Fabricant:
(Catégorie: 107)
sheet width: 2520 mmplate thickness: 3.0 mm: 350 mmSwing beam adjustment: 80.0 mmback stop - adjustable: ca. 1.000 mmControl: FM 5.1 B upper clamping bar adjustment: 20.0 mm/sekbending speed: 37.0 Grad/sektotal power requirement: 4.5 kWweight: ca. 3.250 kgThe ideal solution for individual and series production.A modern design with particularly high rigidity.Designed for continuous performance.Features:- Dynamic, powerful electro-motorized folding machine Upper beam bending beam drive by geared brake motor Bending beam drive with roller bearings- FASTI CNC control TOUCH - FM 5.1 B Swiveling control unit, front right 11.3 color LCD touch screen display Manual / automatic mode selectable Input of actual/target values possible (X axis / angle etc.) Program memory Tool memory- CNC electro-motorized back gauge with rear sheet support surface- CNC electro-motorized folding beam adjustment- 1x e ...
Épaisseur de la plaque : 4 mm, longueur de la plaque : 200 mm, puissance totale requise : 3 kW, poids de la machine, environ : 550 kg, dimensions de la machine, environ : 1,0 x 0,8 x 1,0 m. Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Largeur de la feuille : 1250 mm Épaisseur de la plaque : 4,00 mm Distance entre les colonnes : mm Besoins totaux en puissance : kPoids de la machine environ : 2,80 tDimensions de la machine environ : mEndomètre alimentéButée latérale et rallonges de tableLimitation de longueur de coupeÉclairage de la ligne de coupeBarrière lumineuse pour la protection de la zone arrièreLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Largeur de la feuille : 1040 mm Épaisseur de la plaque : 4,00 mm Distance entre les colonnes : mm Puissance totale requise : kW de la machine environ : 1,70 t Dimensions de la machine environ : m Calibre arrière manuel jusqu’à 550 mm Écartement latéral et rallonges de table Lames affûtées Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
: 3050 mm: 06,0 mm: -: 0,5-3,0 °: 1000 mmtable height: 770 mmwork height max.: 0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mmsheet thickness - max.: 6 mmconnected load: 7,5 kW: . with crowbar: . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 0300 mmmaterial thickness: 2,50 mmno. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mmstraightening speed: 5 - 30 mm/minsheet thickness - min.: 0,40 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFeatures:• All upper rollers manually adjustable• All lower rollers interconnected via gears• Speed manually adjustable via handwheel• Strip guide at the infeed• Roller basket at the outfeed• Sensor arm for loop controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 8000 mmworking width: 3500 mmPower: 300 APlasma source: Nertajet type: HP 300 CNCburner heads: 1 1 head Plasma1 head AutoganThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2520 mmplate thickness: 2.5 mmbending angle max.: 135 °stroke of upper beam: 250 mmadjustment: UW 80.0 mmback stop - adjustable: ca. 925 mmwork height max.: ca. 935 mmtotal power requirement: 6.0 kWweight of the machine ca.: 2500 kg.dimensions of the machine ca.: 3600 x 1650 x 1425 mm good condition () with 1x split set of goat foot toolsEquipment:- dynamic, powerful motorized folding machine- SCHRáDER NC control unit POS 800 with LCD display Fast programming of individual parts- Control panel, front right- NC electro-motorized back gauge with rear sheet support surface- Manual lower beam adjustment- 1x free-moving double foot switch- 1x extra bending machine .. B = 10.0 mm built-in bending rail with .. B = 25.0 mm- 1x split set of goat foot tools ... H = 130 mm a pointed rail is installed- Operating instructionsThe data for this ad was created with ModulMWS - the software ...
sheet width: 2520 mmplate thickness: 3.2 mm STcutting thickness max.: 5.0 mm ALcutting thickness max.: 1.5 mm VAno. of strokes: 34 Hub/mincutting angle: 1° 20 Gradback stop - adjustable: max. 1.000 mmwork height max.: 800 mmtotal power requirement: 7.5 kWweight of the machine ca.: 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition ()Furnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- ESTUN NC digital display - type E10-S- electro-motorized back gauge, adjustment via electric. Button- 1x hold-down bar- manual cutting gap adjustment- rear protective device (side protective grilles)- Selector switch for single and continuous stroke- 1x front side stop- 2x front support arms- 1x freely movable foot switch- original instruction manualThe da ...
sheet width: 1050 mmplate thickness: 4.0 mmthickness at Niro-steel: 3.0 mmdistance between columns: 1200 mmblade length: 1150 mmno. of strokes: 46 - 69 Hub/mincutting angle: 1.30 °Control: konv. oil volume: 100 ltr.total power requirement: 5.68 kWweight: 1100 kg From a maintenance workshop In good condition ()Features:- Robust electro-hydraulic sheet metal shear- Electric motor-driven backgauge Backlash-free ball screw for backgauge Travel speed 100 mm/sec- Electric cutting length limiter Cutting length limiter to increase the stroke rate per minute- Manual cutting gap adjustment (lateral adjustment)- Front support table with recessed grips- Front finger/interference guard- 1x side stop with T-slot and millimeter scale- 2x front support arms- 1x freely movable foot switch- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tchamfer lenght: 1500 mmdistance between columns: 1220 mmControl: Cybelec DNC 1200 closing speed: 95 mm/minworking feed: 1-10 mm/secwork stroke: 156 mmoverrun time: 59 mstracking travel: 6 mmthroat: 200 mmdistance table - lower edge of ram: 301 mmtable width: 160 mmtable height: 850 mmx-axis: 550 mmtravel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St.weight: ca. 3600 kgdimensions: mma lot of lower and upper toolsincl. work lightnew control in 2003: Cybelec DNC 1200The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2550 mm: 4 mmsheet thickness for stainless steel: 2 mmrear stop: 750 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3050 kgdimensions: 3300 x 2230 x 1360 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityYoutube video link:https://www.youtube.com/watch?v=pCuKwtBIQto&ab_channel=BaestleinG mbHThe data f ...
sheet width: 2040 mm: 4 mmsheet thickness for stainless steel: 2 mmtotal power requirement: 7,5 kWrear stop: 750 mmweight of the machine ca.: 2600 kgdimensions: 2810 x 2230 x 1360 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largeur de la feuille : 4050 mm, épaisseur de la plaque : 8 mm, distance entre les colonnes : mm, puissance totale requise : kWpoids de la machine, environ : tDimensions de la machine, environ : mLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Largeur de la feuille - max. : 0280 mmboil Poids : 1,00 tboil Diamètre interne : 290 - 570 mmboil extérieur - diamètre environ : 1000 mm0 : 42 U/min Puissance totale requise : 1,10 kWweight de la machine environ : dimensions de la machine environ : 1,30 x 1,00 x 1,45 m Unité de contrôle manquante Frein mécanique provisoirement connecté Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Heures de travail laser allumé : 50921 h Heures de travail Faisceau allumé : 21717 h Puissance du laser : 3200 Watts Plage de travail laser : 4000 x 2000 x 115 mm Acier max. : 20 mm Max. Acier inoxydable : 12 mm Max. Aluminium : 8 mm Longueur : 11600 mm Largeur : 5300 mm Hauteur : 2200 mm Poids de la machine : 16000 kg Charge électrique connectée : 73 kVA
Heures de travail machine : 23304 h Heures de travail Laser sur : 22804 h Heures de travail Faisceau allumé : 10185 h Puissance du laser : 4400 Watts Plage de travail laser : 3000 x 1500 mm Acier : 25 mm Max Acier inoxydable : 20 mm Maximum Aluminium : 12 mm Longueur : 12800 mm Largeur : 6300 mm Hauteur : 2400 mm Poids de la machine : 15000 kg Charge électrique connectée : 51 kVA
Résistance de la bobine du dérouleur : 2 x 2 tonnes Largeur du matériau : 380 - 500 mm Cylindre extérieur : 1,300 - 1,400 mm Plage d’expansion : 445 - 530 mm Niveleur / lisseur Largeur du matériau : 40 - 500 mm Nombre de rouleaux de nivellement : 7 pièces. Diamètre des rouleaux de nivellement : 60 mm Nombre de rouleaux de pincement : 2 pièces. Diamètre des rouleaux à dessin : 60 mm Nombre de rouleaux à extraire : 2 pièces. Diamètre des rouleaux de démontage : 60 mm Épaisseur du matériau : 0,4 - 1,6 mm Section transversale : 800 mm carrés Vitesse d’alimentation : 0 - 30 m/min Puissance requise : 3 kW
Poids de la bobine : 500 kg Largeur du matériau : 41 mm Diamètre extérieur de la bobine : 1 000 mm Plage d’expansion : 250 - 500 mm Vitesse : 20 m / min Puissance requise : 0,5 kW Dimensions L x Largeur x Hauteur : 1 000 x 850 x 1,700 mm Poids de la machine environ : 200 kg
sheet width: 3100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 12 - 50 Hub/minback stop - adjustable: 1000 mmControl: DELEM DAC 360 oil volume: 120 ltr.engine output: 9.5 kWweight: 7000 kg.range L-W-H: 3950 x 1950 x 1680 mm well-maintained condition () equipped with new DELEM control unitEquipment:- electro-hydraulic, guided plate shear- DELEM CNC control unit type DAC 360 front control panel, swiveling front left- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- electro-motorized backgauge, with ball screws- 1x extra-long side fence with T-slot mm scaleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Épaisseur de la plaque : 3 mm, angle ajustable de - à : 30 - 120 Hauteur gradable : 900 mm Poids : environ 800 kg Capacité de coupe : 3 mm St40 à 150 x 150 mm, acier inoxydable de 2 mm, angle de coupe réglable en continu de 30 à 120, serrage pneumatique pour l’ajustement de l’angle (système Boschert), machine en bon état. Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Épaisseur de la plaque : max. 3 mm de distance avant la plaque. Rouleaux : 125 mm Gorge : max. 500 mm Poids : environ 500 kgÉpaisseur du matériau à 40 kg/mm² Résistance à la traction : max. 3 mmLargeur de travail : 500 mmProfondeur de travail : 450 mmRéglage manuel du rouleau supérieurDistance centrale du rouleau : 125 mmVitesse de travail variable en continu : 3–15 m/minJupe d’arrêt1 jeu de rouleauxFonctionnement avant/arrière via un interrupteur à piedLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kWOverall size: ca. 400 x 1100 x 1250 mmdeburring machine / free belt frinding machineabrasive belt with widt from 12-50 mm with vertical working positionhead inclination up to 45° both wayseasy bending of the belt allows to follow the shapecutting speed 24m / secbig tabel surface with ball rollingwith self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/hcomes with a huge bunch of belts!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 - 8.0 mmdown holder: 13 Stückdistance between columns: 3070 mmcutting angle: 1.0 - 4.0 °no. of strokes: ~ 22 Hub/minControl: ELGO P8511 oil volume: 240 lvoltage: 400 Vtotal power requirement: 15.0 kWweight: 8000 kgrange L-W-H: 3550 x 2350 x 1900 mm good condition () from a maintenance workshopEquipment:- NC electro-hydraulic guillotine shears- heavy / stable welded construction (machine body)- NC ELGO digital control unit P8511- NC electro-motorized backgauge on ball screws- electro-hydraulic cutting angle adjustment Front analog cutting angle display- 1x stable side fence, with T-slot and mm scale- 3x stable support arms, with T-slot and mm scale- Ball castors in the work table incl. recessed grips- Front finger guard - can be folded up at the front- 1x freely movable foot switch- 2x front emergency stop button- ...
: 400 kNstroke length max.: 285 mmworking feed: 9 mm/secreturn speed: 20 mm/sec: 660x1250 mmwork height max.: 930 mmtoolpiece height max.: 250 mmtotal power requirement: 4 kW: 200x26 mmbending capacity max. - round: 60x5,0 mmDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400 Vweight: 395 kgOverall size: 900x600x1100 mmEquipment / Accessories:- Two driven rollers- Manual delivery of the upper roller- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turndifferent profiles are usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bending speed: 2.1 m/minBending capacity - square: 30x30 mmbending capacity - flat iron: 80x15 mmBending capacity - flat iron on edge: 50x10 mmtube diameter: 1 oder 60x2 mmShaft diameter - upper: 35 mmShaft diameter - lower: 30 mmtotal power requirement: 0,75 kwrange L-W-H: 650 x 500 x 1300 mmweight: 170 kgStandard features:- hardened special steel shafts- a set of hardened rollers- Bottom rollers are driven- lateral straightening rollers- Foot pedal- horizontal and vertical workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 4412956673057 : 95 to. ca. engine output: 7,5 kWweight of the machine ca.: ca 5 tdimensions of the machine ca.: 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largeur de la feuille : 2040 mm Épaisseur de la plaque : 4,0 mm Distance entre colonnes : 2100 mm Diamètre du rouleau : 150 mm Puissance totale requise : 7,0 kW Poids de la machine environ : 2,2 Dimensions de la machine environ : 2,95 x 1,0 x 1,75 mm Plieuse de tôle avec 3 rouleaux - 2 rouleaux entraînés - Rouleau arrière électriquement réglable - Pliage conique - Interrupteur au pied - Dispositif d’arrêt d’urgence Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
