sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 706)
Direction de travail : gauche-droite ; Une seule tête. Direction de fonctionnement : Gauche-Droite Alimentation électrique kW : 420 Plus de 300 machines neuves et d’occasion sur notre seema .de
Soupapes de remplissage : 40 capacité/heure environ : 10000 Tête de bouchon : 8 direction de fonctionnement : droite-gauche (CCW) Plus de 300 machines neuves et d’occasion sur notre seema .de
Pour le ruban adhésif ci-dessous. En option sur le dessus - étanchéité entièrement automatique, entraînement de collage : - moteur d’entraînement pour courroies d’alimentation - bras pneumatique pour fermer le couvercle Plus de 300 machines neuves et d’occasion sur notre seema .de
Gamme complète d’embouteillage en verre pour remplissage à chaud et à froid (Krones / KHS) Capacité : jusqu’à 33 000 bouteilles/heure (bouteilles en verre de 500 ml) YOM : 1999-2007 - de nombreuses améliorations, voir ci-dessous ! Le système offre une flexibilité maximale, permettant le remplissage à chaud, à froid, les boissons calmes et gazeuses, ainsi que plusieurs tailles de bouteilles. Important : Le remplissage peut également être utilisé pour les bouteilles PET, offrant une flexibilité de production supplémentaire. Données techniques clés Types de bouteilles Bouteilles en verre (non retournables) Les bouteilles PET peuvent aussi être remplies Tailles des bouteilles 250 ml – 1000 ml Produits Jus de fruits (orange, pomme, tomate, etc.) Boissons chaudes Boissons à remplir à froid Boissons gazeuses (CSD) Types ...
PÂTEURISATION ET EMBOUTEILLAGE DU LAIT FRAIS UTILISÉ Composé de : Séparateur de crème de lait Marque : Seital Modèle : SE13X Capacité : 2500 l/h Année de fabrication : 1993 Échangeur thermique à plaques - pasteur flash - Marque : KMA Modèle : K21-FS/4273 Capacité : 2500 l de lait de 8°C à 75°C Année de fabrication : 1998 Pompe centrifuge Marque : Südmo Valve à disque manuelle et pneumatique, amatures, manomètre, capteur de pression, etc. Homogénéiseur Marque : Niro Soavi Modèle : NS 3018-H Capacité : 2500 l/h Année de fabrication : 1998 Haute pression : 150 bar Quantité de piston : 3 Réservoir d’équilibrage en acier inoxydable, capacité d’environ 50 l avec dessus ouvert, couvercle et reposant sur trois pieds avec robinet de sortie. Valve à disque et amatures actionnées manuellement et pneumatiques. Système de ...
5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute
1 Combi-Filter Seitz, type Orion 100 Year of construction: 1982 Output: 100 hl/h complete with beer pump, conductivity measurement, dosing vessel, Control cabinet, switching panel, KG collecting pan with conveyor and disposal pump., Filterarea kieselguhr appr.: 35 m², Filtration capacity: 100 hl/h, Length: 5200 mm, Width: 1320 mm, Height: 2250 mm, Formats: 1 m x 1 m filter plates, Material: Stainless steel, Position: Horizontal, Base construction: Frame filter, Features: Hydraulic filter compression; altguhr conveyer: up to 200 Filter sheets or 55 kieselguhr plates and 56 filter sheets
2 réservoirs verticaux en acier inoxydable de la société Chema Process Engineering GmbH Année de construction : 1991 Contenu : 180 hl pression max : 4 bar Matériau : acier inoxydable avec isolation et revêtement en tôle, Titre additionnel : 2 pièces, Volume : 180 hl, Pression autorisée : 4 bar, Température autorisée : 25 °C, Pression d’essai : 4 bar, Poids : 2220 kg, Matériau : acier inoxydable, construction de base : avec réservoir vertical avec fonds et pieds de tuyau déguisés, isolation et revêtement en tôle, caractéristiques : bouche d’égout à coquille, buse pour échantillonnage
Réservoirs de pression horizontaux en acier inoxydable avec gaines de refroidissement, lunettes de visée, tuyaux de sortie et manomètres. Titre additionnel : réservoirs de pression en acier inoxydable horizontaux et refroidissables, Volume : 1050 l, Puissance maximale surpression de travail : 3 bars, Longueur : 2300 mm, Largeur : 860 mm, Hauteur : 860 mm, Matériau : acier inoxydable, Position : horizontale, Caractéristiques : chemise de refroidissement, tuyau de sortie DN50, lunettes de visée, manomètre
Ce système d’inspection des caisses vides a été construit en 2019 par le constructeur allemand Indspect. La machine est en production jusqu’en octobre 2025. Capacité des données techniques : Réglable pour l’inspection des caisses vides dégradées
Bottling line for approx. 5000 bottles/h, Additional title: returnable glass bottle filling, years of construction 1990 - 2016, Capacity: 5000 bo/h, Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l, Position: free standing, Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank
Aperçu La gamme de remplissage pour l’emballage à pignon a été fabriquée en 2008 par la société norvégienne Elopak. Il se compose d’un remplisseur de carton, d’un applicateur de bouchons et d’un emballeur. La conduite de remplissage est toujours installée, mais n’est plus connectée. Cependant, il peut être inspecté en personne. Détails techniques Capacité : 8 000 cartons/h Formats : 0,5l 0,75l 1,0l Heures d’ouverture : 32 500 Champ de livraison Remplisseur de cartons aseptiques | Elopak | S-PS80HA | Applicateur de capsules 3x 2008 | Elopak | PLA-S30 | Emballeur de plateaux 2009 | OYSTAR A+F | Traypacker TF | 2011
This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...
Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...
Volume : 20800 l, Pression de fonctionnement : 1 bar, Température de fonctionnement : 20 °C, Matériau : Acier inoxydable, Position : horizontale
6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible., Additional title: stainless steel tanks with temperature control, Total capacity: 2429 hl, Max. pressure 4 Tanks: 0 bar, Max. pressure 2 Tanks: 5 bar, Material: stainless steel, Position: vertical, Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet, Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding , Periphery: own temperature control
Overview This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3
- Vertical fermentation tank with a capacity of 152.60 hl. Insulated, clad and equipped with overflow spout, jacket cooling zone and sampling tap. - Vertical fermentation tank with a capacity of 161.27 hl. Equipped with overflow spout, jacket cooling zone, yeast plug, spray head and lighting fixture. - Horizontal pressure tank with a capacity of 155.00 hl and a pressure capacity of 4.4 bar. Insulated and equipped with cooling zone, thermometer, safety valve, pressure gauge, sampling tap, hose level indicator and 2 spray heads. - Mobile yeast tank with a capacity of 8.00 hl and jacket cooling. - Temperature control., Additional title: stainless steel tanks for wheat beer fermentation, Total capacity (gross): 465 hl, Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control
Homogénéiseur à un seul étage, utilisé pour les suspensions en houblon avec une taille de particule de 1 μm. L’intégration dans un système de contrôle de niveau supérieur est possible via un échange de signaux. Le moteur était contrôlé via un FI externe, Titre additionnel : homogénéisation haute pression, Plage de capacité approximative : 1800 l/h, Pression : 250 bar, Taille des particules cellulaires : 1 μm particule cellulaire, Longueur : environ 2,2 m, Largeur : environ 2,5 m, Hauteur : environ 1,9 m, Fonctionnement / Contrôle : Intégré dans un contrôle de procédé ProLeit, le moteur était contrôlé par un convertisseur de fréquence externe. Fonctionnalités : CIP, SIP
Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system
Aperçu : Ce pasteuriseur à chambre a été fabriqué en 2020 par la société allemande RICO. La machine est conçue pour des procédés de pasteurisation et était auparavant en service dans une brasserie. Le matériel n’est plus requis par le vendeur et peut être visité à tout moment sur demande. Données techniques Application : Pasteurisation Configuration : Pasteuriseur à chambre 4x1, installation intérieure
This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays
Aperçu : Le remplissage atmosphérique a été fabriqué en 2016 par le fabricant italien GAI et utilisé dans une brasserie belge. Détails techniques Capacité : 6 000 bouteilles/h Formats 330 ml Nombre de valves : 16
This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip sw ...
Overview This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997
The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology
Overview The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours
These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...
- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...
Overview The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C & 2900bph 15°C 1500ml - 2000bph 4°C ...
Seegräber GmbH
