Fabricant:
(Catégorie: 105)
saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,5 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 1000 x 950 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmControl: total power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,1 x 0,95 x 1,7 mNew machines SPECIAL PRICE includes:- Starter Kit 2- Micro-spraying systemReady for demonstration in our showroomRoller conveyors optionalHydropneumatic fully automatic· Miter Left/Right· Bevel head cuts up to 45° (shifter) a. b.· Pneumatic vertical clamping device· Vice before and after the saw blade for low-burr cuts· Material hold-down roller· Integrated coolant spray device· Swarf suction nozzle on the saw blade protective hood· Single feed 530 mm· Section length min. 4 mm max. 9,999 mmFor profile cuts, the use of our B & S Coolmatic ...
cutting diameter: 15 - 560 mm: 560 x 630 mmdimensions of saw-band: 7.400 x 54 x 1,60 mmControl: KASTO material feed - single: 900 mmmultiple feeding length: max. 9.999 mmcutting length min.: 6,00 mmsawing motor: 5,50 kWcutting speed: 13 - 127 m/minheight of material-table: 700 mmtotal power requirement: 12,00 kWweight of the machine ca.: 6,00 tdimensions of the machine ca.: 3,70 x 2,50 x H2,50 mAutomatic two-column band saw with KASTO Compact Control,frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1mand outfeed roller 2m, Machine can be inspected under power.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diamètre du rouleau : 300 mmGorge : 450 mm Hauteur de la table : 480 mm Longueur du corps de scie : 3350 mmLargeur du ruban de scie : 10 mmPuissance totale requise : 2,2 kWPoids de la machine env. : 520 KgDimensions de la machine env. : 1,00 x 0,70 x 1,85 mScie pour les parties du corps en tôle, plastique, etc.Bonne accessibilité de la lame de scie, guidée à main levée. Vitesse de coupe réglable en continu jusqu’à 1000 m/minAppareil de soudage de ruban IDEAL BS00Les données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Plage de coupe ronde : 170 mm Zone de coupe rectangulaire : 170 x 170 mm Dimensions de la lame de scie : 3000 x 25 x 0,9 mm Vitesse de la bande : 150, 355 et 95 m/min Entraînement de la scie : 380 V, 0,75 kW kW Espace requis : 1400 x 600 x 800 mm Poids : 340 kg
Au total, sept scies circulaires à métaux de Kaltenbach et de l’Adige sont disponibles. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. Une inspection sur place est possible.
diamètre du rouleau : - mmgorge : - mmhauteur de la pièce : - mmpuissance totale requise : - kWpoids de la machine env. : - tdimensions de la machine env. : - mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Hydr.- Onglet à deux colonnes - Scie à ruban pour métaux Spécifications: - Plage de coupe à 90 Rond 360 mm - Rectangle 600 x 360 mm - Plage de coupe à 45 ronds 320 mm - Réglage de l’onglet par volant - Dimensions de la lame de scie 5400 x 38 x 1,3 mm - Vitesse incisionnelle. Variable en continu 19 - 130 m/min - Pression de coupe réglable en continu 0 - 10 m/min -Un. Serrage du matériau - Présélection de la hauteur de levage de la lame de scie - Dispositif de refroidissement par micro-pulvérisation - Puissance d’entraînement totale 400 V / 8 kW - Encombrement approximatif L 1800 x H 2000 x P 3250 mm - Poids env. 2200 kg - Convoyeurs à rouleaux d’alimentation + de décharge 6000 / 8000 millimètre
Offre 25114 Données techniques env. : - Diamètre du rouleau 500 mm - Projection 500 mm - Hauteur de passage max. 400 mm - Dimensions de la table 630 x 530 mm - Table pivotante 10 / 30 - Hauteur de la table à partir du sol 950 mm - Longueur de la lame de scie env. 3900 millimètre - Bande passante de scie env. 3 à 25 millimètres - Vitesses de coupe (probablement) 81 – 145 – 208 - 267 m/min - Entraînement 400 V / 1,1 kW - Poids env. 400 kg - Encombrement approximatif L 750 x H 2000 x P 1000 mm
Offre 23426 Spécifications: - Plage de coupe à 90 autour de 420 mm - plat 635 x 290 mm - Plage de coupe 45 rond 360 mm - plat 420 x 300 mm - Dimensions de la lame de scie 5200 x 32 x 1,1 mm - Vitesses de coupe en continu 18 à 108 m/min - Hydr. Levage + abaissement du cadre de la scie - Hydr. Matériau de l’étau - Pression de coupe réglable en continu 0 - 10 m/min - Puissance d’entraînement totale 400 V / 2,2 kW - Dispositif de refroidissement - La machine est montée sur bogie - Convoyeur à rouleaux d’alimentation mot. Entraîné 4000 mm - Convoyeur à rouleaux de décharge avec butée de dimension 6000 mm - Encombrement approximatif L 2500 x H 1400 x P 1100 mm - Appareil de musculation env. 950 kg - Poids des convoyeurs à rouleaux 2000 kg
Offre 25101 Spécifications: - Plage de coupe à 90 autour de 400 mm - plat L 400 x H 400 mm - Zone de coupe à 45 plat, L 320 x H, 320 mm - Surface de coupe à 60 plat, L 210 x H 320 mm - Hauteur du support de matériau env. 700 millimètre - Dimensions de la lame de scie 5090 x 34 x 1,1 mm - Vitesse de coupe réglable en continu 17 - 90 m/min - hydr. Levage – abaissement du cadre de la scie - Pression de coupe réglable en continu 0 - 10 m/min - Puissance d’entraînement totale 400 V / 3,5 kW - Dispositif de refroidissement - Convoyeur à rouleaux 7000 mm - Décharge – convoyeur à rouleaux avec butée + affichage numérique 4000 mm - Encombrement approximatif L 2000 x H 1400 x P 2800 mm - Poids env. 1200 kg
Offre 25115 Bras radial - Schiffterschnitt - Scie à pendule Spécifications: - Diamètre de la lame de scie 400 mm - Vitesse de la lame de scie 3000 tr/min - Hauteur de coupe jusqu’à env. 125 millimètre - Profondeur de coupe jusqu’à env. 600 millimètre - Mitre réglable sur 2 axes - Taille de la table env. L 800 x P 800 mm - Hauteur de la table 920 mm - Entraînement 400 V / 1,5 kW - Encombrement approximatif L 800 x H 1900 x P 1100 mm - Poids env. 200 kg
Offre 22252 Spécifications: - Plage de coupe à 90 ronds + carrés 330 mm - plat 600 x 320 mm - Onglet réglable gauche / droite 30 / 45 - Schnittb. à 45 Re + Li rond 320 mm - plat 350 x 320 mm - Hauteur du support de matériau env. 920 millimètre - Dimensions de la lame de scie 4440 x 34 x 1,1 mm - Vitesse de coupe réglable en continu 10 à 100 m/min - hydr. Levage – abaissement du cadre de la scie - Limite supérieure de course du cadre de la scie - Pression de coupe réglable en continu 0 - 10 m/min - hydr. Matériau de l’étau - Dispositif de refroidissement - Puissance d’entraînement totale 400 V / 2,2 kW - Encombrement approximatif L 1400 x H 1400 x P 2400 mm - Poids env. 1000 kg
Key data: 550 mm
Longueur max. de la scie : 6 000 mm Longueur de coupe la plus petite : 335 mm Diamètre max. de la lame de scie : 550 mm Positionnement automatique de la longueur via la commande E 255 Pivotement intérieur et extérieur 22,5° - 90° - 140° Incliner les angles entre 45 et 90 degrés Affichages numériques des angles Convoyeur à rouleaux mobiles Dispositif de pulvérisation de quantité minimale
cutting diameter: 240 mmsaw band length: 2730 mmcutting width: 270 mmcutting speed: 37 + 74 m/mindimensions of saw-band: 2730 x 27 x 0,90 mm: 240 mm: 230 mm: 270 x 230 mm: 210 mm: 200 mm: 200 x 210 mm: 130 mm: 130 mm: 130 x 160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,6 x 1 x 1,7 mhigh-quality processed metal band saw with 2 band speeds, miter up to60°, automatic cooling and AutoCut feed system - for sawing solid material andprofilesexecution High-quality processed and equipped metal band saw for saw cutsbest quality For sawing solid material and profiles made of steel, stainless steel and aluminium Miter cuts up to 60 degrees left Saw band speed adjustable in 2 stages Frame and gearbox made from one piece, very quiet and low-vibration cut Easy, clear miter adjustment with scale Quick release vice with quick release lever for easy ...
cutting diameter: 220 mmsaw band length: 2450 mmcutting width: 250 mmcutting speed: 40 / 80 m/mindimensions of saw-band: 2450 x 27 x 0,9 mm: 100 mm: 90 mm: 90 x 90 mm: 160 mm: 160 x 110 mm: 250 x 190 mmtotal power requirement: 0,75 / 1,1 kWtable height: 925 mmweight of the machine ca.: 218 kgdimensions of the machine ca.: 1300 x 700 x 1530 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamp ...
cutting width: 375 mmCutting height: 150 mmdimensions of saw-blade: 500 x 30 mmMotor output: 2 x 3 kWCutting length: 5100 mmspeeds: 2800 U/minair pressure: 6 barweight of the machine ca.: 700 kgdimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Fully automatic miter band saw- MAC 90 control- Saw feed infinitely adjustable via precision throttle- Infinitely adjustable clamping pressure- Infinitely variable speed adjustment of the saw band- hydraulic bundle clamping- chip conveyor- Cooling device- Micro dosing device- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 800 mmthroat: 765 mmworkpiece height: ? mmtotal power requirement: ? kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2 x 1 x 2,6 mNo. 1548Vertical band saw KÖLLE BG-80Working area: Table, tiltable 1200 x 800Passage saw blade machine stand 765 mmIDEAL saw blade welding and grinding deviceRoller diameter 800 mm.Space requirement approx. 2 x 1 x 2.6 mWeight approx. 900 kgmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 275 - 315 mmcutting diameter: 80 - 102 mmstroke: - mmtotal power requirement: 2 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,5 x 1, 5 x 2 mNo. 5230Cold circular saw with additional gearbox for 4 speedsEISELE VMS II - S - PV ( Typ-Nr. 421 )Additional gearbox 10/20/40/80 min-1Cutting speeds 8.5 - 80 m/minSaw blades Ø 275 - 315 mmSpace requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence)Weight approx. 400 kgWorking range: Ø 80-102 /flat 160x75/82Drive: 1,4/1,9Feed - roller conveyor approx. 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diamètre du rouleau : 400 mmGorge : 375 mmHauteur de la pièce : ? mmPuissance totale requise : kWPoids de la machine env. : tDimensions de la machine env. : mN° 1291Scie à ruban verticale PEHAKA USM-4Plage de travail : Passage 375Plateau de table pivotant 600 x 600 mm,Dimensions de la lame de scie : 2900-3040 x 3-12mmPlage de coupe de 3-180 m/min, Dispositif de soufflage de copeauxAppareil de soudage et de meulage idéal pour les lames de scie
cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 255 mmsaw band length: 2765 x 27 x 0,9 mmtable height: 950 mm: 18-110 m/min: 255 mmcapacity 90 degrees: square: 240 mmcapacity 90 degrees: flat: 300 x 180 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: square: 190 mmcapacity 45 degrees: flat: 200 x 160 mmcapacity 60 degrees: round: 135 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 130 x 100 mmcapacity 45 degrees: round: rechts 180 mmcapacity 45 degrees: square: rechts 160 mmcapacity 45 degrees: flat: rechts 180 x 100 mm: 1,5/1,8 kW: 350 kg: 1700 x 900 x 2000 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, eme ...
cutting diameter: 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: -- mm: 350 mm: 15 - 100 m/min: 4,0 kW: 2800 kg: 2200 x 3200 x 2200 mmFully automatic band saws with two-column guide for series cuts in particularmaterials that are difficult to machine and solid material.With this machine, MEP offers you a machine that is technically on thehighest level and by using the highest quality materials one is nothas an unbeatable, robust and torsion-resistant structure. An extremeRobust saw bow made of gray cast iron ensures the necessary stabilityimpressive cutting results and the strong cast iron columnswhich the saw arch slides by means of pre-stressed linear guides take care of themselvesat maximum load for the highest cutting precision. The modernMachine control (MEP NC 5.0) offers the user maximum ease of use andensures trouble-free operation. (Check/evaluation/correction inreal tim ...
saw blade diameter: 370 x 3,0 x 40 mmcutting diameter: 120 mmstroke: -- mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: li. 120 / re. 105 mmcapacity 45 degrees: square: li. 100 / re. 100 mmcapacity 45 degrees: flat: li. 130x100 / re . 130x10 mmcapacity 60 degrees: round: 110 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 90 x 100 mmtotal power requirement: 1,8 / 2,2 kWweight of the machine ca.: 392 kgdimensions of the machine ca.: 700 x 900 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional is a pneumatic oneVise = MA, availab ...
Diamètre de coupe : 340 / 340 290 mmLongueur de la bande : 600 52 2,5 mmLongueur de coupe max. : x 600 mmPuissance totale requise : 6 kWPoids de la machine env. : 2 tDimensions de la machine env. : 2,52,51,5 m
cutting diameter: 305 mmsaw band length: 3375 mmcutting width: 350 mmdimensions of saw-band: 3375 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,8 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 255 mmsaw band length: 2765x 0,9 x 27 mmcutting width: 300 x 180 mmturning speeds: 35 + 70 U/mintotal power requirement: 1,8 kWweight of the machine ca.: 450 tdimensions of the machine ca.: 1,7 x 1,23 x 1,75 mSPECIAL PRICE!Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250Super HA-I Easy• miter left 60° + right 45°• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Hydraulic vice can be moved sideways a.• Guided, high quality industrial bearings• Solid vice + machine casting• Large machine bed• Machine base with tool compartment and chip drawer• Cut monitoring by ammeter• Cutting pressure feed regulator• Support roller (infeed side)• Ball bearing turntableSemi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the s ...
capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 saw band length: 5850 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,45 tdimensions of the machine ca.: 5,85 x 3,6 x 2,7 m2-column band saw for quick cutting, K-tech 800Hwith pusher system P 15. P 30 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleReso ...
