プレス 中古 販売のため (1,696)

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 €: 2504.25 €: 200 to: 500 mm: 1250x1000 mm: 600 mm: 25 mm/s: 3,5 mm/s: 7.5 kW: 1550 mm: 1300 mm: 2700 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of  ...

pressure:160 tdistance between columns:1580/1360 mmstroke:320 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:870 mmram surface:1400 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:22,6 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:160 tdistance between columns:1600/1420 mmstroke:345 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:770 mmram surface:1410 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:23,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:60 - 180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:560 x 400 mmhole in the table:150 mmtable height over floor:800 mmpassage to the back:240 mmram surface:355 x 220 mmram adjustment:50 mmweight:3,0 tdimensions (WxDxH):1,0 x 1,4 x 2,2 minfinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz

pressure:300 tdistance between columns:1800 mmstroke:1000 mmDistance table/ram, max. stroke up, adjustment up:1300 mmTable surface area:1600 x 1200 mmTable height above floor:1080 mmRam surface:1600 x 1200 mmWeight:24,0 tDimensions (WxDxH):2,8 x 2,1 x 6,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

: gebraucht : 2023 : 070029 : prompt, Zwischenverkauf v : Türkei : 19600 €: 1 : 150 to: fix : 1520 mm: 300 mm: 1520 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 10 mm: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2450 mm: 3270 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel and foot pedalHeight adjustable tableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:900 x 560 mmtable height over floor:710 mmram surface:630 x 400 mmspeed down:200 mm/sspeed up:200 mm/spower requirement:17,0 kWweight:5,0 tDimensions (WxDxH):1,2 x 1,9 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:400 tdistance between columns:1100 mmstroke:250 mmno. of strokes:25 - 75 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1100 x 965 mmcapacity of ejector in table:30 tejector stroke of ejector in table:80 mmcapacity of ejector in ram:3 tstroke of ejector in ram:60 / 70 mmram surface:980 x 800 mmcolumn travel -side:800 mmram adjustment:20 mmpower capacity:80,0 + 5,5 kWweight:47,0 tDimensions (WxDxH):3,5 x 3,3 x 6,0 mweight of switch cabinet:1,4 tdimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 mejector in ram:hydraulic

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 €: 2324.7 €: 170 to: 500 mm: 1200x700 mm: 600 mm: 110 mm/s: 7 mm/s: 70 mm/s: 19 kW: 2700 mm: 1600 mm: 2650 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure:040 tthroat:180 mmstroke:0 - 76 mmno. of strokes:145 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:600 x 360 mmhole in the table:110 mmtable height over floor:800 mmram surface:270 x 175 mmram adjustment:65 mmpower capacity:2,2 kWweight:1,75 tDimensions (WxDxH):1,1 x 1,2 x 2,1 mGerman Safety: permitted for manual loading:CE-sign clutch:pneumatic

pressure:100 tdistance between columns:1250 mmstroke:1035 mmtable surface area:890 x 1280 mmdistance table/ram, max. stroke up, adjustment up:1035 mmtable height over floor:630 mmram surface:1000 x 1200 mmside window:700 mmmax. tool weight:7 tmax. capacity of swivelling ram plate:3,5 toil volume:180 lpower capacity:9,0 kWweight:11,0 tDimensions (WxDxH):2,1 x 3,8 x 3,9 mram interlocking:hydraulic

pressure:620 tdistance between columns:2250 mmstroke:1250 mmDistance table/ram, max. stroke up, adjustment up:1600 mmtable surface area:2200 x 1280 mmram surface:2200 x 1500 mmtable height over floor:800 / 1000 mmcolumn travel -side:750 mmfeed down:10 - 250 mm/secfeed up:10 - 500 mm/secworking feed:1 - 24 mm/secoil volume:2000 lpower capacity:45,0 + kWweight:42,0 tDimensions (WxDxH):3,7 x 2,6 x 6,8 mGerman Safety: permitted for manual loading:CE-sign foundation pit:not necessary

: neu : ca. 4 Monate ab Auftragse : Italien : 38200 €: 729.62 €: 70 to: 500 mm: 700x350 mm: 700x500 mm: 500 mm: 250 mm: 24 mm/s: 5 mm/s: 4 kW: 1500 mm: 1000 mm: 2500 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 82000 €: 1549.8 €: 200 to: 500 mm: 870x500 mm: 1000x600 mm: 500 mm: 300 mm: 21 mm/s: 3 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3000 mm: 8200 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual OPTIONS: Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 111800 €: 2113.02 €: 125 to: 5.5 mm: 1100 mm: 630 mm: 180 mm: 15 - 150 mm: 42 - 65 1/min: 700x400 mm: 8 : 90 mm: 320 mm: 610 mm: 15 kW: 1400 mm: 2200 mm: 3120 mm: 12500 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS  ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 101500 €: 1918.35 €: 100 to: 5 mm: 1000 mm: 630 mm: 180 mm: 15 - 140 mm: 45 - 70 1/min: 8 : 90 mm: 320 mm: 570 mm: 11 kW: 1320 mm: 2200 mm: 3080 mm: 10000 kg8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationsafety light guard Keyenceuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- Press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of  ...

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 €: 804.11 €: 1 : 42100 €: 60 to: 2100 mm: X und Y Achse : 160 mm: 1700 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 7.5 kW: 2450 mm: 1600 mm: 2235 mm: 4340 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslaser safety device Fiesslermotorized crowning tableintermediate pieces for the upper tool clampingdie holder for 60 mm toolsdie with 4 V openingsupper tool, slightly cranked, sectionedfoot pedaluser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 €: 1347.57 €: 60 to: 500 mm: 800x500 mm: 600 mm: 120 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1100 mm: 2350 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31400 €: 599.74 €: 100 to: 500 mm: 800x600 mm: 615 mm: 26 mm/s: 4 mm/s: 4 kW: 1600 mm: 900 mm: 2300 mm: 3100 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 74100 €: 1400.49 €: 100 to: 300 mm: 600 x 900 mm: 700x1100 mm: 550 mm: 100 mm/s: 8,5 mm/s: 165 mm/s: 11 kW: 2100 mm: 2050 mm: 3050 mm: 6500 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 114100 €: 2156.49 €: 135 to: 3050 mm: 4 : 320 mm: 3340 mm: 500 mm: servomotorischer Riemenan : 100 mm/s: 10 mm/s: 100 mm/s: 650 mm: 250 mm: 4200 mm: 2200 mm: 2550 mm: 7300 kgservomotor drive with multiple switched flat belt system4 axes (Y1, Y2,X, R)CNC control DELEM DA-66S- 2D touchscreen display 17- 3D visualisation in simulation and production- intuitive touch-screen control (simple drawing of the bending outline with your finger)- simple and convenient data transfer- multi-simulation option- user friendly programming in dialogue form- graphic simulation of the bending sequenceservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)safety device BLVT light guardlinear guided sheet support ar ...

: neu : Türkei : 70700 €: 1336.23 €: 100 to: 600 mm: 900 x 500 mm: 800 mm: 400 mm: 220 mm/s: 1 - 20 mm/s: 250 mm/s: 14,65 kW: 1900 mm: 1700 mm: 4400 mm: 6000 kg: 30 - 239 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesPump, valves, and filters from Bosch RextrothHydraulic overload valveCoolerSiemens electrical components8 additional signal inputs and outputs10-inch touchscreenPLC Siemens S7 1200Stroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A1-48838-1

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 28800 €: 550.08 €: 20 to: 1.7 mm: 360 mm: 550 mm: 140 mm: 1 - 50 mm: 160 1/min: 4 : 40 mm: 35 mm: 200 mm: 240 mm: 2.2 kW: 1360 mm: 1100 mm: 1860 mm: 1250 kgWelded steel frame construction4-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentManual ram adjustmentVariable stroke rate via frequency converterOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationTouchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs2 free cams for connecting peripheralsAutomatic central lubrication ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 €: 3536.19 €: 400 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3400 mm: 410 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 2 x 11 kW: 5750 mm: 2110 mm: 3450 mm: 27780 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Wi ...

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 €: 658.95 €: 100 to: fix : 835 mm: 500 mm: 780 mm: 1050 mm: 25 mm/s: 10 mm/s: 4 mm/s: 800 x 600 mm: 700 x 350 mm: 1800 mm: 1000 mm: 2400 mm: 2050 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guard ...

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 €: 1695.33 €: 85 to: 500 mm: 700x400 mm: 800x600 mm: 600 mm: 300 mm: 105 mm/s: 41 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 1200 mm: 1600 mm: 2500 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 138000 €: 2608.2 €: 170 to: 500 mm: 870x500 mm: 1000x600 mm: 600 mm: 300 mm: 110 mm/s: 42 mm/s: 7 mm/s: 70 mm/s: 19 kW: 1500 mm: 1950 mm: 2650 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 199300 €: 3766.77 €: 250 to: 8 mm: 1400 mm: 800 mm: 250 mm: 23 - 220 mm: 25 - 50 1/min: 950x620 mm: 8 : 120 mm: 410 mm: 820 mm: 33 kW: 1600 mm: 2900 mm: 4250 mm: 25000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view-overload protectorPRICE FCA ITALYThe data for this ad was created ...