Scies à ruban

BANDES ADALAEGE TYPE HB 250 C - 2 Snelheden - Dubbel vertek - Zaagdruk hydraulique regularbaar - Snelspanklem - Koeling - Afslag automatique - Zaagblad 2915 x 0,9 x 27 mm - Noodstop - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

AYEL-TECH BANDSAEGE TYPE CY270N - Variabele zaagsnelheid - Verstek - Zaagdruk hydraulisch regelbaar - Snelspanklem - Koeling - afslag automatique - Zaagblad 2480 x 27 x 0,9 mm - Noodstop - Documentatie DUTCHMACH Machines à travailler les métaux ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

AYEL-TECH BANDSAEGE TYPE CY355 - Half-automaat - Hydraulique - Traploos snelheid réglable 20/80 m/min - Dubbel verstek - Zaagdruk hydraulisch instelbaar - Koeling - Zaagblad 3770 x 34 x 1,1 mm - Noodstop - Documentatie - 400V DUTCHMACH Machines à travailler les métaux ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

BANDESAEGE TYPE BS 260 G - 2 Snelheden - Verstek - Zaagdruk hydraulique regularbaar - Snelspanklem - Koeling - Afslag automatique - Zaagblad 2455 x 0,9 x 27 mm - Noodstop - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

cutting diameter: 350 mmsaw band length: 3900 mmcutting width: 450 mm: 350 mmcapacity 90 degrees: flat: 450 x 280 mm: 350 x 350 mmband speed: 20 / 35 / 50 / 70 m/mindimensions of saw-band: 3900 x 27 x 0,9 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,46 tdimensions of the machine ca.: 2050 x 850 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scie à ruban -Bauer S300 -Performance de coupe/plat/90 degrés - 300mm Dnxhnj -Longueur de la lame de scie 3900x25x0.9mm -Vitesse de la bande 20-70m/min -Régulation de la pression de coupe réglable en continu -Dispositif de coupe d’onglet -Rouleaux de machine Dimensions : LxlxH 2.3x1.3x1.5 mètres/poids 550Kg

Fabricant : Behringer Type : HBP 220 A Année de construction : 1993 État : très bon Vitesse de coupe : max. 120 m/min

Key data: 220 mm

Manafacture: Behringer Type: HBP220 Année de fabrication: 1995 Dimensions: 2400 x 1800 x 1500 mm Poids: ~1300 kg Surface de coupe: 350 x 220 mm Ø : 220 mm - Étau hydraulique -Convoyeur Fonctionne parfaitement, démarrage à deux mains

Description: Scie à ruban BEHRINGER très bien conservée avec bloc à rouleaux robuste jusqu’à environ 50 t chargeable. La machine est équipée en standard d’un contrôle de vitesse de coupe infiniment variable, de sorte qu’un sciage universel de tous les matériaux à faible et haute résistance est obtenu. Détails: Modèle HBP650-1204A Numéro de machine 706537 Dimensions 10 000 x 67 x 1,6 m Plage de travail ronde 20 - 650 mm Surface de travail carré min. 20 x 20 mm Surface de travail carrée max. 1 200 x 600 mm Vitesse de coupe 10 - 110 m/min. Longueur de pièce restante fonctionnement automatique env. 90 mm Longueur de pièce restante manuelle env. 10 mm Entraînement de scie motorisée 9,2 kW Pompe hydraulique motorisée 5,5 kW Tension 400 V, 50 Hz Charge de raccordement env. 16 kW Consommation  ...

Key data: 320 mm, 4860 mm

- Diamètre d’usinage : 320 mm - Dispositif de liquide de refroidissement : oui - Coupe d’onglet : 45 -/+ degrés - Dimensions de la lame de scie : 4860 x 34 x 1,1 mm - Butée : avec règle 450 mm - Puissance totale : 2,8 kW - Poids de la machine : 1500 kg - Encombrement (L x P x H) : 2,95 x 1,6 x 1,8 m - État : bon Détails sur roulettes, à colonne, bon état, prêt à l’emploi Accessoires 4 lames de scie à ruban

cutting range: 310 mmcapacity 90 degrees: flat: 520 x 310 mmcapacity 45 degrees: flat: RE 260 x 310 mmcapacity 45 degrees: flat: LI 350 x 310 mmcapacity 60 degrees: flat: LI 230 x 300 mmdimensions of saw-band: 5000 x 34 x 1,1 mmvice: 530 mm Öffnungband speed: 14 - 125 m/mincoolant tank: 60,0 ltotal power requirement: 4,0 kWweight: 2250 kgrange L-W-H: 2600 x 1500 x 2300 mm maintained condition ()Furnishing:- electro-hydraulic band saw semi-automatic 2-column guided- for large cutting areas- including simple miter adjustment left 60° + right 45°- manual miter adjustment including analog miter display- Swivel control panel, front left- Machine can be operated manually / semi-automatically- horizontal and vertical material tension- continuous adjustment of the material tension- continuous adjustment of the saw band speed (14-125 m/min)- continuous feed adjustment of the saw frame- Coolant ...

: 230 mm : 2730 mm : 320 mm : 230 mm : 320x130 mm

: 230 mm : 2730 mm : 320 mm : 230 mm : 320x130x mm

cutting diameter: 250 mmsaw band length: 3600 mmcutting width: 300 mm: 20 - 100 m/min: 3600 x 27 x 0,9 mm: 250 mm: 250 mm: 250 x 300 mm: 640 mm: 2,05 kW: 580 kgMetal band saw - fully automaticFurnishing:- manual stop with limit switch- hydr. vice- Control panel- continuous adjustment of the belt speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 3660 mmcutting width: 300 mm: 20 - 100 m/min: 3660 x 27 x 0,9 mm: 320 mm: 300 mm: 320 x 300 mm: 640 mm: 2,94 kW: 752 kg: 1900 x 850 x 1300 mmMetal band saw - fully automaticFurnishing:- Coolant device- manual stop with limit switch- hydr. vice- Control panel- continuous adjustment of the belt speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1110 mmsaw band length: 10500 x 67 x 1,6 mmcutting width: 1110 mm: 1110 x 1110 mmtable height: 545 mmcapacity 90 degrees: round: 1110 mmcapacity 90 degrees: square: 1110 x 1110 mmcutting speed: 20 - 100 m/min: 1020 mm: 675 mm: 675 x 675 mmCapacity 45° rectangular: 675 x 1020 mmtotal power requirement: 10 kWweight of the machine ca.: 5,86 tdimensions of the machine ca.: 4,5 x 1,7 x 2,7 mHorizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies coolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically.The data for this ad was created with Mod ...

cutting diameter: 230 mmsaw band length: 2730 x 27 x 0,9 mmcutting width: 130 mmspeed: 35 - 70 m/minCapacity 90° rectangular: 320 x 130 mm: 230 mm: 180 mmCapacity 45° rectangular: 230 x 100 mm: 150 x 150 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: flat: 120 x 100 mmcapacity 60 degrees: square: 100 x 100 mmtable height: 760 mmtotal power requirement: 1,8 kWweight of the machine ca.: 430 kgdimensions of the machine ca.: 1,35 x 0,7 x 1,3 mOn semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished.inverterhydraulic clampinghydraulic saw blade tension adjustmentautomatic stop?material transport systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mmsaw band length: 3160 x 27 x 0,9 mmcutting width: 350 mmCapacity 90° rectangular: 350 x 230 mm: 210 mmCapacity 45° rectangular: 270 x 200 mm: 170 x 170 mmcapacity 60 degrees: round: 150 mmcapacity 60 degrees: flat: 150 x 100 mmcapacity 60 degrees: square: 100 x 100 mmspeeds steplessly adjustable: 20 - 100 m/mintotal power requirement: 2,0 kWweight of the machine ca.: 476 kgdimensions of the machine ca.: 1,73 x 0,77 x 1,46 mMachine description :• semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellent price-performance ratio• robust constructed monoblock saw frame• manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH )• miter on mobile control panel digitally readable (not BMSY 270 DGH )• Hydraulic clamping of the horizontal vise• automatic saw frame rais ...

: 270 mm: 3160 mm: 350 mm: 270 mm: 350x220 mmdimensions of saw-band: 3160x27x0,9 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 440 mm : 5200 mm : 610 mm : 440 mm : 610x440 mm

cutting diameter: 460 mmsaw band length: 5200 mmcutting width: 650 mm: 460 mmCapacity 90° rectangular: 650 x 460 mm: 380 mm: 380 x 380 mmCapacity 45° rectangular: 380 x 460 mmspeeds steplessly adjustable: 20 - 100 m/mindimensions of saw-band: 5200 x 41 x 1,3 mmtable height: 590 mmtotal power requirement: 4,67 kWweight of the machine ca.: 1,52 tdimensions of the machine ca.: 3100 x 1000 x 1800 mHorizontal band saw. The bow is made of heavy steel and the two pillarsconstitute a strong and rigid saw frame. This ensures high accuracy whencutting. The machines are fitted with an integrated coolant pump that suppliesoolant to both guide assemblies. Blade guides with rollers and carbide padsprovide precise support for the blade. The machines switch off automaticallyat the end of the cutting proces and the saw arm is lifted hydraulically.inverterhydromechanic blade tensionswarf brushhydraulic ...

BANDES BEKA-MAKAEGE TYPE BMSY-230 DGH - Demi-automaat - Hydraulique - 2 Snelheden - Dubbel vertek - Zaagdruk hydraulique instelbaar - Koeling - Zaagblad 2730 x 27 x 0,9 mm - Voetbediening - Noodstop - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

cutting diameter: 255 mmsaw band length: 2765 x 27 x 0,9 mmtable height: 950 mm: 18-110 m/min: 255 mmcapacity 90 degrees: square: 240 mmcapacity 90 degrees: flat: 300 x 180 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: square: 190 mmcapacity 45 degrees: flat: 200 x 160 mmcapacity 60 degrees: round: 135 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 130 x 100 mmcapacity 45 degrees: round: rechts 180 mmcapacity 45 degrees: square: rechts 160 mmcapacity 45 degrees: flat: rechts 180 x 100 mm: 1,5/1,8 kW: 350 kg: 1700 x 900 x 2000 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, eme ...

cutting diameter: 305 mmsaw band length: 3375 mmcutting width: 350 mmdimensions of saw-band: 3375 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,8 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 330 mm: 450x320 saw band length: 4250x34x1,1 mmband speed: 40 + 80 m/mintable height: 845 mmsaw band width: 34 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,985 tdimensions of the machine ca.: 1,4 x 2,0 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mMiter cuts to 60 ° left- cutting speed 35/70 m / min.- Vice with rapid clamping device- Bandsaw blade guide made of hard metal- Band tension control- Electric cooling automatic.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2455 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 mm: 150 mm: 150 x 210 mm: 220 mm: 210 mm: 230 x 185 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mmsaw band length: 2730 mmcutting width: 270 mmcutting speed: 37 + 74 m/mindimensions of saw-band: 2730 x 27 x 0,90 mm: 240 mm: 230 mm: 270 x 230 mm: 210 mm: 200 mm: 200 x 210 mm: 130 mm: 130 mm: 130 x 160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,6 x 1 x 1,7 mMiter left 60 °Quick-release vice can be moved in the X-Y axisQuick release lever for easy handlingMachine base with automatic coolingElectrical monitoring of band tension + band breakage, saw band cover.The saw only runs when it is OK.AutoCut additionally:Economical, semi-automatic operation through automatic saw framelowering - continuously adjustableHydraulic brake cylinder for stepless feed via limit switchRapid traverse (rapid approach to the workpiece)Manual operation possible The data for this ad was created with ModulMWS - the software solution o ...

cutting diameter: 250 mmsaw band length: 2965 mmtable height: -- mm: 285 mm: 37 + 74 m/min: 2965x 27 x 0,9 mm: 130 mm: 130 mm: 130 x 140 mm: 200 : 200 : 200 x 200 : 240 mm: 200 mm: 285 x 200 : 1,1/1,3 kW: 0,3 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mmsaw band length: 2765x 0,9 x 27 mmcutting width: 300 x 180 mmturning speeds: 35 + 70 U/mintotal power requirement: 1,8 kWweight of the machine ca.: 450 tdimensions of the machine ca.: 1,7 x 1,23 x 1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1000 mm: 1000 mm: 1200x1000 mmsaw band length: 11300 x 80 x 1,3 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 18 kWweight of the machine ca.: 9,0 tdimensions: 5,0 x 1,68 x 3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 900 mm: 900 mm: 900x900 mmsaw band length: 9300 x 67 x 1,1 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 11 kWweight of the machine ca.: 8,45 tdimensions: 4,485 x 1,68 x 3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mmsaw band length: 2920 x 27 x 0,9 mmtable height: 940 mmband speed: 35 + 70 m/mincapacity 90 degrees: flat: 285 x 200 mmcapacity 90 degrees: square: 250 x 250 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: flat: 200 x 200 mmcapacity 45 degrees: square: 200 x 200 mmcapacity 60 degrees: round: 150 mmcapacity 60 degrees: flat: 140 x 180 mmcapacity 60 degrees: square: 140 x 140 mmtotal power requirement: 2,2 / 2,9 kWweight of the machine ca.: 310 kgdimensions of the machine ca.: 1700 x 800 x 2050 mmFurnishing:- semi-automatic band saw, with miter adjustment- Miter adjustment via large turntable- 2x saw band speeds- Stepless lowering of the saw frame- hydraulic material clamping- Machine base- 3x feed roller conveyor included- User manual (PDF format)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offre 22606 Spécifications: - Dimensions de la lame de scie 2765 x 27 x 0,9 mm - 2 vitesses de coupe 35 - 70 m/min - Régulation de la pression de coupe - Hydr.- Pneum. Lever + abaisser le cadre de la scie - Pivots de la table de la machine pour les coupes d’onglet - Zone de coupe - à 90 env. 255 mm - plat 300 x 180 mm - à 45 Li env. 210 mm - plat 210 x 160 mm - à 45Re env. 180 mm - à 60Li env. 135 mm - Largeur d’ouverture max. de l’étau 365 mm - Entraînement 400 V / 1,3 / 1,7 kW - Encombrement env. L 900 x H 1800 x P 1700 mm - Poids env. 350 kg

capacity 90 degrees: round: 100 mmcapacity 45 degrees: round: 65,0 mmcapacity 90 degrees: flat: 100 x 150 mmcapacity 45 degrees: flat: 60 x 100 mmdimensions of saw-band: 1470 x 13,0 x 0,65 mmvolt: 230 V: 45,0 m/minweight: 26,0 kgrange L-W-H: 700 x 320 x 420 mmscope of delivery- saw band- workpiece stop- Quick release vice- Ergonomic handle- Chip collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BERNARDO BANDSAEGE TYPE HBS 275 - 2 Snelheden - Verstek Zaagdruk hydraulique regularbaar - Snelspanklem - Koeling - Afslag automatique Zaagblad 2480 x 27 x 0,9 mm - Noodstop - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

cutting diameter: 260 mmsaw band length: 3660 x 34 x 1,1 mmcapacity 90 degrees: flat: 280 x 260 mmvice: 280 mmturning speed range:: 20 - 120 m/minwork height max.: 660 mmvoltage: 400 Vtotal power requirement: 3,75 kWweight of the machine ca.: 1700 kg.dimensions of the machine ca.: 2000 x 1520 x 1240 mm New price ~ 18.000 euros very few operating hours (!)Furnishing:- 2-column guided band saw - fully automatic- Fully automatic vise system- Feed unit ensures accurate positioning of the material Feed length - single stroke : 400 mm- hydraulic vise clamping- hydraulic saw blade tensioning- 34 mm wide band saw blade.- Infinitely variable speed adjustment of the saw band- automatic chip conveyor- Spare bandsaw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 165 mmsaw band length: 2400 x 0,90 x 20 mmcutting width: 225 mmband speed: 35 7 70 m/minCapacity 90° rectangular: 225 x 160 mm: 225 x 160 mm: 165 x 165 mm: 165 mmCapacity 90° rectangular: 170 x 100 mm: 155 x 155 mm: 155 x 155 mmcapacity 60 degrees: round: 65 mmcapacity 60 degrees: flat: 110 y 60 mmcapacity 60 degrees: square: 60 x 60 mmtotal power requirement: kWweight of the machine ca.: 150 kgdimensions of the machine ca.: 1100 x 450 x 1350 mmbase: Coolant System: pneumatic clamping: miter device: saw bands: Operating Instructions: manual band saw machine for industrial workdeveloped.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Modèle : STG 230 GANC Modèle : SR-230 n° SR-230/070/199 Connexion : 3x400V Boîte EL : ASTP

Vitesses de coupe : 40/80/min Gamme de mitres: gauche jusqu’à 45 / droite jusqu’à 60 Le cadre de la scie est amené à la position de départ à la main. La vitesse d’abaissement est contrôlée par une soupape d’accélérateur (sur le cylindre du fraisage) et dès que le cadre de la scie a atteint la position finale, la course de courroie s’éteint. Vous n’avez pas besoin de rester près de la machine lorsque vous vous crigez. La scie dispose d’une pompe à eau de refroidissement électrique et un entretien a été effectué sur la scie. L’étau dispose d’un dispositif à dégagement rapide Options: 1x lame de scie 2720x27x0.9mm Nombre de dents de votre choix - à partir de 5 lames de scie 5% - à partir de 10 lames de scie 10% Concentré de liquide de refroidissement de 5 kg  ...

cutting diameter: 250 mmsaw band length: 3820 mmcutting width: 300 mmdimensions of saw-band: 3820 x 27 x 0,9 mmfeed length: 2000 mm/Hubband speed: 18 - 106 m/mincapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 300 x 300 mmcapacity 90 degrees: square: 300 x 300 mmcapacity 45 degrees: round: R 220 mmcapacity 45 degrees: flat: R 220 x 300 mmcapacity 45 degrees: square: R 220 x 220 mmcapacity 45 degrees: round: L 220 mmcapacity 45 degrees: flat: L 240 x 300 mmcapacity 45 degrees: square: L 240 x 240 mmcapacity 60 degrees: round: R 120 mmcapacity 60 degrees: flat: R 120 x 300 mmcapacity 60 degrees: square: R 120 x 120 mmcapacity 60 degrees: round: L 140 mmcapacity 60 degrees: flat: L 240 x 300 mmcapacity 60 degrees: square: L 140 x 140 mmcoolant capacity: 60 ltotal power requirement: 4 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 4,2 x 2,2 x 2,3 mThe data for t ...

Manuel du dispositif de serrage groupé

cutting diameter: 560 mmsaw band length: 7.260x54x1,6 mmControl: mit 99 Programmen work height max.: 650 mmChip coveyor: inkl. power capacity - table: 10 HPsawing motor: 650 kWweight of the machine ca.: 4.800 kgdimensions of the machine ca.: 3.400x2.050x2.380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 4400 x 34 x 1,1 mmtable height: 650 mmcutting speed: 15 - 105 stufenlos m/mincutting range: 90° = Ø320 / 500 x 320 mmtotal power requirement: 2,7 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,3 x 2,5 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bande de la Fa DoAll Dimensions de 1,3 m de large; 1,3 m de bas; 2m de haut Zone de table de travail 850-670mm pièce de travail max à travers la boîte environ 300mm Pré-pose transmission à vitesse infiniment variable Dispositif de soudage avec la pierre de broyage pour les lames de scie de bande Nourrir infiniment réglable; Retour sans fonction

N° Inv. : 7179 Modèle : BS 740 RS3 Producteur : FELDER Création : 2021 Paramètres: Largeur de la machine : 860 mm Longueur de la machine : 1100 mm Poids de la machine : 500 kg Hauteur de coupe : 450 mm Longueur de la lame de scie : 5365 mm Équipement: Alimentation automatique de la pièce

cutting diameter: 225 mmsaw band length: 2480 mmcutting width: 250 mmcutting speed: 45 / 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mmcapacity 45 degrees: flat: 135 x 185 - 145 x 150 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 60 degrees: flat: 63 x 107 - 69 x 90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 70 mmcapacity 90 degrees: flat: 240 x 160 - 250 x 110 mmcapacity 90 degrees: round: 225 mmcapacity 90 degrees: square: 185 mmtotal power requirement: 0,75 / 1,1 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 1385 x 580 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Équipement standard cadre de scie en fonte robuste résistant à la torsion brosse à raser entraînée puissant moteur industriel de l’engrenage de ver arrêt automatique après l’arrêt de coupe tension mécanique de bande de scie avec la surveillance électrique de rupture de bande Vice à libération rapide, mobile Hydr. Abaissant le cadre de scie avec la fonction de réponse rapide (infiniment réglable) pompe de refroidissement électrique Guides de bande de scie à carbure de précision, sol (réglable) table de soutien ronde de grande taille, avec des coupures d’attères, indicateur d’adier (échelle) du côté de l’opérateur passage direct du mode de fonctionnement manuel au mode de descente facilement amovible plateau de collecte de puces Les matériaux s’arrêtent à 500 mm avec l’échelle incl. a vu la bande peignant l’engrenage 4/6. Donnée ...

Nouvelle machine Fonction de saether et de levage entièrement hydraulique du cadre de saege Hydr. Ouverture et fermeture du bâton de serrage Arrêt après l’extrémité de coupe, guide de retour du saegearm à la position de départ Cadre de saege de torsion-force faite d’acier moulé (multiple nervuré) Cylindre hydraulique à court-temps pour le bâton de serrage Guide praezise de sable saebean de carbure moulu, réglable Pompe électrique de repère Tension de ceinture manuellement avec affichage, incl. saeband électrique et surveillance de la pression de coupe Vice hydraulique (ouverture et fermeture) Spaeneraeumbuerste en cours d’exécution le long Table de soutien ronde pleine de grande taille, tournant avec des coupures d’adure avec le canal de coupe prédéterminé, réglage d’adure manuellement, lecture sur l’échelle Les matériaux s’arrêtent à 50 ...