obróbka blach używane na sprzedaż (3,270)

Cyfrowa regulacja głębokości, pedał nożny Auction-ID: A1-48006-61

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 €: 282.24 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 7 mm: 7 mm: 4 mm: 5 mm: 5 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement of  ...

material width:300 mmcoil weight:0,5 tcoil internal diameter:420 - 520 mmcoil external diameter:1400 mmweight:0,6 tdimensions (WxDxH):0,8 x 1,2 x 1,7 mexpansion:pneumatic

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 €: 557.72 €: 3200 mm: 2 mm: 1.2 mm: 3650 mm: 1700 mm: 1300 mm: 3100 kgNC-controlled backgauge 750 mmELGO P40T touchscreenRear light barrier protectionFront finger guard coverExtendable front support bracketCutting line illuminationEquipment compliant with CE directivesOperating instructions in German or EnglishOPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:250 mmmaterial thickness:0,25 - 3,0 mmno. of straightening rolls:11 straightening roll diameter:30 mmspeed:6 - 60 m/minpower requirement:15,0 kWweight:1,1 tdimensions (WxDxH):1,1 x 1,7 x 1,5 mstriaghtening pressure automatic:hydraulic coil loof control:ultrasonic

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 5010 mm: 1.5 mm: 2 mm: 4 : 4 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper system ...

Auction-ID: A1-48006-6

material width coil line:600 mmcoil weight:2 x 3,5 tcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmno. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mmfeed length:0 - 500 mmpower requirement:10,0 kWweight:10,0 tdimensions of the coil line:8,8 x 4,0 x 2,55 mstraightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:800 mmcoil weight:12,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1500 mmmaterial thickness:0,4 - 2,5 mmno. of straightening rolls:8 straightening roll diameter:53 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmspeed:35 m/minmaterial thickness at 150 mm material width:2,5 mmmaterial thickness at 650 mm material width:1,5 mmmaterial thickness at 800 mm material width:1,0 mmstraightening machine:RM 8-53/160-800 decoiler:HE 200-1000

material width:250 mmcoil weight:2,5 tcoil internal diameter:430 - 520 mmcoil external diameter:1650 mmmaterial thickness:0,5-6 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 weight straightener:1,2 tweight decoiler:1,4 tdimensions straightener (WxDxH):1,2 x 1,2 x 2,0 mdimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 mexpansion:hydraulic

table-size: mmvertical movement: mm

material width:203 mmmaterial thickness:0,1 - 1,9 mmfeed length:101 mmweight:0,1 tdimensions (WxDxH):0,5 x 0,8 x 0,5 m

material width:450 mmmaterial thickness:1,0 - 14,0 mmcoil weight:10,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1100 - 2000 mmno. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmmin. material width:100 mmspeed:15 m/minpower requirement:75,0 kWweight of decoiler:6,4 tweight of straightening machine:12,8 tdimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mmdimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mmstraightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

material width coil line:600 mmcoil weight in kg:2 x 3000 kgcoil internal diameter:460 - 630 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmNumber of Straightening rolls:9 roll diameter:30 mmmaterial cross-cut:1200 mm²weight:9,5 tDimensions (WxDxH):4,3 x 2,6 x 2,6 mstraightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

material width:250 mmmaterial thickness:0,5 - 4,0 mmno. of straightening rolls:9 straightening roll diameter:60 mmnumber of draw-in rolls:2 power requirement:3,8 kWWeight:0,8 tDimensions (WxDxH):1,6 x 0,8 x 1,5 m

Auction-ID: A1-48006-222

plate width: / mmplate thickness: / mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil internal dia.: 360 -440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:500 mmcoil weight:3,0 tmaterial thickness:0,2 - 2,5 mmcoil internal diameter:470 - 530 mmcoil external diameter:1400 mmno. of straightening rolls:9 straightening roll diameter:40 mmnumber of inlet and outlet rolls:4 material cross-cut:1200 mm²speed:1,5 - 30 m/mindimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 mweight decoiler:1,1 tdimensions straightener (WxDxH):3,3 x 1,3 x 2,7 mweight straightener:3,0 tstraightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

sheet width:400 mmplate length:500 mmplate thickness:4 mmtotal power requirement:0,5 kWPunching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting

Nożyczki do cięcia ręcznego Auction-ID: A1-48006-70

material width:600 mmmaterial thickness: - 4,0 mmno. of straightening rolls:21 straightening roll diameter:30 mmmaterial cross-cut:1800 mm²speed:6 - 36 m/minPower capacity:4,5 kWWeight:2,0 tDimensions (WxDxH):1,5 x 2,0 x 1,9 m

material width:70 mmmaterial thickness:0 - 1,5 mmfeed length:100 mmmaterial cross-cut:60 mm²feeding force:400 Nclamping force of feeding pincer:1300 Nair pressure - required:3 - 6 barWeight:0,01 tDimensions (WxDxH):0,4 x 0,4 x 0,7 m

sheet width:2000 mmplate thickness:1.8 mmControls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mmRAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mmDECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. di ...

HYDRAULICZNA PRASA DZIURKOWA Inv. nr 13.190P1 Stwórz GEKA Model HYDRACROP 50SD Mach.no. 8229 Udobrowność 50 ton Dziurkowanie Ø 28 w 13 mm Cięcie okrągłe 40 mm Cięcie kwadratowe 40 mm Kątowy pręt 120 x 120 x 10 mm Kierownica płaska 200 x 20 mm Moc silnika 5 kW Waga 1110 kg Auction-ID: A1-47470-180

Zawiera bloki do wygięcia do 2 cali. Auction-ID: A1-48006-80

band width:1050 mmplate thickness:8 mmnumber of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mmFEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mmLEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/minELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 HzTechnical description :Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:- LAWECO COIL LO ...

Hydrauliczna obcinacza węży Parker Auction-ID: A1-47349-15

Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Working height: variable from 0,5mm ? 150mm adjustableWorking width: 1150 mmMaximum part weight: 300 kgWide belts with abrasive belt unwinding: 2200 mmAs standard with vacuum hold system, optional with magnetic hold systemDue to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up to 3 internal machining units and an additional external machining unit.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com