeed palletizer Changeover: automatic, for different pallet patterns and pallet sizes Output range: low to medium production capacities Handled at the site: shrink-wrapped PET bottle packs Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery GEA Procomac ...
Homogeniser for oat milk, Additional title: High pressure pump , Performance: 5500 l/h, Max. pressure: 200 bar, Power: 45 kW, Length: 1050 mm, Width: 1600 mm, Height: 1400 mm, Weight: 2500 kg
Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Manufacturer: Gernep Model: Soluta 6-720 2SK SD Year of manufacture: 2023 Machine typ ...
Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles.Technical DataCapacity: 14,400 bottles/hour for 0.5 L bottlesProducts: Still and carbonated waterContainers: PET bottlesBottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L, currently running 0.5 L bottlesLabelling: PE Roll-LineCap feeding system: Gravity 26Pack formats: Packs of 12 for 0.5 L and 1.0 L bottles Packs of 24 for 0.5 L bottles Packs of 6 for 1.5 L bottlesPallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mmCondition: Used lineVideo: youtu.be/XUEY0L49VJQMachines and Equipment1. PET blow moulding machine – Sidel SBO 8, year 2006Including preform tipper, preform hopper, elevator, orienter and feed chute2. Air conveyor – Lanfranchi, year 20063. Chiller – MTA, year 20264. Filling machine – SACMI Blu Star ...
Os blocos de enchimento da CIMEC Itália consistem em lavador, enchimento e tampo. Saída de 1000 garrafas por hora. Carregamento e dispensação manual na placa de recolha
Oferecemos vários acessórios em aço inoxidável provenientes de uma dissolução de cervejeira
Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible.
Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h
The APV Puma 2.2.9 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor). Diameter of the impellor: 191 mm (7,5). Pump casing: 9. Connections on the inlet: 2. Connections on the outlet: 2. Capacity with the current motor: ± 35 m3/h at a differential pressure of ± 2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1656, Diameter of the impellor: 191 mm, Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor), Current estimated capacity: ± 35 m3/h at a differential pressure of ± 2 Bar
Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible.
Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible.
Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.
LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottlesIDENTIFICATION- Manufacturer: LEIBINGER- Model: TRANSVASA 12/6 EK- Year of manufacture: 2017- Serial/order number: 472447- Previous application: ciderFUNCTION AND OUTPUT- 12 emptying valves- Counter-pressure emptying with long-tube technology- 6 decapping stations- Direction of operation: clockwise- Nominal output: 2,500 bottles/h for 0.75 l bottles- Adjustable range: 560–2,800 bottles/h- Designed for carbonated beverages, e.g. traditionally produced cider- Automatic removal and collection of pierced bottle closures- Integrated through conveyorPRODUCT AND UTILITY DATA- Maximum product temperature: 20 °C- Compressed air: 6 bar, connection R 1/2- CO? product pressure: 8 bar, gas connection R 1/2- Product outlet: DN 40- Gas discharge: DN 40- Buffer tank: 1 ...
Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQs warehouse in Germany from early September 2026. Technical data Manufacturer: Grone ...
Enxaguador Triblock 32 + 32 de enchimento + 8 tampas de rosca de plástico Adequado para bebidas não gaseificadas em PET
Divisor de recipientes adequado para PET e caixas
Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...
ITEM N.º: Velo-400-20-MC - Utilizou filtro de levedura com 19 placas filtrantes para selar a borda, comprimento total de aproximadamente 2 300mm - Área total do filtro: 5,3m² e teor total de borras: 66 litros. - com novos panos de filtro monofilamento (n.º 1001.6439) - com bomba de diafragma 1 800 litros/hora. - com bandeja de gotejamento - Com nova bomba hidráulica manual - Interruptor de pressão, ligação de ar comprimido, válvula de segurança - Rosca vinho, conforme desejado - Garantia funcional de 1 ano
Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Free air delivery: 2,100 m³/h (35 m³/min) Operating pressure: 40 bar Design pressure (PS): 42 bar Speed: 480 rpm Shaft absorbed power: 355 kW Voltage: 400 V Year of manufacture: 2003 Application: PET bottle blowing Scope of delivery 1 × High-pressure compressor 40 bar CE68 ASG 1 × Refrigeration dryer 1 × Electrical control cabinet Condition Still installed and electrically connected Available for inspection on site Availability Immediately available.
Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machines controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12 touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data Manufacturer: Ortmann + Herbst Model: Hansa B 100/20 Year of manufacture: 1994, completely refurbished 2013 Machine type: rotary filler with screw capper, ...
Características: Volume 3150 L Material nº V2A Sobrepressão máxima de funcionamento 0,99 bar Altura total 3000 mm Diâmetro 1300 mm Diâmetro exterior 1400 mm Superfície dentro de 2B=Terra IIIC Superfície fora de 2B=Terra IIIC Temperatura de trabalho 20 ºC Comprimento do cilindro 2000 mm Descrição: Terra superficial: Fundo do badalo Bocal roscado DN40 central Bocal roscado do lado DN40 Válvula de retenção Cilindro: Tampa de esgoto oval 440 x 340 Sample tap DN15 Ganchos de escada Linha CIP inclinada para baixo DN40 com válvula de disco e manómetro Bocal de soldadura roscado DN25 com válvula de disco Serpentina de arrefecimento com entrada e saída de 3/4 de polegada Tampa Blind Flange Neck DN125 Parte inferior: Parte inferior do batás/ costas curvas tubo de drenagem residual puxado para a frente com válvula de ...
Características: Volume 2750 L Material nº V2A Sobrepressão máxima de funcionamento 2 bar Altura total 2850 mm Diâmetro 1540 mm Diâmetro exterior 1550 mm Superfície dentro de 2B=Terra IIIC Superfície exterior de vidro jateada Descrição: Terra superficial: Parte inferior do batás/ costas curvas Diâmetro da tampa da flange 450 mm Tubo de transbordo de ligação DN40 de saída lateral Bocal de soldadura rosqueado DN65 com válvula de disco Bocal de Soldadura Rosqueado DN65 2 x Soquetes Soldados Roscados DN25 Cilindro: Ganchos de escada cabo CIP puxado para baixo DN40 4 bobinas de arrefecimento com 70 mm de largura Sensor de temperatura Fischer Soquete soldado DN15 Parte inferior: Base cónica com jaqueta de arrefecimento de 35cm de altura Bocal de soldadura roscado lateral DN32 Pés de perfil 3 com calotes - altura ...
Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Manufacturer: M+F KEG-Technik Model: MICROMAT M 1/1-F KeyKeg Year of manufacture: 2011 Machine type: semi-automatic KeyKEG filling machine Capacity: 50-60 KeyKegs per hour Container formats: 20 l and 30 l KeyKEG Fitting type: KeyKEG fitting Connection voltage: 230/400 V, 50 Hz Equipment EC Declaration of Conformity (Machinery Directive 2006/42/EC) Technical documentation Condition Used. The machine has already been disman ...
Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: TF350 Year of manufacture: 2009 Machine type: tray packer for PET bottles Output: 45 - 50 packs/min Adhesive system: Nordson ProBlue 4 hot-melt unit Packaging material: flat cardboard blanks Guarding: full safety enc ...
Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Contrary to the pictures and videos, please note that the tray forming unit is no longer available. This unit has been removed and is no longer installed in the machine/line. Technical data Manufacturer: SMI (Italy) M ...
