プレス 中古 販売のため (1,691)

pressure:160 tthroat:690 mmstroke:8 - 180 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1000 mmhole in the table:400 / 120 mmtable height over floor:850 mmpassage to the back:900 mmram surface:1000 x 700 mmram adjustment:130 mmpower requirement:11,0 kWweight:19,0 tdimensions (WxDxH):2,4 x 2,8 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

pressure:63 tthroat:325 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:700 mmtable surface area:640 x 640 mmpressure of drawing cushion in table:25 tstroke of drawing cushion in table:200 mmdie cushion area:450 x 450 mmtable height over floor:800 mmram surface:560 x 560 mmoil volume:450 lpower requirement:15,0 kWweight:7,0 tdimensions (WxDxH):1,2 x 2,0 x 3,1 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

: neu : Türkei : 70700 €: 1336.23 €: 100 to: 600 mm: 900 x 500 mm: 800 mm: 400 mm: 220 mm/s: 1 - 20 mm/s: 250 mm/s: 14,65 kW: 1900 mm: 1700 mm: 4400 mm: 6000 kg: 30 - 239 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesPump, valves, and filters from Bosch RextrothHydraulic overload valveCoolerSiemens electrical components8 additional signal inputs and outputs10-inch touchscreenPLC Siemens S7 1200Stroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 tthroat:320 mmstroke:160 mmdistance table/ram, max. stroke up, adjustment up:480 mmtable surface area:630 x 550 mmhole in the table:200 mmtable height over floor:860 mmram surface:560 x 450 mmoil volume:500 lpower requirement:30,5 kWweight:6,4 tdimensions (WxDxH):1,6 x 2,0 x 2,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:hydraulic depth stop:mechanical

pressure:160 tthroat:480 mmstroke fix:fix 180 mmno. of strokes:25 - 70 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1100 x 900 mmHole in the table:450 mmtable height over floor:900 mmpassage to the back:700 mmram surface:900 x 600 mmram adjustment:144 mmpower requirement:30,75 kWweight:15,3 tdimensions (WxDxH):2,0 x 2,4 x 3,75 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Desch overload protection in ram:hydraulic ram counterbalance:pneumatic

: neu : 2025 : 080109 : prompt, Zwischenverkauf v : Türkei : 68282 €: 1135.89 €: 1 : 1 : 60100 €: 120 to: 3050 mm: Y1 / Y2 / X und R Achse : 180 mm: 2550 mm: 250 mm: 375 mm: hydraulisch : 100 mm/s: 9 mm/s: 77 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 878 mm: 104 mm: 150 l: 11 kW: 3750 mm: 1230 mm: 2400 mm: 5900 kg4 axes (Y1, Y2, X and R axes)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC controlled crowning tableintermediate clam ...

pressure:100 tthroat:300 mmstroke:20 - 120 mmno. of strokes:55 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:800 x 560 mmhole in the table:310 x 180 mmtable height over floor:745 mmram surface:520 x 245 mmram adjustment:75 mmpower requirement:5,5 kWweight:5,5 tdimensions (WxDxH):1,1 x 2,4 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical

pressure:40 tthroat:350 mmmaterial thickness: - 12 mmstamping power-diameter at 12 mm material thickness:24 mmstamping power-diameter at 6 mm material thickness:50 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):0,8 x 1,5 x 1,9 m

pressure:315 tthroat:480 mmstroke:20 - 190 mmno. of strokes:36 + 45 /mindistance table/ram, max. stroke up, adjustment up:615 mmtable surface area:1400 x 880 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:950 mmram surface:850 x 630 mmram adjustment:125 mmpower requirement:33,0 kWweight:30,0 tdimensions (WxDxH):2,0 x 3,0 x 4,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic overload protection in ram:hydraulic stroke adjustment:semi-automatic ram adjustment:motoric ram counterbalance:pneumatic

pressure:200 tstroke:30 - 160 mmno. of strokes:40 - 120 /mindistance between columns:1500 mmdistance between oil collecting pans:1300 mmdistance table/ram, max. stroke up, adjustment up:860 mmhole in the table:550 x 300 mmtable surface area:1250 x 1250 mmtable height over floor:1000 mmcolumn travel -side:600 x 530 mmram surface:1250 x 1000 mmram adjustment:125 mmMaterial width of feeder:30 - 500 mmMaterial thickness feeder:0,5 - 3,0 mmfeeding length:0 - 999,9 mmpower requirement:50,0 kWweight:34,0 tdimensions (WxDxH):4,0 x 1,7 x 5,2 mclutch-/ brake combination:pneumatisch, Ortlinghaus overload protection in ram:hydraulisch ram adjustment:automatisch stroke adjustment:automatisch ram counterbalance:pneumatisch roll feed:Weingarten, WE 60 Option: NEW electrical controls:Siemens S7-1500 F

pressure:40 tdistance between columns:620 mmstroke:975 mmdistance table/ram, max. stroke up, adjustment up:940 mmtable surface area:590 x 1000 mmtable height over floor:770 mmram surface:590 x 1000 mmside window:470 mmmax. tool weight:2,5 tmax. capacity of swivelling ram plate:1,5 tSpeed down:0 - 50 mm/sSpeed up:0 - 34 mm/sWorking speed:0 - 10 mm/soil volume:150 lpower requirement:9,5 kWweight:3,2 tdimensions (WxDxH):2,0 x 2,4 x 3,0 m

pressure:500 tdistance between columns:1220 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1600 x 1200 mmpressure of drawing cushion in table:320 tstroke of drawing cushion in table:150 mmdrawing cushion surface in table:750 x 625 mmpressure of drawing cushion in ram:180 tstroke of drawing cushion in ram:100 mmdrawing cushion area in ram:750 x 625 mmram surface:1600 x 1200 mmtable height over floor:800 mmspeed down:665 mm/sspeed up:530 mm/sworking speed:34 - 100 mm/squantity of oil:2000 lpower requirement:180,0 kWweight:40,0 tDimensions (WxDxH):3,2 x 2,4 x 7,5 mDepth of foundation pit:4,1 mHeight above floor:5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:125 tdistance between columns:2100 mmstroke:1000 mmDistance table/ram, max. stroke up, adjustment up:1300 mmTable area:2230 x 1300 mmdie cushion pressure in table:63 tdie cushion stroke in table:60 mmsurface of drawing cushion:1000 x 900 mmtable height above floor:1050 mmside window:1000 mmram surface:2100 x 1000 mmspeed down:50 mm/sspeed up:50 mm/sworking speed:10 mm/soil volume:410 lheight above floor:5,95 mmpower requirement:22,0 kWWeight:31,0 tDimensions (WxDxH):3,1 x 1,7 x 5,95 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary

pressure:63 tthroat:280 mmstroke:160 mmDistance table/ram, max. stroke up, adjustment up:360 mmtable surface area:560 x 490 mmhole in the table:125 mmtable height above floor:860 mmram surface:280 x 280 mmpower requirement:22,0 kWweight:3,6 tdimensions (W x D x H):0,8 x 1,7 x 2,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:315 tdistance between columns:1750 mmstroke:700 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1600 x 1500 mmpressure of drawing cushion in table:125 tstroke of drawing cushion in table:200 mmdie cushion area:1200 x 1400 mmtable height over floor:750 mmram surface:1640 x 1500 mmpower requirement:55,0 + 11,0 kWweight:29,5 tdimensions (WxDxH):3,2 x 4,5 x 5,8 mHeight above floor:5,1 mGerman Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 drawing cushion in table:hydraulisch cutting impact absorption:hydraulic

pressure:3500 tstroke:900 mmDistance table / ram, stroke down:1000 mmdistance table / ram, stroke up:1900 mmtable surface area:3150 x 2150 mmram surface:3150 x 2150 mmTotal Weight of Tool max.:30,0 tWeight of Tool Top Part max.:20,0 tspeed down:400 mm/sworking speed:0,9 - 9,2 mm/sHydraulic Operating Pressure:280 baroil volume:5500 lrated current:760 Avoltage:400 Vfrequency:50 Hzpower requirement:425 kWweight:231,0 t

Pressure:080 tthroat:280 mmstroke:20 - 120 mmno. of strokes:42 - 125 /mindistance table/ram, max. stroke up, adjustment up:510 mmtable surface area:700 x 560 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:320 mmram surface:560 x 350 mmram adjustment:72 mmWeight:5,2 tDimensions (WxDxH):1,6 x 1,6 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

Pressure:63 tdistance between columns:1000 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:850 mmtable surface area:980 x 500 mmtable height above floor:850 mmram surface:130 mmspeed down:400 mm/sspeed up:461 mm/sworking speed:14 - 97 mm/spower requirement:15,0 kWWeight:5,0 tDimensions (WxDxH):2,0 x 1,6 x 3,9 mdepth stop:mechanical foundation pit:not necessary

Pressure:080 tthroat:300 mmstroke:8 - 140 mmno. of strokes:60 / 90 /mindistance table/ram, max. stroke up, adjustment up:420 mmtable surface area:800 x 600 mmhole in the table:330 x 230 mmtable adjustable:230 mmtable height over floor:750 - 980 mmram surface:600 x 240 mmram adjustment:100 mmpower capacity:4,5 / 6,9 kWWeight:5,5 tDimensions (WxDxH):1,4 x 2,5 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic

Pressure:160 tdistance between columns:1250 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:700 mmTable area:1200 x 800 mmtable height over floor:850 mmdie cushion pressure in table:63 ? tdie cushion stroke in table:200 mmdie cushion area:780 x 650 mmside window:300 mmram surface:1000 x 800 mmspeed down:400 mm/sspeed up:400 mm/sworking speed:106 mm/soil volume:1800 lpower capacity:2 x 30,0 kWweight:16,7 tDimensions (WxDxH):2,45 x 2,35 x 4,5 m

Pressure:150 tstroke:fix 80 mmno. of strokes:30 - 150 /mindistance between columns:930 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:880x1300/1500x600 mmhole in the table:760 x 180 mmtable height over floor:1270 mmcolumn travel -side:650 mmram surface:920x1000/1300x600 mmweight:27,5 tDimensions (WxDxH):3,1 x 1,8 x 4,3 mWITHOUT feeder:can be offered optionally

pressure:100 tdistance between columns:770 mmstroke:400 mmdistance table/ram, stroke up:800 mmTable area:770 x 900 mmtable height above floor:850 mmdie cushion pressure in table:40 tdie cushion stroke in table:200 mmdie cushion area in table:600 x 600 mmside window:600 mmram surface:770 x 900 mmspeed down:62 mm/sspeed up:350 mm/sworking speed:17,5 mm/soil volume:700 lpower requirement:42,0 kWweight:9,0 tDimensions (WxDxH):2,6x 2,0 x 3,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 €: 1 : 100 to: fix : 1020 mm: 300 mm: 1020 mm: 680 mm: 9 mm/s: 5 mm/s: 10 mm/s: 6 mm: 500x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2275 mm: 2082 kgdemo machine / mint conditionnet price (price for new machine € 19.550,00)2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel AND FOOT PEDALTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live ...

pressure:315 tdistance between columns:1800 mmstroke:400 mmDistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1800 x 1000 mmtable height over floor:900 mmdie cushion pressure in table:80 tdie cushion stroke in table:100 mmDie cushion area in table:1300 x 600 mmside window:600 mmram surface:1800 x 1000 mmspeed down:400 mm/sspeed up:300 mm/sworking speed:15 - 80 mm/soil volume:1700 lpower requirement:55,0 kWweight:27,5 tdimensions (WxDxH):3,1 x 2,2 x 4,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic foundation pit:not necessary

pressure:320 tdistance between columns:1530/1370 mmstroke:320 mmdistance table/ram, stroke up:830 mmtable surface area:1500 x 650 mmdie cushion pressure in table:12,5 ttable height over floor:1100 mmside window:570 mmram surface:1240 x 650 mmcapacity of ejector in table:12,5 tspeed down:450 mm/sspeed up:440 mm/sworking speed:63,6 mm/soil volume:2100 lpower requirement:2 x 45,0 kWweight:27,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic drawing cushion in ram:hydraulic ram interlocking:hydraulic Option: NEW electrical controls:Siemens S7-1500 F

: neu : 2024 : 8319 : prompt, Zwischenverkauf v : Türkei : 77982 €: 1326.78 €: 1 : 70200 €: 200 to: 3050 mm: Y1 / Y2 / X und R Achse : 210 mm: 2550 mm: 250 mm: 445 mm: hydraulisch : 100 mm/s: 7 mm/s: 73 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 858 mm: 104 mm: 150 l: 15 kW: 3750 mm: 1390 mm: 2500 mm: 8160 kg4 axes (Y1, Y2, X and R axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC CONTROLLED CROWNING TABLEintermediate clamps for ...

pressure:160 tdistance between columns:1580/1360 mmstroke:320 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:870 mmram surface:1400 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:22,6 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

: neu : ca. 4 Monate ab Auftragse : Italien : 75000 €: 1417.5 €: 150 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 3 mm/s: 2900 mm: 2500 mm: 2500 mm: 5200 kg: horizontal verschiebbar : 2050 mm: 1400 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:160 tdistance between columns:1600/1420 mmstroke:345 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:770 mmram surface:1410 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:23,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

: neu : ca. 4 Monate ab Auftragse : Italien : 160000 €: 3024 €: 300 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 3550 mm: 4000 mm: 2600 mm: 15000 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.800 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.