サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 108)
Welding-turning-tilting table - Remote control - Welding current transmission max. 500 amps - Face disc passage 80mm Table diameter 650 mm Table load 600 kg Swivel range 90 degrees Speed 0.2 - 3.0 rpm Total power requirement 0.55 + 0.4 kW Machine weight approx. 0.28 t 0.85 x 0.75 x 0.75m Documentation in English. Condition: never used / new (5) Auction-ID: A7-46642-239
Electrode dryer see pictures Auction-ID: A7-46642-195
Welding helmet with adjustable self-darkening filter see pictures Condition: never used / new (5) Auction-ID: A7-46642-181
Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5) Auction-ID: A7-46642-62
Welding table / hole table: with milled and deburred holes Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Auction-ID: A7-46642-117
Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 100mm 2 pcs stop and clamping angle 175mm 2 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 pc. eccentric stop 100mm diameter 1 Burner Holder 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, natural, organic based 2 pcs Welding Table Cleaner 500ml, natural, bio-based Condition: never used / new (5) Auction-ID: A7-46642-168
MAG welding machine with: Hose package 3m Welding current max. 250 A Connection voltage 400 V Weight 170 kg Dimensions LxWxH 700 x 450 x 750 mm Condition: unchecked (6) Auction-ID: A7-46642-211
In order to submit an offer on this lot, a deposit of € 1500 is required. To receive the bank details necessary for the transfer, please contact the auction contact person at matteo.tosin@surplex.com. As stated in the notice of sale: The lot includes goods that do not comply with EC regulations. Purchase is allowed only: outside the European Community, with documentation drawn up by SURPLEX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Please read carefully the procedures described in the attached notice of sale and follow the instructions as participation in the auction implies their full and unconditional acceptance. Auction-ID: A7-46670-3
In order to submit a bid on this lot, a deposit of € 100 is required. To receive the bank details necessary for the transfer, please contact the auction contact person at matteo.tosin@surplex.com. As indicated in the notice of sale: The purchase is allowed within the European Community exclusively for the purpose of scrapping or compliance with regulations, subject to the signing of a specific commitment written and subsequent delivery of the documents of the scrapping from by specialized subjects (form and certificate of completion scrapping) no later than 5 days from the collection of the asset. In the event of the award of goods intended for scrapping, the successful tenderer, at the time of collection, you must fill in and sign the Waste Identification (FIR), consisting of four copies, one of which must be issued to the transferor at the same time as the collection of goo ...
table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 28 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ROBOTIC ARM ABB IRB 1600 6/1.45 Wrist load 6 kg Maximum reach 1450 mm Repeatability +/- 0.02 mm ABB IRBP R300 POSITIONER Max load capacity 300 kg Max rolling diameter 1000 mm Distance between tailstocks 1600 mm WELDING POWER SOURCE FRONIUS TPS 500i Max welding current 500A Operating voltage 14.2 - 39.0 V Frequency 50 / 60 Hz Max power 480 kVA WIRE FEEDER FRONIUS WF 25i R Wire speed 1 - 25 m/min Wire diameter 0.8 - 1.6 mm 4 rollers Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-20
COMAU SMART H1 ROBOTIC ARM Wrist load 125 kg Maximum reach 2401 mm Repeatability +/- 0.3 mm Brushless AC Motors Power 7 kw CONTROL UNIT FOR ROBOTS COMAU SMART-3 6.125 Three-phase power supply 380V - 500V Power 7.0 kVA Breaking capacity 7kA/500V GEM WELDING CONTROL UNIT Voltage 400 V 3 Steps Frequency 50 Hz Max power 480 kVA DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-19
DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-21
体積容量:- m³ / h総電力要求:- 機械のkW重量 ca.: - 機械のt寸法 ca.: mこの広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
溶接電流:最大250 オープンサーキット電圧:最大66ボルト接続負荷周波 :400 V 重量:65 kg 寸法(LxWxH):900 x 500 x 750 mmMIG/MAG ガスシールド溶接機:3mホースパッケージを含む。こ 広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
テーブル直径:790mm 積載量:500kg回転範囲:0 - 135 グレード旋盤速度:最大。 2,0 U/minconnected 負荷周波数:400 V重量:0.95 t。寸法(LxWxH):1.4 x 0.8 x 1.5 m溶接ターンテーブル(フットスイッチ付きコントロ ルコラム、630mmチャック、チャックキー)この広告の データはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
体積容量:- m³ / h総電力要求:- 機械のkW重量 ca.: - 機械のt寸法 ca.: mこの広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
容量容量:1000(1400) m³ / 付属品および機器:: KUA - 3 / H 溶接用煙等級:W3 総電力要求:1.1 kW 機械の重量 ca.: - t寸法 ca.: - m本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / perforated tableincluding accessory set WMT Basic-Set 2.0The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3)Surface hardness 850 VickersSurfaces that have been ground down and planed smooth.Hole diameter: 28mm, countersunk by 3mm100 x 100mm gridSide panels 200mmHole spacing in the side panels 50mm, diagonal gridHeight adjustable from approx. 830 - 890mmSubstructure reinforced with 140 x 15mm flat steelIncluding base bearings, 110mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
テーブル長:1200mm テーブル幅:800mm テーブル高さ:980mm:kg機械重量約0.95 tワークステーション- 穴径:28mm- グリッド:100 x 100 mm- サイドパネル:150 mm- パネル厚:10mm この広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
番号:93 位置重量:320 kg コンディション:neu:28 mm 寸法:1.0 x 0.6 x 0.85 m特殊93ピースセット、28mmシステムツールトロリーを 含む 素材:研磨された高品質鋼材 配送範囲:画像参照 この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
番号:102 位置重量:320 kg コンディション:neu:28 mm 寸法:1.0 x 0.6 x 0.85 m 特殊102ピースセット、28mmシステムツールトロリーを 含む 素材:研磨された高品質鋼材 配送範囲:画像参照 この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
2.600 € 
