プレス 中古 販売のため (1,701)

: gebraucht : 2023 : 070029 : prompt, Zwischenverkauf v : Türkei : 19600 €: 1 : 150 to: fix : 1520 mm: 300 mm: 1520 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 10 mm: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2450 mm: 3270 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel and foot pedalHeight adjustable tableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 €: 2324.7 €: 170 to: 500 mm: 1200x700 mm: 600 mm: 110 mm/s: 7 mm/s: 70 mm/s: 19 kW: 2700 mm: 1600 mm: 2650 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:63 tthroat:350 mmstroke:400 mmdayligth:650 mmtotal power requirement:8 kWweight of the machine ca.:4 tdimensions of the machine ca.:3 x 1,9 x 2,7 m

pressure:60 tthroat:400 mmstroke:600 mmDistance table/ram, stroke up:700 mmTable surface area:1120 x 700 mmtable height over floor:850 mmRam surface:700 x 700 mmOil volume:275 lPower capacity:7,5 kWWeight:7,3 tDimensions (WxDxH):1,6 x 2,0 x 3,7 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

pressure:500 tstroke:fix 300 mmno. of strokes:20 - 70 Hub/mindistance between columns:3100 mmside window:1400 mmdistance table/ram, max. stroke up, adjustment up:1000 mmTable area:2800 x 1600 mmram surface:2800 x 1450 mmram adjustment:100 mmpower requirement:90,0 kWweight:100,0 tDimensions (WxDxH):5,75 x 3,2 x 7,8 mheight above floor:6,4 mheight beneath floor:1,4 mclutch:pneumatic; Ortlinghaus ram adjustment:motoric overload protection in ram:hydraulic ram counterbalance:pneumatic

pressure:063 tthroat:250 mmstroke:8 - 100 mmStroke rate:60 - 160 / minDistance table/ram, max. stroke up, adjustment up:415 mmTable surface area:710 x 500 mmHole in the table:250 / 280 mmTable height above floor:800 mmPassage to the back:290 mmRam surface:450 x 280 mmRam adjustment:63 mmWeight:4,3 tDimensions (WxDxH):1,5 x 1,7 x 2,7 minfinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical

pressure:063 tthroat:250 mmstroke:8 - 100 mmStroke rate:47 - 140 / minDistance table/ram, max. stroke up, adjustment up:415 mmTable surface area:710 x 480 mmHole in the table:280 / 250 mmTable height above floor:800 mmPassage to the back:290 mmRam surface:450 x 280 mmRam adjustment:63 mmWeight:4,0 tDimensions (WxDxH):1,5 x 1,6 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical

pressure:63 tthroat:270 mmstroke:160 mmDistance table/ram, max. stroke up, adjustment up:360 mmtable surface area:560 x 490 mmhole in the table:280 x 190 mmtable height above floor:850 mmram surface:450 x 360 mmoil volume:360 lpower requirement:23,0 kWweight:4,6 tdimensions (W x D x H):1,2 x 1,8 x 2,9 m

pressure:70 tdistance between columns:750 mmstroke:900 mmtable surface area:700 x 1000 mmDistance table/ram, stroke up:900 mmtable height over floor:680 mmram surface:700 x 1000 mmside window:600 mmmax. tool weight:5,0 tmax. capacity of swivelling ram plate:2,0 tSpeed down:0 - 50 mm/sSpeed up:0 - 48 mm/sWorking speed:0 - 8 mm/soil volume:140 lpower capacity:9,5 kWweight:8,0 tDimensions (WxDxH):2,2 x 1,2 x 3,7 m

pressure:40 tthroat:285 mmstroke:500 mmDistance table/ram, stroke up:630 mmtable surface area:560 x 560 mmpressure of drawing cushion in table:16 tstroke of drawing cushion in table:200 mmdie cushion area:425 x 425 mmtable height over floor:800 mmram surface:450 x 450 mmpower requirement:11,0 kWweight:4,0 tdimensions (WxDxH):1,15 x 1,8 x 2,85 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 light guard:Sick

pressure:30 tthroat:110 mmstroke:50 mmno. of strokes:35 - 80 /mindistance table/ram, max. stroke up, adjustment up:230 mmtable surface area:410 x 260 mmtable height over floor:790 mmpassage to the back:170 mmram surface:190 mmram adjustment:35 mmweight:1,3 tdimensions (WxDxH):1,0 x 1,1 x 1,8 mGerman Safety: moving screen:UVV 11.062 - VBG 7n5.1 § 6

pressure:160 tdistance between columns:1360 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:620 mmtable surface area:1300 x 900 mmtable height over floor:950 mmside window:640 mmram surface:1300 x 900 mmpower requirement:45,0 kWweight:16,0 tDimensions (WxDxH):2,5 x 2,1 x 4,1 mcutting impact cushioning:hydraulic

pressure:600 tdistance between columns:3640 mmstroke:350 mmno. of strokes:11 - 44 /minDistance table/ram, max. stroke up, adjustment up:1550 mmtable surface area:3600 x 2500 mmsliding table:3600 x 2500 mmram surface:3600 x 2500 mmSide window:2200 mmram adjustment:400 mmmaterial width coil line:500 - 1950 mmMaterial thickness at 1200 mm material width:0,6 - 2,5 mmMaterial thickness at 1850 mm material width:0,6 - 2,0 mmMaterial thickness at 1950 mm material width:0,6 - 1,75 mmCoil weight:35,0 tcoil internal diameter:610 mmcoil external diameter:900 - 1900 mmno. of straightening rolls:13 straightening roll diameter:50 mmStack height:400 mmstacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mmstations:2 power requirement:112,0 + 35,0 kWWeight:390,0 tDimensions (WxDxH):7,3 x 5,1 x 15,0 mHeight above floor:9,1 mHeight below floor:5,9 mclutch-/ brake combination:pneumatic overload pr ...

pressure:315 tdistance between columns:1290 mmstroke:700 mmdistance table/ram, max. stroke up, adjustment up:950 mmtable surface area:1250 x 1100 mmpressure of drawing cushion in table:125 tstroke of drawing cushion in table:300 mmdie cushion area:900 x 900 mmCapacity of ejector in ram:20 tStroke of ejector in ram:250 mmtable height over floor:800 mmram surface:1250 x 1100 mmoil volume:1200 lpower requirement:40,0 kWweight:22,0 tdimensions (WxDxH):2,6 x 1,6 x 5,2 mheight over floor:4,05 mdrawing cushion in table:hydraulic ejector in ram:hydraulic cutting impact cushioning:hydraulic

Pressure:40 tthroat:330 mmstroke:250 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:800 x 500 mmhole in the table:100 mmtable height over floor:900 mmram surface:100 mmSpeed down:406 mm/sSpeed up:393 mm/sWorking speed:14 mm/soil volume:350 lpower requirement:7,5 kWweight:4,6 tdimensions (WxDxH):1,3 x 2,3 x 3,4 mGerman Safety: permitted for manual loading:CE-sign depth stop:mechanical

pressure:40 tthroat:300 mmstroke:630 mmDistance table/ram, stroke up:900 mmTable surface area:620 x 520 mmHole in the table:150 mmtable height over floor:600 mmRam surface:150 mmPower capacity:15,0 kWWeight:4,5 tDimensions (WxDxH):1,0 x 1,9 x 3,0 mGerman Safety: permitted for manual loading:CE-sign

pressure:400 tdistance between columns:1060 mmstroke:450 mmno. of strokes:15 - 30 /mindistance table/ram, max. stroke up, adjustment up:1160 mmtable surface area:1000 x 700 mmcapacity of ejector in table:2 x 16 tejector stroke of ejector in table:125 mmDie cushion pressure in table:120 tDie cushion stroke in table:2 mmcapacity of ejector in ram:2 x 4 tstroke of ejector in ram:100 mmram surface:1000 x 700 mmcolumn travel -side:630 mmpower capacity:55,0 kWweight:50,0 tdie cushion in table:2. station

no. of strokes:150 /minimpact energy:420 kJdistance lower die block / ram gudeway:435 mmThroat:425 mmsteel forging - rectangular up to:110 mmsteel forging - diameter up to:125 mmpower requirement:22,0 kWweight of hammer:3,9 tweight of anvil:3,0 tram hammer weight:200 kgweight:6,9 tdimensions (WxDxH):1,1 x 2,3 x 2,4 m

Pressure:080 tthroat:345 mmstroke:20 - 160 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:495 mmtable surface area:920 x 610 mmtable height over floor:800 mmHole in the table:280 mmpassage to the back:670 mmram surface:650 x 400 mmram adjustment:50 mmpower capacity:10,0 kWweight:7,7 tDimensions (WxDxH):1,5 x 2,2 x 3,15 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulic ram adjustment:motoric

pressure:800 tdistance between columns:1050 mmstroke:200 mmno. of strokes:8 - 25 /mindistance table/ram, max. stroke up, adjustment up:1300 mmSide window:550 mmtable surface area:1030 x 900 mmCapacity of ejector in table:15 tStroke of ejector in table:85 mmram surface:1040 x 800 mmram adjustment:120 mmCapacity of ejector in ram:12 tejector stroke in ram :80 mmpower requirement:36,0 - 112,6 kWweight:65,0 tDimensions (WxDxH):3,0 x 3,1 x 6,07 mejector in table:hydraulic ejector in ram:hydraulic

pressure:315 tdistance between columns:2350 mmdistance table/ram, max. stroke up, adjustment up:1200 mmdistance between cutting impact cushioning:1600 mmDistance table/ram, stroke up:1200 mmstroke:800 mmtable surface area:2060 x 1260 mmtable height over floor:750 mmDie cushion pressure in table:100 tDie cushion stroke in table:400 mmdie cushion area:1250 x 1000 mmside window:780 mmram surface:2200 x 1500 mmCapacity of ejector in ram:63 tspeed down:500 mm/sspeed up:310 / 410 mm/sworking speed:20 - 73 mm/squantity of oil:3900 lpower requirement:80,0 + 45,0 kWweight:55,0 tDimensions (WxDxH):4,6 x 2,7 x 7,2 mHeight above floor:6,0 mHeight below floor:1,2 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:hydraulic cutting impact absorption:hydraulic

pressure:160 tthroat:450 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:580 mmtable surface area:1000 x 1000 mmdie cushion capacity:20 tdie cushion stroke:300 mmram surface:700 x 750 mmfeed down:400 mm/sfeed up:400 mm/stable height over floor:1350 mmdie cushion area:Ø 350 mmpower capacity:55 + 11 kWweight:19,5 tDimensions (WxDxH):1,5 x 3,5 x 4,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch depth stop:mechanisch

: neu : ca. 4 Monate ab Auftragse : Italien : 38200 €: 729.62 €: 70 to: 500 mm: 700x350 mm: 700x500 mm: 500 mm: 250 mm: 24 mm/s: 5 mm/s: 4 kW: 1500 mm: 1000 mm: 2500 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on  ...

pressure:250 ttable length:4000 mmtable width:3000 mmControls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 toPRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mmRAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kgRAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 toTOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage ...

pressure:800 tdistance between columns:2900 mmstroke:350 mmControls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 toPRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mmRAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):256 ...

pressure:063 tthroat:250 mmstroke:8 - 100 mmno. of strokes:56 / 84 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:710 x 500 mmhole in the table:320 mmtable height over floor:800 mmpassage to the back:320 mmram surface:450 x 280 mmram adjustment:63 mmweight:4,1 tdimensions (W x D x H):1,35 x 2,0 x 2,6 moverload protection in ram:mechanical

pressure:200 tdistance between columns:2100 mmstroke:550 mmDistance table/ram, stroke up:1800 mmtable surface area:2000 x 2800 mmtable height over floor:760 mmram surface:2000 x 2000 mmSide window:2000 mmfeed down:400 mm/spower requirement:51,0 kWweight:33,0 tdimensions (WxDxH):3,25 x 3,5 x 5,4 mHeight above floor:5,4 mfoundation pit:not necessary

pressure:200 tdistance between columns:2100 mmstroke:550 mmDistance table/ram, stroke up:1800 mmtable surface area:2000 x 2800 mmtable height over floor:760 mmram surface:2000 x 2000 mmSide window:2000 mmfeed down:400 mm/spower requirement:52,0 kWweight:33,0 tDimensions (WxDxH):3,25 x 3,5 x 5,4 mHeight above floor:5,4 mfoundation pit:not necessary

pressure:400 tdistance between columns:3250 mmdistance table/ram, max. stroke up, adjustment up:1000 mmstroke:800 mmtable surface area:3250 x 1400 mmtable height over floor:1250 mmdie cushion capacity:170 tdie cushion stroke:200 mmdie cushion area:1800 x 1000 mmdistance between cutting impact cushioning:2610 mmside window:800 mmram surface:3250 x 1400 mmreturn capacity:51 tspeed down:300 mm/sspeed up:300 mm/sworking speed:16 - 33 mm/squantity of oil:2900 lpower requirement:100,0 kWweight:70,0 tDimensions (WxDxH):4,9 x 3,1 x 7,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

pressure:400 tdistance between columns:1250 mmstroke:250 fix mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:825 mmtable surface area:1000 x 900 mmcolumn travel -side:400 x 700 mmram surface:1000 x 900 mmram adjustment:100 mmcapacity of ejector in table:40 tejector stroke:160 mmpower capacity:270,0 kWweight:44,0 tDimensions (WxDxH):2,4 x 3,6 x 7,2 mheight over floor:6,4 m