Scies circulaires à froid

– Lame de scie 400 mm – Double onglet – 4 pinces pneumatiques – Système Hydrocheck – Capot de protection automatique – Système de lubrification par brouillard – 1 convoyeur à rouleaux 300 cm – 1 convoyeur à rouleaux 300 cm avec butée de longueur –Sarbacane –Documentation – 400V

saw blade diameter: 450 mmcutting diameter: 150 mmstroke: 1300 mmControl: cutting range: 140x140 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 102 mmcapacity 45 degrees: round: 95 mmcutting range rectangle: 140 x 65 mmCapacy 45°: rectangle: 90 x 70 m/min.turning speed range:: 33 + 66 UpMtotal power requirement: 1,1 / 2,0 kWweight of the machine ca.: ca. 200 kgdimensions of the machine ca.: 0,57 x 1,04 x 1,83 mCondition: good: Electric 380 Volt: Base unit: rollbar Double-parallel-clamping stick: Cooling equipment: Electric 380 Volt: Member of the association of German machine tools dealers FDM and machinedealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 235 mm

d’occasion, fonctionnel

dimensions of saw-blade: 250 mmcutting range: 80,0 mmcapacity 90 degrees: square: 70 x 70 mmcapacity 45 degrees: round: 80,0 mmcapacity 45 degrees: square: 60 x 60 mmwork height max.: 900 mmsaw blade turning speeds: 20 / 40 U/minengine output: 1400 / 2800 U/min.total power requirement: 1,1 kWweight: 175 kgrange L-W-H: 550 x 950 x 1800 mmFurnishing :- manual cross-cut/cold circular saw- for cutting profiles, pipes, solid materials- manual vice with star handle- including miter adjustment- ergonomic control handle- Pole-changing drive motor- 1x BEWO feed roller conveyor- Coolant device- Machine base Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9164089The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele LMS 1 Vitesse 4000 tr/min 380 V 16 A Non testé sans bouchon Table pivotante Vice

Scie circulaire à froid Eisele LMS 2 380 V 16 A 1700 - 3400 tr/min 1 mâchoire de serrage sans verrouillage

Scie circulaire à froid Eisele LMS2 Tension 380 V 16 A Vitesses: 1700 - 3400 tr/min Bon état

saw blade diameter: 275 x 2.5 x 40 mmcutting diameter: 90.0 mmcapacity 90 degrees: flat: 140 x 70 mmcapacity 90 degrees: square: 80 x 80 mmcapacity 45 degrees: round: 70.0 mmcapacity 45 degrees: flat: 90 x 80 mmcutting speed: 40 / 80 U/mintotal power requirement: 1.2 / 1.4 kWweight of the machine ca.: 250 kgdimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition ()Furnishing:- manual cold circular saw- Column-guided saw head- one-sided miter adjustment over mounted turntable Material support table with degrees- mobile machine base- Pole-changing motor (2x cutting speeds)- manual cutting/lifting version- manual material tensioning- 1x circular saw blade- 1x material stop Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9164093The data for this ad was created with ModulMWS - the software solu ...

Key data: 300 mm

D’une liquidation d’entreprise Spécifications: Eisele VMS 300 Diamètre de la lame de scie 300mm Coupe d’onglet jusqu’à 60° droite---gauche 30° possible Butée droite + bloc à rouleaux Zones de coupe 90° 120x75mm---45° 80x75mm Rond 90mm Vitesses de la lame de scie 40/80 m/min Pompe à liquide de refroidissement Rbeld 380 volts

Semi-automatique de scie circulaire en très bon état et pleinement fonctionnel. Équipement: • Vitesse de poussée réglable en continu • Action d’incitation hydropnéumatique • Tension des matériaux pneumatique • Dispositif de pulvérisation et de réfrigérant • Capot électrique. Verrouillé • Réglage de l’honneur en continu 46 Machines de travail en tôle pour la fabrication de canaux d’air angulaires et ronds, par exemple.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. dans nos autres annonces, ainsi que sur demande.

diamètre de coupe: 440 mmpoids de la machine ca.: 780 kgmiter: feed:

N° 5230 : 1 Gebr. Scie circulaire à froid avec boîte de vitesses supplémentaire pour 4 vitesses Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 avec alimentation - convoyeur à rouleaux env. 2 m Arb.-Ber.: 80-102 /Flach 160x75/82 mm, Puissance d’entraînement: 1,4/1,9 kW Autre: Boîte de vitesses supplémentaire 10/20/40/80 min-1 Vitesses de coupe 8,5 - 80 m/min Lames de scie 275 - 315 mm Espace requis env. 80 x 90 x 180 cm (plus convoyeur à rouleaux + butée) Poids env. 400 kg N° 5230 : 1 scie circulaire à froid d’occasion avec boîte de vitesses supplémentaire pour 4 vitesses Faire EISELE, mod. VMS II - S - PV ( Type-No. 421 ), neuf 1986 avec Feed - convoyeur à rouleaux env. 0 / Plage de travail: 80-102 /Flat 160x75/82 mm, Moteur principal: 1,4/1,9 kW Remarques: Engrenage auxiliaire 10/20/40/80 min-1 Vitesses de coupe 8,5 - 80 m/ ...

Diamètre de la lame de scie: 450/500 mm Diamètre de coupe: mm Course : mmPuissance totale requise: 3,6 kWPoids de la machine CA.: 1130 tDimensions de la machine CA.: m- Scie circulaire - semi-automatique - hydraulique

Diamètre de la lame de scie : 800 x 800 x 1500 mmDiamètre de coupe : 200 mmCourse : 150 mmDimensions de la machine env. : mpuissance totale requise : 3 kWpoids de la machine env. : t

saw blade diameter: 450 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 400 x 30 mmcapacity 90 degrees: flat: 345 x 70 mmcapacity 90 degrees: square: 140 x 140 mmcapacity 45 degrees: flat: 280 x 30 mmcapacity 45 degrees: flat: 240 x 70 mmstroke: 240 mmsaw blade turning speeds: 6 / 12 / 24 / 48 n/minwork height max.: 1000 mmengine output: 3,0 / 3,6 kWweight of the machine ca.: 1150 kgrange L-W-H: 1000 x 1330 x 1860 mmFurnishing:- electro-hydraulic semi-automatic cold circular saw- EISELE front control panel- robust and stable machine base- continuously adjustable feed speed of the saw blade- front guard / foldable- Drive via worm gear including EISELE rotation compensation”- comfortable miter adjustment in both directions via large turntable- suitable for the use of Ø 400/425/450 saw blades- hydraulic material tension- Pole changer motor for the gear stages- Coolant device- User m ...

dimensions of saw-blade: 350 x Ø 40 x 3 mmcutting range: 120 mmcapacity 90 degrees: square: 100 x 100 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 45 degrees: flat: 120 x 100 mmcapacity 60 degrees: round: RE 100 mmcapacity 60 degrees: square: RE 85 x 85 mmcapacity 60 degrees: flat: RE 85 x 100 mmwork height max.: 900 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6,0 - 8,0 bartotal power requirement: 1,4 / 1,9 kWweight: 340 kgrange L-W-H: 1010 x 765 x 2175 mmFurnishing :- semi-automatic vertical cold circular saw- Pneumatic quick clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment- Convenient stroke adjustment of the saw unit via clamping levers- Generously dimensioned gears- with Eisele rotation compensation for a long saw blade service life- Convenient saw blade chang ...

dimensions of saw-blade: Ø 320-350 x 3.0 mmcutting range: 120 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 90 degrees: flat: 200 x 90 mmcapacity 45 degrees: flat: 140 x 90 mmwork height max.: 925 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6.0 - 8.0 barengine output: 1400 / 2800 U/min.total power requirement: 2.0 / 2.6 kWweight: 470 kgrange L-W-H: 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition ()Furnishing :- semi-automatic vertical cold circular saw- pneumatic material quick-clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment with fixed stops- Convenient stroke adjustment of the saw unit using a clamping lever- Generously sized gearboxes- with Eisele rotation compensation for long saw blade service life- Convenient saw blade change- High productivity with minimal space requirements (less than 1 m²)- Coola ...

saw blade diameter: 350 x 4,0 x 25,4 mm mmcutting diameter: 120 mmweight of the machine ca.: 150 kgspeeds: 4400 U/minvoltage: 400 Vtotal power requirement: 5,5 kWdimensions of the machine ca.: TBH 1,3 x 1,0 x 1,8 m• Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel)• Miter cut• Robust commercial and industrial design• Separation area max. 140x90 mm• Cutting disc diameter 350 mm x 4.0 x 25.4 mm• Power machine with (5.5 KW) 5,500 W drive cable,• Includes 3 pieces of cutting discsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine à sciage circulaire à froid forte avec l’alimentation de rouleau. La table de fuite et le magazine de faisceau ne sont pas disponibles.

saw blade diameter: 1250 mmcutting diameter: 380 mmcutting range: 480x320 mmmotor speeds:: 3000 U/minfeed speeds: 1000 mm/minmain drive motor: 112 kWchip conveyor: cutting speed: 10-265 m/mintotal power requirement: 125 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: Ø 15 - 100 mmsawing motor: 11 kWsaw speed: 30-130 U / minhydraulic motor: 2,2 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW Siemenssaw-blade dia.: Ø360 x T2.6 x 2.25 x 40 mmcutting range min.: 3000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2900 x 7400 mbarrel diameter: mmbarrel diameter: mmSaw speed: rpm /minweight of the machine ca.: 4900 kgGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mmSaw Body: 30 Grad Linear Schlitten sawing motor: 15 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 30-120 rpm /minsaw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mmcutting range min.: 1600 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kgrequired space: mGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mmSaw Body: 30 Grad Linear Schlitten sawing motor: 15 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 30-120 rpm /minsaw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mmcutting range min.: 1600 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kgrequired space: 3200 x 7600 mEmail us now at kontakt@atmh.deGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mmsawing motor: 30 kWhydraulic motor: 5,5 kWSaw Feeding Servo: 3 KW SiemensMaterial Feeding Motor: 3 KW SiemensSaw speed: 30-80 rpm /minsaw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mmSaw speed: 30-80 rpm / U pro minweight of the machine ca.: 9000 kgGERD WOLFF GLS-250High-performance circular SawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mmsawing motor: 30 kWhydraulic motor: 5,5 kWSaw Feeding Servo: 3 KW SiemensMaterial Feeding Motor: 3 KW SiemensSaw speed: 30-80 rpm /minsaw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mmSaw speed: 30-80 rpm / U pro minweight of the machine ca.: 9000 kgGERD WOLFF GLS-250#High-performance circular SawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75#High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 scie en métal dur de rail d’occasion avec unité de forage Mfc.: Type Heller: TEK001-73-37 Voiture de scie: 610? 710 mm Vitesse de coupe ? 6 étapes: 63-200 m/min. Zone de coupe : hauteur du rail jusqu’à : 200 mm de largeur du rail jusqu’à : 200 mm Vitesse d’alimentation: 50? 1250 mm/min. Puissance: 50 kW Unité de forage Qty. 3 Forage de broches Diamètre de forage : 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Course de changement d’outil (adj.) : 380 mm Diamètre de fuseau de forage : 60 mm Min. distance de l’extrémité du rail: 33 mm Distance de fuseau de forage - fuseau 1-3: min. 228 mm max. 600 mm Distance de broche de forage ? fuseau 1-2: min. 114 mm max. 486 mm Vitesse d’alimentation de forage : 40 ? 200 mm/min. Puissance motrice: 30 kW, 1420 RPM Gamme révolution: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 14 ...

Key data: 230 mm

- Coupe-onglet: 90 -/+ degrés - Plage de serrage : 90 mm - Niveaux de vitesse : 36 / 72 m/min - Diamètre de la lame de scie: 230 (max. 250) mm - Puissance totale : 0,75 kW - Poids de la machine : 180 kg - Dimensions (L x P x H) : 0,8 x 0,6 x 1,6 m - Condition: bon Détails Mitre, serrage pneumatique automatique

YOC 1994 Diamètre de la lame de scie (mm): 400 Vitesses de coupe (m/min): 13/26, 10/20,15/30 Puissance du moteur (kW) 1,7 / 2,6 Plage de travail autour de 90 / 45: 130 Plage de travail carrée 90 / 45: 120 / 110 Plage de travail acier plat 90 / 45: 305X 40 / 245 x 30 Plage de travail debout 90 / 45: 120 X 55 Dimensions LxLxH (mm): 800 x 1070 x 1780 Poids (kg): 820 Série n° 116 986 Travaux réalisés : Remplacement du câble au moteur, de la pompe à eau de refroidissement et de l’interrupteur de fin de course dans la salle des machines - effectué. Cylindre d’alimentation nouvellement scellé Remplacement de l’huile de transmission Réservoir hydraulique nettoyé / huile et filtre remplacés Interrupteur de fin de course dans la salle des machines remplacé Autres réglages effectués

saw blade diameter: Ø 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 315 x 40 mmstroke: 150 mmcutting speed: 10 - 30 m/mintotal power requirement: 1.8 / 2.7 kWweight of the machine ca.: 850 kgrange L-W-H: 1200 x 1000 x 1700 mmFurnishing:- robust cold circular saw with powerful drive- electro-hydraulic metal circular saw - underfloor Underfloor = saw blade delivery from below- electro-hydraulic material hold-down device manual fine feed- Miter adjustment on both sides via large turntable including analogue degree display- continuous feed adjustment of the saw blade- all gears are hardened and ground- entire gearbox runs in an oil bath- all bearing points have rolling bearings- pole-changing motor- Proven guidance of the saw blade in a strong pivot bearing- Discharge roller conveyor including fastening- User manual (PDF) Machine link:- ht ...

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de la lame de scie: 400 mmonglet: . : Kühlung poids de la machine env.: 1 tnombre: 4 Stück

Lame de scie Ø: 400 mm Plage de coupe à 90° rond : 130 mm Plage de coupe à 90° rectangle : 305 x 40 mm Plage de coupe en mitre à 45° rond : 130 mm Zone de coupe en mitre à 45° rectangle : 245 x 40 mm Vitesse de coupe: 10/20 m/min Moteur d’entraînement : 380 V, 1,7/2,6 kW Espace requis: 1100 x 1000 x 1900 mm Poids: 700 kg

Diamètre de la lame de scie : 400 mm Diamètre de coupe : 130 mm Course : 150 mmVitesse de coupe : 30 - 130 m/minPuissance totale requise : 1,5 / 2,6 kWPoids de la machine env. : 0,55 tDimensions : 1,2 x 0,8 x 1,7 m

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10 / 20 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,45 x 1,20 x 2,00 m- mitre cutting +/- 60 ° with DRO -Accessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scie circulaire Kaltenbach KKS 450 avec système de mesure de longueur L-40NC Spécifications Type: Kaltenbach Système de mesure de longueur: L-40NC Année de construction : 2005 Type de scie circulaire: KKS 450 H Année de construction : 1998 Lame de scie: 450mm / support 50mm Plage de travail max (90) 150mm Plage de travail carrée (90) 140x140mm Zone de travail acier plat (90) 330x40mm Plage de travail U-acier debout (90) 120x55mm Plage de travail Rond (90) 150mm Gamme de mitres 0 - 90 0 Dimensions: LxLxH 1110x1020x2000mm Poids: env. 950kg Description : __________: Scie universelle hydraulique d’occasion de conception semi-automatique avec table rotative pour coupes de mitres: - Serrage, sciage, retour, ouverture – simplement en appuyant sur un bouton - Réglage de la hauteur de coupe via des boutons-poussoirs - Commande électronique conviviale dir ...

Moteur de scie pour scie kaltenbach KKS 400 Moteur a été nouvellement entreposé et le bouclier de stockage avant renouvelé . A été utilisé comme remplacement dans l’entretien . Réamentable moteur.

Diamètre de la lame de scie: 400 mm Capacité de sciage : 130 mm rond / 120 x 120 mm carré Réglage de la scie: 45º gauche / droite Pas de scie: 13/17/25 mtr. par min. Puissance du moteur principal : 2,7 kW Pays d’origine: Allemagne Poids de la machine: 900 kg Machine LxlxH: 1080 x 900 x 1760 mm

diamètre de coupe : 260 mmnuméro de série : 109967 volt : 380 Vfréquence : 50 Hzpoids de la machine env. : 500 t

Système de mesure de longueur L-40NC adapté à la scie circulaire Kaltenbach KKS 450 (veuillez demander KKS 450 séparément) Directement auprès du client utilisé à partir de CH-Oberrohrdorf disponible.

diamètre de la lame de scie: 380 mmrcer le pouvage: ja poids de la machine ca.: 1,3 t

Type de machine: Scie circulaire en aluminium Fabricant: KALTENBACH Modèle: TL 200 Condition: bon Type d’offre: machine d’occasion Spécifications: Gamme de coupe: Ø 55 mm, Feuille Ø: 200 mm Type de lecteur: el./mech. Conduire: 0,75 kW, 400 V Remarque: portatif Poids: 50 kg La machine est en bon état et immédiatement prête à l’emploi et peut être visitée et démontrée avec nous. Nous serions heureux si notre offre trouve votre intérêt. Erreurs, modifications et ventes préalables exceptées.

Scie circulaire à froid usagée Numéro de machine interne m3331 Fabricant Kaltenbach Type TL 500 Numéro de ma.14238 Année de construction inconnue Poids: env. 350 kg Lieu où se trouve l’objet : 58730 Fröndenberg/Ruhr La machine peut être visitée et essayée sous tension. Nous serons heureux de vous envoyer d’autres photos par e-mail. Un chariot élévateur/grue pour le chargement est disponible. La vente préalable est réservée. Il est possible d’examiner de manière experte les articles à vendre sur place. Les questions spécifiques doivent être clarifiées à l’avance. Les informations, telles que les données techniques e.B, les dimensions, l’année de construction, l’état sont non contraignantes et ont été démontrées au meilleur de nos connaissances et croyances. Les erreurs sont donc réservées. La garantie / garantie est exc ...

saw blade diameter: 425 mmcutting diameter: 130 / 140 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 260 x 80 mmcutting speed: 11 / 22 m/mincapacity 45 degrees: flat: 180 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmwork height max.: 1050 mmDrive: 1,6 / 2,5 kWweight of the machine ca.: 1160 kgdimensions of the machine ca.: 1,25 x 1,2 x 1,9 mCondition: ready for operation: Video available on our website.: Electric 380 Volt: Cooling equipment: Chip protect bonnet: saw blade: 400 mmSemi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice.Semi-automatic operation means:1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material.Infeed roller conveyor 2000 mm and discharge roller conveyor with sto ...

saw blade diameter: 315 mmcutting diameter: 95 mmcutting capacity - round: bei 90° / 95 mmcutting capacity - square: 95 x 95 mmcutting capacity - round: bei 45° / mmcutting capacity flat: 140 x 80 mmcutting capacity - square: 45° / mmsaw blade speeds: 33/60 p. min.Drive: 1,3/1,8 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 700 x 1000 x 2050 mmCondition: ready for operation: Electric 400 Volt: Cooling equipment: Roller conveyor with measuring stop: 3000 mmSemiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition. ...

saw blade diameter: 400 / 425 x 40 mmcutting diameter: 40 - 180 mmcutting speed: 14/28 m/mincapacity 90 degrees: flat: 260 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: flat: 180 x 80 mmwork height max.: 1050 mmvoltage: 400 Vtotal power requirement: 5,0 kWweight: 1170 kgrange L-W-H: 1230 x 1205 x 1980 mmFurnishing:- semi-automatic underfloor saw- with miter adjustment, swiveling left / right- hydraulic, vertical & horizontal clamping device- large work table- stepless feed from the saw blade- saw blade- machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcutting diameter: 100 mmdimensions of saw-blade: 350 x 2,5 x 32 mmheight of material-table: 900 mmcutting speed: 38/76 m/mincapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 170 x 90 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 125 x 90 mmcapacity 45 degrees: square: 90 x 90 mmcapacity 60 degrees: round: 90,0 mmcapacity 60 degrees: flat: 90 x 90 mmcapacity 60 degrees: square: 90 x 90 mmclamping range: max. 170 mmtotal power requirement: 1,8 / 2,4 kWweight of the machine ca.: 500 kg.dimensions of the machine ca.: 1200 x 600 x 2200 mmThe KASTOradial U 10 is a semi-automatic vertical circular saw with twoCutting speeds and steplessly adjustable saw feed for theuniversal use in workshop and production. The machines stands outthrough precise dovetail guides, robust gears and largecutting area. The ea ...

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mm: 10-40 mm: 10-40 mm: 40x10-40 mmcapacity 90 degrees: square: 10-80 mmweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.