プレス 中古 販売のため (1,693)

pressure:050 tthroat:250 mmstroke:8 - 120 mmno. of strokes:100 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:650 x 515 mmhole in the table:115 mmtable height over floor:790 - 1020 mmtable adjustable:230 mmram surface:390 x 180 mmram adjustment:70 mmpower requirement:2,0 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,2 moverload protection in ram:mechanical

pressure:200 tdistance between columns:1050 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:1000 x 1200 mmtable height over floor:850 mmside window:500 mmram surface:1050 x 870 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:18 - 36 mm/spower requirement:37,0 kWweight:16,0 tdimensions (WxDxH):4,0 x 3,6 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich

pressure:100 tthroat:315 mmstroke:30 - 160 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:460 mmtable surface area:910 x 680 mmHole in the table:400 mmtable height over floor:800 mmpassage to the back:400 mmram surface:630 x 400 mmram adjustment:80 mmpower requirement:7,5 kWweight:7,5 tdimensions (WxDxH):1,7 x 2,0 x 3,0 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic

pressure:080 tthroat:300 mmstroke:8 - 112 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:467 mmtable surface area:710 x 560 mmhole in the table:240 x 115 mmtable height over floor:800 mmram surface:400 x 315 mmram adjustment:80 mmpower requirement:7,5 kWweight:5,1 tdimensions (WxDxH):1,4 x 1,9 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

pressure: 28.0 tchamfer lenght: 1050 mmdistance between columns: 890 mmthroat: 200 mmstroke: 200 mmdayligth: 325 mmback stop - adjustable: 500 mmworking feed: 8.0 - 10.0 mm/secreturn speed: 35.0 mm/secback stop - adjustable: 0 - 370 mmControl: CYBELEC total power requirement: 4.75 KWweight: 3250 kgrange L-W-H: 1595 x 1390 x 2020 mm Very good / well-maintained condition () new price in 2012 ... approx. 36.000 Euro special price on request The machine was in continuous use in a test areaand as a result has only very few operating hours !- in checked conditions - machinevideo - https://www.youtube.com/watch?v=2LsTlpSaEuEEquipment:- CNC electro-hydraulic press brake- CNC control CYBELEC ModEva 15PAC Large 15 touch display Workpiece creation simply by hand in 2D thanks to the TouchProfile function Intuitive and interactive programming Clearly arranged keyboard Clear and concise menu pages- CN ...

pressure:060 tthroat:220 mmstroke:6 - 94 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:340 mmtable surface area:680 x 400 mmhole in the table:120 x 70 mmtable height over floor:750 mmpassage to the back:290 mmram surface:240 x 240 mmram adjustment:57 mmpower requirement:3,7 kWweight:2,8 tdimensions (WxDxH):1,5 x 1,5 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

pressure:100 tdistance between columns:1180 mmstroke:1 - 120 mmno. of strokes:90 /mindistance table/ram, stroke up:470 mmtable surface area:1100 x 700 mmtable height over floor:800 mmside window:400 mmram surface:740 x 350 mmram adjustment:100 mmpower requirement:37,0 kWweight:11,0 tdimensions (WxDxH):2,3 x 2,0 x 3,5 mknuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich

Pressure:630 tdistance between columns:1600 mmstroke:fix 250 mmno. of strokes:20 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1550 x 1200 mmtable height over floor:800 mmside window:620 mmram surface:1360 x 1200 mmram adjustment:160 mmheight over floor:5,9 mheight beneath floor:0,6 mpower requirement:32,0 kWweight:59,0 tdimensions (WxDxH):3,0 x 2,2 x 6,5 mclutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

: neu : ca. 8 Wochen ab Auftragse : Italien : 77000 €: 1455.3 €: 70 to: 4 mm: 920 mm: 500 mm: 180 mm: 12 - 120 mm: 50 - 80 1/min: 8 : 80 mm: 260 mm: 560 mm: 7.5 kW: 1225 mm: 1865 mm: 3060 mm: 7000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech  ...

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x

: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 €: 205.44 €: 1 : 10700 €: 50 to: horizontal verschiebbar : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 720 kg: 550 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:063 tthroat:280 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:620 x 500 mmhole in the table:230 mmtable height over floor:800 mmram surface:310 x 255 mmram adjustment:63 mmpower requirement:5,5 kWweight:3,95 tdimensions (WxDxH):1,2 x 1,8 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

: neu : ca. 8 Wochen ab Auftragse : Italien : 13500 €: 259.2 €: 70 to: fix : 350 mm: 900 mm: 1050 mm: max. 9 mm/s: 2 kW: 1900 mm: 850 mm: 2250 mm: 1030 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:15 tthroat:250 mmstroke:95 mmno. of strokes:0 - 60 /mindistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:440 x 300 mmhole in the table:45 mmtable height over floor:780 mmtable adjustable:100 mmram surface:100 mmweight:1,1 tdimensions (WxDxH):0,7 x 1,2 x 1,7 m

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 €: 2407.86 €: 220 to: 4050 mm: Y1 / Y2 / X und R Achse : 265 mm: 3600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 12 mm/s: 180 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 5250 mm: 1770 mm: 2900 mm: 15000 kg1 SERVO MOTOR AND PUMP PER CYLINDERStandard accessories:4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportati ...

pressure:5 tthroat:150 mmstroke:40 mmno. of strokes:0 - 80 /mindistance table/ram, max. stroke up, adjustment up:260 mmtable surface area:340 x 270 mmhole in the table:45 mmtable height over floor:780 mmtable adjustable:120 mmram surface:60 mmweight:0,3 tdimensions (WxDxH):0,4 x 0,8 x 1,4 m

Pressure:080 tthroat:300 mmstroke:8 - 100 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:720 x 600 mmhole in the table:300 x 175 mmtable height over floor:860 mmram surface:400 x 270 mmram adjustment:60 mmpower requirement:7,5 kWweight:6,0 tdimensions (WxDxH):1,3 x 2,2 x 3,05 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112813 €: 2132.17 €: 320 to: 3050 mm: Y1 / Y2 / X Achse : 365 mm: 2600 mm: 450 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 154 mm: 250 l: 37 kW: 4300 mm: 1820 mm: 3330 mm: 17100 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning t ...

pressure:160 tdistance between columns:1380 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1250 x 850 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:150 mmdie cushion area:450 x 450 mmtable height over floor:900 mmside window:250 x 400 mmram surface:1350 x 850 mmspeed down:400 mm/sspeed up:350 mm/sworking speed:50 mm/soil volume:1850 lpower requirement:58,0 + 11,0 kWweight:24,1 tdimensions (WxDxH):2,85 x 2,15 x 4,6 mGerman Safety: permitted for manual loading:CE-sign die cushion / ejector in table:hydraulic depth stop:motoric adjustable

pressure:075 tthroat:230 mmstroke:6 - 100 mmno. of strokes:105 /mindistance table/ram, max. stroke up, adjustment up:354 mmtable surface area:700 x 420 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:310 mmram surface:264 x 270 mmram adjustment:60 mmpower requirement:5,5 kWweight:3,6 tdimensions (WxDxH):1,2 x 1,6 x 2,3 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1

pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:330 mmtable height over floor:820 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,3 tdimensions (WxDxH):1,6 x 2,2 x 2,9 m

pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:350 mmtable height over floor:800 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,1 tdimensions (WxDxH):1,5 x 2,1 x 2,9 m

pressure:40 tdistance between columns:495 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:490 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:155 mmram surface:150 mmspeed down:480 mm/sspeed up:480 mm/sworking speed:20 mm/soil volume:115 lpower requirement:7,5 kWweight:2,2 tdimensions (WxDxH):1,35 x 1,1 x 2,2 mdepth stop:mechanisch foundation pit:nicht erforderlich

Pressure:200 tdistance between columns:1910 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1900 x 1150 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:300 mmdie cushion area:1500 x 950 mmtable height over floor:800 mmside window:1000 mmram surface:1900 x 1100 mmreturn capacity:36 tspeed down:400 mm/sspeed up:170 mm/sworking speed:30,5 mm/soil volume:1500 lheight over floor:4,85 mheight beneath floor:2,6 mpower requirement:45,0 kWweight:38,0 tdimensions (WxDxH):3,05 x 2,8 x 5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 €: 1857.87 €: 135 to: 3050 mm: Y1 / Y2 / X und R Achse : 265 mm: 2600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 200 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 2x4 kW: 4200 mm: 1680 mm: 2750 mm: 9500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows ...

pressure:300 tdistance between columns:1220 mmstroke:1000 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1200 x 1000 mmpressure of drawing cushion in table:115 tstroke of drawing cushion in table:400 mmdie cushion area:1100 x 860 mmtable height over floor:900 mmside window:550 x 1000 mmram surface:1200 x 1030 mmspeed down:400 mm/sspeed up:350 mm/sworking speed:12 - 31 mm/soil volume:1080 lpower requirement:36,0 + 19,0 kWweight:22,0 tdimensions (WxDxH):2,5 x 2,5 x 6,3 mheight over floor:5,4 mheight beneath floor:0,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick hydraulic safety block and pump:Fabrikat Rexroth

pressure:100 tthroat:375 mmstroke:20 - 125 mmno. of strokes:30 - 80 /mindistance table/ram, max. stroke up, adjustment up:515 mmtable surface area:900 x 635 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:570 mmram surface:700 x 450 mmram adjustment:80 mmpower requirement:15,0 kWweight:8,0 tdimensions (WxDxH):1,5 x 2,4 x 3,5 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic