subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 103)
CONTROLS conventional BASIC DESIGN basic design: cross bed WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 1120 mm Y-axis travel: 350 mm Z-axis travel: 400 mm distance spindle nose - table surface (max.): 420 mmTABLE table surface (left-right): 1600 mm table surface (front-back): 400 mm workpiece load (max): 1500 kgSPINDLE / HEAD spindle type: tilting head - mode of operation: manual - mode of operation: manual spindle revolutions (max): 28 /min number of gears: 1400 tool fixture: ISO SK 40 AXIS DRIVES feed velocity (min): 16 mm/min feed velocity (max): 800 mm/minELECTRICAL SPECIFICATIONS total power consumption: 14.5 kWDIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2350 mm total height: 2150 mm total weight approx.: 3700 kgATTAC ...
CONTROLS Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC- X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mmTABLE table surface (left-right): 800 mm table surface (front-back): 425 mm workpiece load (max): 250 kgSPINDLE / HEAD spindle revolutions (max): 4500 /min tool fixture: ISO SK 40 drive power: 7.5 kWELECTRICAL SPECIFICATIONS mains power supply: 13 kVADIMENSIONS / WEIGHTS space requirements -left/right-: 2720 mm space requirements -front/back-: 1850 mm total height: 2300 mm total weight approx.: 2025 kgca 2000 h
CONTROLS Point-to-point control (NC) HEIDENHAIN TNC 128 WORKING RANGE -CUBIC- X-axis travel: 610 mm Y-axis travel: 400 mm Z-axis travel: 450 mmTABLE table surface (left-right): 800 mm table surface (front-back): 425 mm workpiece load (max): 300 kgSPINDLE / HEAD spindle revolutions (max): 4500 /min tool fixture: ISO SK 40 DIMENSIONS / WEIGHTS total weight approx.: 2300 kgATTACHMENTS coolant unit: yes closed cabin: yes European CE standards: yes Approx. 1,000 operating hours.The Bench vise can be purchased optionally.
This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details.
This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document).
This vertical machining centre FEELER FV-800A was manufactured in 1995 and is equipped with a Mitsubishi Meldas 520AMR control system. The machine features a 20-position tool magazine. Consider the opportunity to buy this machine. Contact us for further details.
Dados técnicos mostrados na imagem. Peças mostradas à mão não vêm.
Key data: 800 mm
Os detalhes técnicos estão na imagem. Peças mostradas à mão não vêm.
x-travel: 330 mmy-travel: 400 mmz-travel: 380 mmspindle turning speed range: 63-2800 U/mintable-size: 650 x 245 mmdimensions of the machine ca.: 1200 x 1600 x 1800 mmxmmxmmweight of the machine ca.: 1.1 tmisc. accessories: Digital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
curso x: 300 mmy-curso: 150 mmz-curso: 355 mmeixo faixa de velocidade de giro: 58-2000 U/mintamanho da mesa: 700x250 mmdimensões da máquina ca.: 1300 x 1100 x 1700 mmxmmxmmpeso da máquina ca.: 0,85 tacessórios diversos: Leitura digital 3 eixos
Velocidades: 6000 ou 12000 rpm Processamento: Perfis de aço ou alumínio País de origem: Alemanha
Modelo: Trak DPM 750 Tipo: AEVF N° de Série: 513352 Controles: Proto Trak MX3, comutável para MX2 Curso: X, Y, Z 750 x 400 x 610 mm Tamanho da mesa: 1270 x 320 mm peso: 1900 kg Ano construção: 1995 País de origem: Taiwan
• Descrição: Fresadora com bancada de 3 eixos • Alimentação: 3x 400V • Dimensões: 1100 x 1600 x 1100 mm • Peso: 600 kg • Funcionamento desde: 21.05.2013 / P 1971 • Acessórios: fresadora e refrigeração nebulizadora e acessórios diversos
Tipo: Univer FC 100 Potência: 1,2 kW Fonte de alimentação: 380 Volt Consumo corrente: 3 A Peso ca: 125 kg Diretamente do cliente utilizado a partir de novembro da CH-Pratteln disponível.
This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information.
This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.
A máquina encontra-se em bom estado técnico; pode ser testada mediante acordo prévio.
This 3-axis DMG DECKEL MAHO DMC 104V linear was manufactured in 2006. It features an X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust table size of 1250 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 104V linear vertical machining centre we have for sale. Contact us for further details.
This 4-axis HARTFORD MVP-8A was manufactured in 2004. It features impressive travels of 860 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine includes a robust table size of 1000 x 560 mm with a load capacity of 500 kg, and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the HARTFORD MVP-8A vertical machining centre we have for sale. Contact us for further details.
This 3-axis HARTFORD PRO-800A was manufactured in 2005. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine is equipped with a spindle speed of 8,000 rpm and a tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HARTFORD PRO-800A vertical machining centre we have for sale. Contact us for further details.
Fabricante: Z-Mat Modelo: F 1060 Condição: Usada Número de stock: 9404 Sistema de controlo: FANUC Horário de funcionamento: 150 h Comprimento da mesa de trabalho: 1200 mm Largura da mesa de trabalho: 600 mm Carga máxima na mesa (uniforme): 600 kg Velocidade máxima vertical do fuso: 12000 1/min Curso do eixo X: 1000 mm Curso do eixo Y: 600 mm Eixo Z de percurso: 500 mm Número de todas as ferramentas: 24 peças Fuso: BT-40 Altura da máquina: 2400 mm Comprimento da máquina: 2700 mm Largura da máquina: 2150 mm Peso da máquina: 6300 kg
Fabricante: MAHO Modelo: MH 600 E Ano: 1989 Condição: Usada Número de stock: 9361 Comprimento da mesa de trabalho: 740 mm Largura da mesa de trabalho: 440 mm Carga máxima na mesa (par): 250 kg Velocidade máxima vertical do fuso: 4000 1/min Curso do eixo X: 600 mm Curso do eixo Y: 450 mm Eixo Z de percurso: 450 mm Cone: ISO 40 Altura da máquina: 2000 mm Comprimento da máquina: 3200 mm Largura da máquina: 2500 mm Peso da máquina: 3800 kg
Fabricante: MAHO Modelo: MH 500 W4 Ano: 1989 Condição: Usada N.º de Stock: 9360 Horas: 79368 h Comprimento da mesa de trabalho: 800 mm Largura da mesa de trabalho: 360 mm Carga máxima na mesa (par): 250 kg Potência de acionamento do fuso: 11 kW Velocidade máxima vertical do fuso: 4000 1/min Curso do eixo X: 500 mm Curso do eixo Y: 380 mm Eixo Z da viagem de percurso: 350 mm Cone: ISO 40 Altura da máquina: 1800 mm Comprimento da máquina: 1700 mm Largura da máquina: 2000 mm Peso da máquina: 2100 kg
Key data: 440 mm, 300 mm, 100 mm
Fabricante: Bridgeport Modelo: Série I Interact Condição: Usada Número de stock: 9355 Sistema de controlo: Heindenhain TNC 151 Curso do eixo X: 440 mm Curso do eixo Y: 300 mm Eixo Z de percurso: 100 mm Tabela móvel Fuso fixo
