Key data: 2000 mm, 8 mm, 6 mm
FACCIN DE LA PLIEUSE DE PLAQUES - HYDRAULIQUE À 4 ROULEAUX 2000 X 8 MM MODÈLE 2020B4 Année 2020 Capacité 2000x8 mm Guides linéaires hydrauliques à rouleau de plaques Machine en excellent état de fonctionnement Capacité de flexion -Largeur de la plaque : 2000 mm -Épaisseur de la plaque de roulement 8 mm - Épaisseur de pré-courbure : 6 mm Dimensions des rouleaux : -Longueur utile 2050 mm -Rouleau supérieur 200 mm -Roulis inférieur 180 mm -Rouleaux latéraux 160 mm Moteur électrique 5,5 kW Vac 400/50 • Durcissement de la surface haute résistance des 4 rouleaux • Rouleaux centraux entraînés par des moteurs hydrauliques et des engrenages • Pliage conique, fixation des rouleaux latéraux inclinables pour former des cônes • Ouverture de l’extrémité avant hydraulique pour dé ...
Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details.
Données techniques du calendrier de plaques hydrauliques Faccin HAV 3162 utilisé : Diamètre du rouleau supérieur: 620 mm Diamètre des rouleaux latéraux: 550 mm Dimensions de la machine: 8600 x 3500 x 3700 (h) mm Poids: 90.000 kg
Caractéristiques techniques de la grille hydraulique pour feuilles à 3 rouleaux Faccin HAV 3172 utilisées: Diamètre du rouleau supérieur: 720 mm Diamètre des rouleaux latéraux: 650 mm Alimentation: 380V - 50Hz Dimensions de la machine: 8600 x 3500 x 3700 (h) mm Poids: 90.000 kg
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CINTREUSE DE PLAQUES FACCIN - 4 ROULEAUX HYDRAULIQUES 3000 X 40 MM - MODÈLE 4HCI3-35/30 ANNÉE 1990 /2025 ROULEAU DE CINTRAGE DE PLAQUE GUIDAGES LINÉAIRES DOUBLE PINCEMENT PRÉ-PLIAGE Machine en bon état de fonctionnement Capacité de pliage -Largeur de la plaque : 3000 mm -Epaisseur de la plaque de roulement 40 mm - Epaisseur de la préplide 35 mm Dimensions des rouleaux : -Longueur utile 3050 mm -rouleaux centraux supérieur/inférieur D 470 mm -rouleaux latéraux gauche/droite D 420 mm • Durcissement de la surface à haute résistance des 4 rouleaux • 3 rouleaux entraînés par un réducteur avec moteur hydraulique • Accessoire de pliage conique : rouleaux latéraux inclinables pour former des cônes, type rouleau à tampon contrasté. • Ouverture de l’extrémité ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 8 mm : 8 mm : 4.9 mm : 6 mm : 6 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 25 mm : 25 mm : 16 mm : 20 mm : 18 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 28 mm : 28 mm : 22 mm : 26 mm : 23 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 16 mm : 16 mm : 10 mm : 13 mm : 11 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
Offre 26165 Données techniques - Deux rouleaux entraînés, chacun réglable hydrauliquement - Pour la flexion et le roulement conique - Fonctionnement d’un panneau de contrôle séparé, avec affichage numérique de la valeur réelle - et l’opération manuelle - Largeur de travail maximale 1300 mm - Épaisseur maximale de la feuille à 400 N/mm² sans courbure - Avec un diamètre de flexion de 370 mm, 30 mm à l’intérieur - Avec un courbure au diamètre de 370 mm, intérieur 25 mm - sans courbure avec un diamètre de flexion de 380 mm à l’intérieur et - Largeur de 370 mm 45 mm - Diamètre des rouleaux supérieurs de 300 mm chacun - Diamètre du rouleau latéral de 310 mm chacun - Vitesse de travail : 4,5 m/min - Transmission 400 V / 30 kW - Espace requis F 5800 x H 1900 x D 2200 mm - Poids : 8500 kg
plate width: 3200 mm plate thickness: 83 mm pre-bending: 72 mm roll diam. toproll: 700 mm roll diam. bottom roll: 650 mm side roll diameter: 550 mm distance between columns: 3300 mm roll drive: 93,2 kW turning speeds: 2 - 4 m/min total power requirement: - kW weight of the machine ca.: 78 t dimensions of the machine ca.: 9 x 3,3 x 3,4 m 4 –Roll Bending Machine - 4 roll Pinch bending - Pre-bending - Tilting function -- Hydraulic front bearing tilting speed: 450mm/min -- Hydraulic tilting of top roll: 250mm/min - CE 2 Units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
