fresadoras usadas para venda (2,451)

Fresadora de ferramentas Pera 1FC4 Fabricante: PEAR Modelo: 1FC4 Eixo X (longitudinal): 200 mm Eixo Y (transversal): 300 mm Eixo Z (vertical): 155 mm Relação: 1:1 Dimensões da mesa (mm x mm): 600x400 Comprimento x largura x altura: 1300 × 1300 × 2300 mm Diâmetro da pinça mm: 4,6,8,10,12 Velocidade do eixo: até 12.000 rpm Distância entre mesa e mandrel: 530 mm Motor HP: 0.75 RPM: 700-4400 Peso: aprox. 1800 kg Mais artigos - novos e usados - podem ser encontrados na nossa loja! Custos de envio internacional sob consulta!

Key data: 8000 mm, 1300 mm, 2200 mm

1 nova fresadora de coluna móvel CNC Marca: Soraluce Modelo: FL 8000 Ano de fabrico: 2014/15 Horas de fuso: 3242 Horário: 4261 Controle: Siemens 840 D Solution Line Dados técnicos: Distâncias de viagem X-Y-Z: 8000 x 1300 x 1800 mm Eixo C de viagem: 360 graus Área de fixação da placa: 6000 x 2000 mm Suporte para ferramentas: SK 50 Capto C8 Faixa de velocidade até: 4000 rpm. Unidade principal: 43 kw. Percurso rápido: 35 m/min. Mesa rotativa CNC: 1600 mm 250 rpm Peso aprox.; 40 até. Equipamentos / Acessórios: Revista da ferramenta: Cabeça de fresagem universal controlada Transportador Caixa completa  ...

A partir de uma reciclagem atual, oferecemos-lhe uma pequena fresadora ServoMill 700 da KNUTH. Ano de Marca: 2021 Estado: usado, mas bom Preço original: 32.600,00 EUR Equipamento / acessórios / outras informações: Tabela 1370x300mm x/y/z 680x365x370mm Máquina clássica para aplicações simples ou para formação de formandos. Venda à saída da localização sem garantia, sujeita a venda prévia.

Esta oferta destina-se exclusivamente a empresários na aceção do § 14 do BGB. O preço é líquido acrescido de 19% de IVA. Fabricante: Emerson Macchine Torino Tipo: Carrera 700 Ano de Marca: 2021 Especificações: Tamanho da mesa: 1.320 x 320 mm • Curso X - Y: 1.000 x 290 mm • Curso da mesa Z: 400 mm • Distância do eixo: 140 - 540 mm • Distância do eixo à coluna: 200 - 550 mm • Curso do eixo: 120 mm • Contenção do eixo: ISO 40 • Capacidade de perfuração: 30 mm • Capacidade de torneira: M 16 • Velocidade do eixo vertical: 90 - 2.000 rpm • Velocidade do eixo horizontal: 40 - 1.350 rpm • Potência do motor horizontal/vertical: 2,2/1,5 kW • Dimensões: 1.920 x 1.850 x 2.200 mm • Peso: 1.900 kg Equipamento standard: • Aparafusadora automática •Transmissão • Fuso horizontal • Alimentação automática nos eixos • D ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmClamping System DIN ISO 7388-3-A, ADSpindle taper SK40Speed range - 20000 rpmNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

GeneralVertical Machining centre; Control: CELOS X with HEIDENHAIN TNC7 CharacteristicsTable surface1400 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z42/42/42 m/minMotor spindle speedMASTER® 20.000 rpmMotor spindle speedMASTER® 20.000 rpm AC main drive: 35/25 kW (40/100% ED) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Air Coolant Internal (through spindle centre) switchable via M-FunctionAir Coolant Internal (through spindle centre) switchable via M-Function

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 75 mm-Type: unknown-Hole: Ø 24 mm-26 teeth: belt width 32 mm-Quantity: 5x timing belt pulley available-Price: per piece-Dimensions: Ø 75 x 53 mm-Weight: 0.3 kg/pcs

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 150 mm-Type: unknown-Mounting: Ø 55 mm-35 teeth: belt width 25 mm-Division: see photos-Quantity: 1x timing belt pulley available-Dimensions: Ø 150 x 45 mm-Weight: 3.4 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 75 mm-Type: unknown-Hole: Ø 25 mm-26 teeth: belt width 32 mm-Quantity: 4x timing belt pulley available-Price: per piece-Dimensions: Ø 75 x 50 mm-Weight: 0.3 kg/pcs

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power ...

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtool taper: SK40 Speed: 40-2000 U/min.control: Aktiv HEIDENHAIN table-size: 600 x 210 mmtotal power requirement: 2 kWweight of the machine ca.: 0,73 tdimensions of the machine ca.: TBH 1200x1100x1600 m- Active feed in the X and Z axes- Additional swiveling table 600 x 210 mm- Coolant system- Counter bearing for horizontal milling- Several fixtures and clamping devices/milling cutters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtool taper: SK40 Speed: 40-2000 U/min.control: Aktiv HEIDENHAIN table-size: 600 x 210 mmtotal power requirement: 2 kWweight of the machine ca.: 0,73 tdimensions of the machine ca.: TBH 1200x1100x1600 m- Active feed in the X and Z axes- Additional swiveling table 600 x 210 mm- Coolant system- Counter bearing for horizontal milling- Several fixtures and clamping devices/milling cutters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power ...

Key data: 400 mm, 375 mm, 250 mm

Fresadora simultânea de 5 eixos convertida com mesa rotativa CNC Howimat Máquina de treinamento muito bom estado (pouco usado) Painel de controle giratório com controle PHILIPS CNC 432 Curso X-Y-Z 400x375x250 milímetro Superfície de fixação 300x219 mm Número de ranhuras de guia 1 Porta-ferramentas ISO 40 Curso Quill do eixo de trabalho vertical 50 mm Força de fixação da braçadeira da ferramenta ISO tipo B Velocidades do eixo de trabalho 80-4000 rpm Alimentação 0.1-1500 mm/min Travessia rápida 2,5 m/min Acionamento do eixo 2,2 kW Armário de controle elétrico fixado à máquina Cabine de proteção contra salpicos como caixa de mesa com 3 portas dobráveis (acopladas) Sistema de lubrificação central Sistema de lubrificante de arrefecimento Tensão 220/380 V Frequência 50/60 Hz Ligação total 11 kVA Dimensões da máquina (sem massa de remoção)  ...

Fresadora de 7 eixos Bumotec S192 – com transportador de cavacos LNS totalmente automático e bomba de lama integrada Radiador de óleo Arrefecedor de eixos Eixo de fresagem 30000 rotações/min. Breuning Carregador de barras curtas Elbaron Sucção Inclui 2 suportes rotativos e 3 suportes de broca com adaptador HSK 40A Inclui 2 collets Contra eixo pode ser usado com 2 mandril de mandíbula ou pinça E173

Fraese Fritz Werner TC800BJ 1984

Fresadora universal de ferramentas DECKEL FP 1 Com display digital ativo de 3 eixos Heidenhain TNC 123 Ano de Marca: 1994 Viagens: X 300 Y 160 Z 340 Faixa de velocidade: 40 – 2000 rpm Com os seguintes acessórios: Mesa angular rígida 600 mm x 250 mm superfície de fixação Cabeça de fresagem vertical deslizante Furadeira extensível Alimentação contínua através de potenciómetro 1 pc. vise máquina 1 pc. suporte de balcão com rolamento de contador 1 pc. fresagem mandril longo 0 22 mm, 0 16 mm, 0 27 mm Vários porta-ferramentas S 22 x 2 Eixo Z do fole 1 proteção de cavacos Luz da máquina Bomba de lubrificação central automática Configuração do líquido de arrefecimento Instruções de utilização A MÁQUINA ESTÁ EM PERFEITAS CONDIÇÕES! A MÁQUINA VEM DE UMA OFICINA DE TREINAMENTO!

Em anexo estão algumas fotos do nosso Maho MH-C 800, que gostaríamos de vender. A máquina passou por um retrofit em 2015. A máquina está conectada à rede e pode ser visualizada.

Globoid gear, indexing, oscillator indexer, index gear, rotary index drive-Manufacturer: CAMCO, index gear-Type: MSHV40A917-Y7A-Overload clutch: 11FC-SD-Shaft: Ø 55x45 / 35x80 / 35x75 mm-Translation: 20 rev. = 90°-Dimensions: 815/720/H585 mm-Weight: 327 kg

Travel X/Y/Z: 800mm/500mm/420mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 4000rpm, feed: 2m/min, rapid traverse: 5m/min, quill stroke: 100mm, swivel: +/-45°. Machine dimensions X/Y/Z: approx. 3000mm/2500mm/2000mm, weight: approx. 3000kg, control: Heidenhain TNC 410, documentation available. On-site inspection is possible.

Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, speed: 6300rpm, feed: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The screen and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. On-site inspection is possible.

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally t ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

Moagem de eixo, polimento, fresadora Especificações: - Velocidades 850 a 12000 rpm - Eixo flexível aprox. 2 metros - Material rodante móvel - Adequado para ferramentas de moagem e polimento - Acionamento 380 V / 1.0 cv - Necessidade de espaço aprox. L 500 x A 1000 x P 500 mm - Peso aprox. 45 quilogramas - Material rodante móvel

Bezel, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 272 mm-Holes: Ø 24 mm-Dimensions: see photo technical drawing-Dimensions: 300/125/H50 mm-Weight: 8.9 kg

GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC a ...