sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 706)
Overview This bottle washer was manufactured in 1999 by Italian company BODINI (model 201-10/66-11V). The machine is used for lemonade and syrup applications and has been maintained every 6 months by the owner. It remains in production until February 2026, where it can also be visited. After production stop, it will become available for removal. Technical data Capacity: 4,500 bph Formats: 1 L 75 cl 33 cl Dimensions: 6.7 m × 2.2 m 0.5 m conveyor ≈ 2 m height Heating system: Electric heating system, 165 kW Power consumption: 160 kW with electric resistance 10 kW otherwise Air supply: 5 bar
Overview This pallet stretch wrapping machine with conveyors was manufactured in 2012 by Not provided Tosa Group Bande Releuse. The machine is designed to secure palletized loads with stretch film for transport and storage. The system applies controlled film tension to ensure load stability and protection during handling and logistics operations. The machine is currently stopped (idle for one year) and remains installed and operational. Technical data Capacity: 25 pallets/hour Application: Pallet stretch wrapping Configuration: Stretch wrapping machine with integrated conveyors
Overview This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data Manufacturer: Officine Pesce S.n.c. Model: PG 97/M4 Year: 2005 Voltage: 220V Frequency: 50Hz Filling system: Semi-automatic Components: Accumulation tank Filling tap Electromechanical valve Bottle-holding plates Capping unit Control panel Pedal-operated mechanism
Overview This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time. Technical Details Type: Isobarometric filler for bottles and cans Capacity: 8,000 bottles / hour (depending on format) Number of filling valves: 20 Formats: Bottles: 0.33 L Longneck and 0.75 L Cava Cans: Standard 0.33 L and 0.44 L Counter-pressure filler Running direction: left - right Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m Operating History: In operation: June 2021 – June 2024 Last production run: June 2024 Dismantled: February 2025 Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) Good condition, ready for reinstallation.
- Ideal assessment of the filterability and the quality of the filtrate- Longer total service life of the membrane filter cartridges through pre-filtration and targeted determination of the regeneration intervals- Reduction of downtime during filling due to perfect pre-filtration- Enables optimum choice of cartridge filter systems due to pilot tests- Polluting load analysis of service media (rinse water, steam condensate)- Easy handling and cleaning of the device- Variable filtration pressure- High flexibility due to a separate container for liquid to be filtered- Display of all measured data from archive- Ethernet interface for data downloadSPECIFICATIONS:Max. volume: 1.43 gal (5.4 l) Operating pressure: 0 – 43.5 psi (0 – 300 kPa, 0 – 3 bar)Membrane diameter: 1.85 in (47 mm)Membrane, pore size: 0.45 µm; 0.65 µmMax. temperature of medium: 176 °F (80 °C)Max. ambient temperature ...
Aperçu : Fabriqué en 2004 par la société allemande Dr. Datz Maschinenbau GmbH, ce capuchon fiable à 24 têtes de fil est conçu pour sceller de façon sécurisée les fermetures de fil de fer des bouteilles. Une machine de haute qualité fabriquée en Allemagne, idéale pour des opérations de capuchon efficaces et précises dans les lignes d’embouteillage. Détails techniques : Fabricant : Dr. Datz Maschinenbau GmbH Type : BVM 24R Année de fabrication : 2004 Nombre de stations de bouchon : 24 Type de fermeture : Fermetures de balles en fil Direction de la machine : De gauche à droite
Aperçu L’étiqueteuse a été construite en 2009 par le fabricant italien PE Labellers. La machine est en bon état, déjà démontée professionnellement et stockée dans un entrepôt. Techn. Détails Capacité : 12 000 bph Adapté pour : 1,0L et 1,5L Sens de fonctionnement : entrée gauche – sortie droite (sens antihoraire) Nombre de têtes d’étiquetage : 12 Position de l’étiquette : enveloppe Matériau de l’étiquette : OPP avec thermofusibilité Entraînement machine à fondre : Siemens S7 Bouteilles traitées et outils de formatage incluant : 0,25L – 0,50L – 1,0L
Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...
Overview This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data Air operating pressure: 5.5 – 8.5 bar Water operating pressure: 3 – 5 bar Condensate operating pressure: up to 10 bar Operating temperature: 4 – 70 °C
Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...
Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing. The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as ...
Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...
Table collectrice rotative avec tête d’entraînement et moteur d’entraînement, réglable, 0,75 kW. tables d= 1000 mm. dans le sens des aiguilles d’une montre Plus de 300 machines neuves et d’occasion sur notre seema .de
Y compris un régulateur de vitesse et un pied. Sans ceinture. 0,75 kW Plus de 300 machines neuves et d’occasion sur notre seema .de
Recherche d’une qualité d’impression rapide et optimaleÉcran tactile plus lumineux et plus clairBloc de circulation d’encre amélioréFonction d’arrêt automatiqueFonctionnement convivialPlus de 300 machines neuves et d’occasion sur notre seema .de
Füller 4 Ventilemotor für Vakuum Edelstahlausführung Plus de 300 machines neuves et d’occasion sur notre seema .de
Réservoir en acier inoxydable horizontal, chauffant et isolé avec manomètre de pression, soupape de sécurité, indicateur de niveau, conduite de nettoyage et vannes. Titre additionnel : horizontal, isolé, pour sucre liquide, Volume : 20800 l, Pression de fonctionnement : 1 bar, Température de fonctionnement : 20 °C, Matériau : acier inoxydable, Position : horizontale, Caractéristiques : manomètre isolant, soupape de sécurité, indicateur de niveau de remplissage, tuyaux de nettoyage, vannes
Overview This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles
Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...
Overview This atmospheric filling monoblock with crown capper was manufactured in 2017 by Spain Cespedes. The machine is designed for bottling beer or other non‑carbonated beverages in 330 ml glass bottles. The equipment combines a gravity filling system with an integrated crown capping unit. The machine is in good condition and is currently not in use. It is being sold due to an upgrade to a higher‑capacity model from the same manufacturer. Technical data Capacity: approx. 900 – 1,200 bottles/hour Formats: 330 ml glass bottles Application: Bottling of beer or other non‑carbonated beverages Configuration: 8 gravity filling valves, 1 crown capping head Neck finish: Crown cap Ø26 mm Utilities: 400 V / 50 Hz Dimensions: approx. 2,260 x 850 x 2,250 mm Weight: approx. 900 kg
Übersicht Diese halbautomatische CIP-Anlage wurde 2018 vom slowenischen Unternehmen SKRLJ DOO hergestellt. Ausgestattet mit zwei 500-Liter-Tanks ist die Anlage für effiziente Cleaning-in-Place-Prozesse in der Getränkeherstellung konzipiert. Mit Dampfbeheizung, integrierten Sonden und SPS-Steuerung bietet sie einen zuverlässigen Betrieb und eine hygienische Reinigung für kleine bis mittlere Brauereien und Getränkehersteller. Das System ist komplett aus Edelstahl gefertigt und wird mit isolierten und beheizten Tanks geliefert. Technische Daten Leistung: 2 × 500-Liter-Tanks Heizung: Dampfheizung Pumpe: 1 × Sanitärkreiselpumpe
Overview This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time. Technical Details Capacity 28,800 bottles per hour 1,200 crates per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65,50mm Total height: 206,30mm Crates Formation 6x4 Length crate: 400mm Width crate: 300mm Height: 255mm Box inlet direction: transverse Electrcial connection: 400/ 230V, 50Hz, 15 A
Overview This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise bottle infeed/outfeed parallel on one side of the machine
Aperçu Le remplissage a été construit en 2007 par la société allemande Krones. La machine a été régulièrement entretenue, est encore assemblée et peut être inspectée à tout moment. Détails techniques Puissance : 40 000 bph (200 ml) Formats : bouteille en verre de 200 ml Bouteille en verre de 237 ml Fermeture : bouchon à couronne Direction du flux : sens horaire Hauteur d’entrée/sortie : 1 150 mm +- 50 mm Points de remplissage : 96 Points de bouchon : 15 Diamètre du cercle de pas : 2 880 mm Pas : 94 mm Système de contrôle : Siemens S7 Consommation d’énergie : 15,17 kW
Overview The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details Output: 16,000 - 20,000 bph Formats: 0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line
Aperçu : Le rinçeur nettoie et stérilise les récipients et a été fabriqué en 2000 par le fabricant allemand Krones. La machine a déjà été démontée et mise en stockage. Détails techniques Capacité : jusqu’à 32 000 conteneurs/h Nombre de stations de rinçage : 50 (certaines manquantes) Direction de fonctionnement : sens antihoraire Conteneur : verre + plastique Pièces humides dans V2A Lubrification centrale Documentation étendue disponible Commande électropneumatique de vannes Contrôle Siemens S7 Tension : 400 / 230 V Frequance : 50 Hz Tension de contrôle : 24 V DC
Ligne complète d’embouteillage PET CSD – 12 400 BPH Fabrication : 2008–2009 | Lieu : Allemagne | Disponible : octobre 2026 Cette gamme complète d’embouteillage en PET (CSD (boissons gazeuses gazeuses) est conçue pour une production efficace et fiable de boissons gazeuses. La gamme est composée d’équipements européens de haute qualité provenant de grands fabricants tels que SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac et TwinPak. Le système est actuellement toujours en production, garantissant un excellent état opérationnel et des possibilités de démonstration immédiates. Données générales de lignes Capacité nominale : 12 400 bouteilles/heure Capacité effective : environ 10 000 bouteilles/heure Tailles des bouteilles : 0,5 L 0,75 L 1,5 L Type de bouteille : Bouteilles ROT en PET Types de casquettes Flat Cap : PCO 1881 ...
Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V
Aperçu La machine a été construite en 2008 par l’ancien fabricant SIG Corpoplast (aujourd’hui KHS). La machine est toujours en service et peut être inspectée à tout moment. Données techniques Capacité : derniers 21,115 bph (à 1,5 l) Formats : 500 ml, 750 ml, 1 000 ml, 1,500 ml PCO 1881 Tension de fonctionnement : 400 V/ 50 Hz Tension de contrôle : 24 VDC Champ d’application Machine à moulage par soufflage | SIG Corpoplast | BLOMAX 12 | Alimentateur de préformes 2008 | Transver AG | - | Chute de tri de l’ascenseur Silo 2008
BEVMAQ GmbH
