プレス 中古 販売のため (1,790)

pressure:160 tthroat:370 mmstroke:150 mmtotal power requirement:45 kWweight of the machine ca.:22 tdimensions of the machine ca.:2,75 x 1,85 x x 4,80 mrules for accident prevention:Vorhanden work table::1500 x 700 mmDocuments:vorhanden

pressure:60 tdistance between columns:650 mmstroke:220 mmdistance table/ram, max. stroke up, adjustment up:410 mmtable surface area:600 x 525 mmpressure of drawing cushion in table:5 tstroke of drawing cushion in table:80 mmtable height over floor:900 mmside window:200 mmram surface:560 x 490 mmdimensions (WxDxH):1,9 x 1,3 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick FGS 600 drawing cushion in table:hydraulic foundation pit:not necessary

pressure:20 tStroke:230 mmtable surface area:Ø600 mmdistance table - lower edge of ram:770 mmweight:595 kg

pressure:60 tdistance between columns:650 mmstroke:220 mmdistance table/ram, max. stroke up, adjustment up:410 mmtable surface area:600 x 525 mmhole in the table:110 mmtable height over floor:900 mmside window:200 mmram surface:560 x 490 mmpower requirement:15,0 kWdimensions (WxDxH):1,9 x 1,3 x 2,7 mfoundation pit:not necessary

pressure:250 tdistance between columns:1110 mmstroke:250 mmDistance table/ram, max. stroke up, adjustment up:500 mmTable surface area:1100 x 900 mmTable height above floor:950 mmSide window:690 mmRam surface:1100 x 900 mmOil volume:730 lPower capacity:56,0 kWDimensions (WxDxH):2,3 x 1,55 x 3,96 m

pressure:6,3 tthroat:170/180 mmstroke:310 mmpower capacity:3 kWdayligth:775 mmweight of the machine ca.:1,5 tclamping table:470 x 330 mmtable height over floor:800 mmC-Type1 Station

pressure:160 tthroat:360 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:920 x 700 mmHole in the table:150 mmtable height over floor:960 mmpassage to the back:590 mmram surface:620 x 560 mmspeed down:390 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:16,0 tdimensions (WxDxH):1,6 x 2,5 x 3,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch

pressure:2000 tdistance between columns:975 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1015 x 1050 mmtable height over floor:800 mmcapacity of ejector in table:6,3 tejector stroke in table:100 mmcapacity of ejector in ram:65 tejector stroke in ram:100 mmram surface:975 x 1050 mmreturn capacity:150 tspeed down:235 mm/sspeed up:250 mm/sworking speed:5 - 20 mm/soil volume:4000 lheight over floor:3,65 mheight beneath floor:3,75 mpower requirement:194,0 kWweight:105,0 tdimensions (WxDxH):5,0 x 6,5 x 7,4 m

pressure:100 tdistance between columns:1000 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:980 x 700 mmpressure of drawing cushion in table:4 x 10 / 1 x 20 tstroke of drawing cushion in table:180 mmtable height over floor:800 mmside window:400 mmram surface:1000 x 700 mmspeed down:500 mm/sspeed up:450 mm/sworking speed:60 mm/spower requirement:40,0 kWdimensions (WxDxH):1,5 x 1,4 x 4,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:4 x 10 t + 1 x 20 t, getrennt einschaltbar foundation pit:nicht erforderlich

pressure:200 tdistance between columns:970 mmstroke:360 mmDistance table/ram, max. stroke up, adjustment up:630 mmtable surface area:1000 x 800 mmcapacity of ejector:10 tejector stroke in table:160 mmtable height over floor:850 mmside window:400 mmram surface:1000 x 800 mmspeed down:420 mm/sspeed up:410 mm/sworking speed:50 mm/soil volume:1240 lreturn capacity:24 tpower requirement:45,0 + 15,0 kWweight:16,0 tdimensions (WxDxH):2,7 x 2,5 x 4,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:mechanisch foundation pit:nicht erforderlich

nominal force:160 tstroke:140 mmno. of strokes:85 /mindistance between columns:400 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:400 x 450 mmtable height over floor:800 mmAllowed max. force:230 tram surface:400 x 320 mmspindle diameter:125 mmpower requirement:7,35 kWweight:5,0 tdimensions (WxDxH):1,7 x 1,2 x 2,9 m

pressure:063 tthroat:450 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:720 x 800 mmhole in the table:280/250 mmtable height over floor:800 mmpassage to the back:290 mmram surface:450 x 280 mmram adjustment:63 mmpower requirement:7,5 kWweight:4,7 tdimensions (WxDxH):1,3 x 2,0 x 2,65 mclutch:pneumatisch overload protection in ram:mechanisch

Pressure:063 tthroat:400 mmstroke:16 - 90 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:1000 x 750 mmhole in the table:260 x 140 mmtable height over floor:710 mmram surface:600 x 220 mmram adjustment:50 mmweight:4,3 tdimensions (WxDxH):1,1 x 2,6 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

pressure:100 tthroat:540 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:50 tstroke of drawing cushion in table:200 mmdie cushion area:710 x 650 mmtable height over floor:910 mmram surface:1000 x 1000 mmcapacity of ejector in ram:2 tejector stroke in ram:200 mmreturn capacity:19,5 tspeed down:400 mm/sspeed up:300 mm/sworking speed:57,7 mm/soil volume:650 lpower requirement:37,5 kWweight:15,0 tdimensions (WxDxH):1,5 x 2,5 x 4,45 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch

pressure:40 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:660 / 1000 mmtable surface area:630 x 500 mmhole in the table:200 mmtable height over floor:1060 / 720 mmram surface:450 x 360 mmspeed down:60 mm/sspeed up:300 mm/spower requirement:7,5 kWweight:2,75 tdimensions (WxDxH):1,0 x 1,8 x 3,05 madditional plate in table:height approx. 340 mm

pressure:050 tthroat:255 mmstroke:8 - 120 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:640 x 500 mmhole in the table:250 x 180 mmtable height over floor:710 - 930 mmtable adjustable:220 mmram surface:550 x 170 mmram adjustment:70 mmpower requirement:4,0 kWweight:3,1 tdimensions (WxDxH):1,5 x 1,5 x 2,3 m

pressure:150 tdistance between columns:300 mmstroke:180 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:570x180 / 300x410 mmtable height over floor:875 mmside window:180 mmram surface:180 mmspeed down:250 mm/sspeed up:160 mm/sworking speed:6 - 12 mm/soil volume:250 lpower requirement:11,0 kWweight:2,4 tdimensions (WxDxH):1,3 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

pressure:40 tthroat:360 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:600 mmtable surface area:620 x 500 mmpressure of drawing cushion in table:16 tstroke of drawing cushion in table:150 mmtable height over floor:850 mmram surface:300 x 250 mmspeed down:200 mm/sspeed up:200 mm/sworking speed:40 mm/spower requirement:11,0 kWweight:2,8 tdimensions (WxDxH):1,1 x 1,7 x 3,0 mdrawing cushion in table:hydraulisch

equipped with adjustable shape stamp Auction-ID: A1-49836-9

Lot of bending tools, incl. metal shelf, different sizes and lengths for more details see photos Auction-ID: A7-49942-1059

Hand Pesse (Schmidt) + Screw Feeder NJR-23 (OHTAKE) and Accessories , Dimensions: 250x80x70 , 130x80x50 , 280x130x140 , for more details see photos of the nameplates Auction-ID: A7-49942-1101

Type: 11V-04-2006 , Dimension: 250x200x550, see photos for more details Auction-ID: A7-49942-1103

Tools press brake belonging to lot 2. Cart edging tools not included Auction-ID: A1-48649-3

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kg very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinder = double-acting cylinder- upper  ...

Dimensions: 330x250x600, instructions available, see photos for more details Auction-ID: A7-49942-1104

Includes 1 set of tools Auction-ID: A1-49836-20

Auction-ID: A1-49836-84

Different types Auction-ID: A7-49773-432

AXIAL PHA-653 Hydraulic Press Brake Year: 2001 Machine No.: 010653181 Bending force: 65 t Maximum folding length: 3,000 mm Stroke: 100 mm Hydraulic unit: ATOS Motor power: 4 kW Power supply: 380 V / 50 Hz / 3 phases Maximum Intensity: 10.5 A Pressure: 245 kg/cm² Approach speed: 100 mm/s Working speed: 9 mm/s Return speed: 90 mm/s Weight: 4,500 kg Auction-ID: A7-49809-5