テーブルの寸法(x-y/mm)2150 x 1200 スライド寸法 X-Y(mm) 2000 x 1200 ストローク(mm)300 スライド調整(mm)200 1分あたりのストローク 5 - 50 横窓寸法(x-y/mm)800
NIDEC ARISA S-2-500-240-120-FD機械式プレスは、2006年にスペインのNid ec Press & Automation Co.(NP&A)によって製造されました。これは、広く定義 れた自動車や機械産業向けの部品の連続生産に使 される非常に多用途なプレスです。これにより、最 も要求の高い金属成形作業、すなわち金属部品の精 なパンチやプレス加工も可能にします。標準的な 途に加え、適切な金型や材料供給システムがあれば 、この機械はトランスファープレスやプログレッシ プレスとしても使用できます。 すべての工程は500トンの高圧力で行われます。NIDEC ARISA S-2-500-240-120-FDプレスの駆動システムは、フライホイ ルと偏心ギアを基にしており、2本のコンロッドと 携しています。この設 ...
ARISA S-2-630-240-120-LD 機械式プレスは、2005年にスペインのArisa S.A.(現Nidec Press & Automation Co.(NP&A))によって製造されました。提供されている機 械は、広く定義された自動車や機械産業で使用され 部品の量産に最適な選択肢です。精密なパンチン やプレス加工など、最も要求の高い金属成形作業も 可能にします。標準的な用途に加え、使用する工具 材料送料システムによっては、転写プレスやプロ レッシブプレスとしても使用可能です。 すべての加工工程は630トンの高圧力で行われます。 動システムはフライホイールと偏心ギアの形をし おり、2本のコンロッドと連携して均一なトルク伝 と滑らかなスライダーの動きを制御します。一方、 スライダー ...
ARISA S-2-400-260-FD機械式プレスは、2000年にスペインのArisa S.A.(現在のNidec Press & Automation Co.(NP&A))によって製造されました。提供されている機 械は、広く定義された自動車や機械産業で使用され 部品の量産に最適な選択肢です。これにより、金 部品の精密なパンチやプレス加工が可能になります 。これらすべての加工工程は最大400トンの高圧迫力 行われ、非常にダイナミックなスライダーと組み わせることで、最高の加工結果が保証されています 。 ARISA S-2-400-260-FDは、開放側壁を持つ頑丈で応力軽減型の ントリー設計を特徴としています。この設計は、高 い剛性、安定したパラメータ、そして高圧負荷の作 でも再現性を維持します。2本のコンロッド ...
Ajax 1,000トンストレートサイドメカニカル鍛造プレス S/N 4410 10インチストローク 33インチシャットハイト 36インチ x 36インチのベッド 毎分80ストローク 部分的に再構築 Ajax 1,000トンストレートサイドメカニカル鍛造プレス S/N 4621 10インチストローク 32インチシャットハイト 36インチ x 32インチベッド 毎分80ストローク ボルスターが付属します。 どちらのプレスも動作状態にあり、電源が入ってい す
中古
Qty. 1 アルミニウムポットおよびディスク製造用中古プレ 機 MFC.:SITI構築:2005専門家によって更新期間:3-4ヶ月 力: 4000トンアルミニウムディスクの生産 & 誘導 & 通常の鍋 ポットの高さ:120 / 140ミリメートル プレス機は、以下に明記されているようにオーバー ールされ、改造され、販売されます。 シリンダーの新しいピストン研削新しいフランジテ ブルの変更 新しいポンプ新しいガスケットなど。 新しい電気お よび電子部品 新しいプログラ
120 € ウォッチリストに追加
• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-47169-118
150 € ウォッチリストに追加
Printing capacity: 8.5 kNTable dimensions: approx. 160 x 120 mmRam diameter: approx. 25 mmReference: Hansmann - Lot 32 Auction-ID: A7-46763-57
990 € ウォッチリストに追加
Manufacturing number: 0485.1184.463Container diameter approx.: 1300 mmReference number: Beeper - Lot 5 Auction-ID: A7-46763-2
The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 toPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mmSLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 500 mm distance between columns (H-frame): 2055 mm passline opening (free passage in side columns): 810 mmDECOILER sheet ...
Press force: 1,200 tRam stroke: 600 mmRam adjustment: 600 mmStroke rate: approx. 9 strokes/minShut height: approx. 1,600 mmDrawing equipment:Drawing cushion force: approx. 225 tDrawing cushion stroke: approx. 200 mmPneumatic ejector in ram:Force: approx. 95 tStroke: approx. 150 mmHeavy-duty mechanical eccentric drawing press in robust double-column design from Schuler, designed for continuous industrial operation in the automotive sector.The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and an additional ram adjustment of 600 mm. The stroke rate is approx. 9 strokes per minute. The shut height is approx. 1,600 mm, allowing the processing of large-scale tools and components.Particularly noteworthy is the large working area with a table size of approx. 4,500 mm as well as a movable / sliding press table, which significantly facilitates setup and tool change an ...
Press force: 1,200 tRam stroke: 600 mmRam adjustment: 500 mmStroke rate: approx. 10 – 16 strokes/minShut height: approx. 1,250 mmDrawing equipment:Drawing cushion force: approx. 240 tDrawing cushion stroke: approx. 250 mmPneumatic ejector in ram:Force: approx. 95 tStroke: approx. 150 mmTable size: approx. 3,500 x 1,900 mmHeavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes.The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application.The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling.A key feature is the movable / sliding pr ...
The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...
The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...
The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...
The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passage in side columns): 1060 ...
The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...
Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)
Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)
Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A
