sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 706)
Overview This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...
Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz
Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system
Overview The empty bottle inspector was built in 2004 by the German manufacturer Miho, designed for quality control in filling lines. The machine was running until January 2025 and is now stored in the company. Technical details Output: 25,000 bph Working direction: Left - right Last used for: 330 ml Longneck glass bottles (green) 330 ml Longneck glass bottles (brown) 330 ml Steinie glass bottles 330 ml Swing top glass bottles 500 ml NRW glass bottles Inspection modules Bottom inspection Sealing surface inspection Side wall inspection Residual liquid and residual caustic detection
Overview This centrifuge was manufactured in 2019 by Alfa Laval. The CLARA 250 is designed for beer processing in beverage production. The machine is still installed and can be visited in production on request. It is available immediately. Technical data Capacity: 80 HL/h – 150 HL/h Application: Beer Operating hours: 1,800 h
Overview The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope Depalletizer with lift and discharge at the bottom With intermedeiate layer remover and magzine With slide for top layer/cover Enclosed conveyors can pull off single lane wise for shaped bottles Incl. protective fences, pallet transport, discharge table
The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection. Technical details Capacity (beverage volume): 6.000 - 36.000 l/h Dosing rate: up to 20 ml Velcorin / hl Flow meter Endress + Hauser Further details against request.
Overview This automatic steam generator was manufactured in 2018 by German company Certuss. The Junior TC-300 is a gas-powered instant steam generator designed for reliable and efficient steam production. With fast startup capability and high efficiency, it is well-suited for breweries and beverage production plants. The equipment is available immediately and comes with essential accessories, including a water treatment plant and control components. Technical data Capacity: 300 kg/h Pressure: up to 10 bar Power: 218 kW Efficiency: 91% Heating: Gas-powered Startup time: max. 5 minutes Control: PLC
Overview This robot-palletizer was built in 2014 from German manufacturer Kuka. The machine has 2 different gripping heads for the handling of KEG´s and plastic crates. It´s equipped with 6 axes and is in a good condition. The machine was serviced every year and dismantled in 2025. Technical Details Capacity Depend on layer formation Equipped for the handling of: KEG´s Modul crates
Overview This case packer was manufactured in 2020 by German company Mühlbauer. The machine is in excellent condition, has been well maintained, and is immediately available for sale due to discontinuation of use. It is ready for immediate operation and suited for various bottle and crate formats. Technical data Capacity: 8,000 bottles/hour Formats: 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle module crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle module crate 0.33 l Vichy bottle / 24-bottle module crate Machine condition: Very well maintained, ready to use Scope of Delivery Bottle packer Mühlbauer Satelite EP-0400-T
Overview This self-adhesive labelling machine was manufactured in 2011 by the German company KRONES. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. We dismantled it properly and store it in our warehouse. Technical data Labelling method: Self-adhesive Capacity: Up to 42,000 bottles/hour Number of Autocol stations: 6 Bottle formats: 0,25 l Heineken 0,33 l Heineken Food 0,65 l Heineken 0,33 l Desperados 0,65 l Desperados
Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...
Overview This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h
Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...
Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition. Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L) Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) Application: CSD Hygienic design condition: good technical con ...
Overview The following 2 component mixer was built in 2000 by the German manufacturer Krones. The machine is available immediately in its current good condition. Technical data capacity 45,000L/h 2 components Anton Paar densimeter suitable for carbonated drinks year of manufacture: 2000 SIEMENS control
Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...
Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats: Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l Steinie 0,33l
Overview This Auxiemba Gacela RSA 9-III-IZ is a self-adhesive labeling machine manufactured in 2000. It was used for labeling cava (champagne) bottles with a capacity of 6,000 bottles per hour and can be adapted for wine bottles (8,000-10,000 bottles per hour). The machine has already been dismantled and stored. All technical documentation is available. Technical details Capacity: 6,000 bottles per hour for cava 8,000-10,000 bottles per hour for wine Labeling stations: 3 heads (front, back, neck label) Possibility of retrofitting a fourth head Label infeed: 3 double roll unwinding stations with splicing function Electrical specifications: Voltage: 3 x 380V Frequency: 50 Hz Power: 20 KVA
Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details Output: up to approx. 35 cans per minute (depending on product) Formats: 330 ml & 440 ml standard cans (202) Filling system: 6-head filler Closure: double seam seamer for 202 ends Voltage / power supply: not specified Special features: Retrofitted rinser and dryer (Vigo UK) Pneumatics converted to metric connections Original operating instructions available Scope of delivery 1 × Can filling line | ABE | CraftCan35 | 2017 Incl. rinser and dryer (retrofitted) Optional: Stain ...
Overview This cold glue labelling machine was manufactured in 2010 by the Italian company Kosme S.r.l. The model Extrafix 504/6 SC2 E3 is designed for labelling of glass beer bottles using cold glue technology. The machine was in production until January 2025, is now stored and ready for shipment, and remains in good operational condition. Technical data Capacity: 6,000 bottles per hour Formats: 0.33 L (long-neck bottles) Neck finish: 26 mm crown cork Label Type: Cold glue (paper labels) Status: Stored, ready for shipment Condition: Previously in production until January 2025
Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling un ...
Kerzenfilter 1-fach Code 41Anzahl Kerzen: 01Adaptertyp: Code 41 - 3 Verschlussnasen und 222 O-RingenMore then 300 machines new and second hand on our seema .de
ohne Kette, ohne Füße, ohne AntriebMore then 300 machines new and second hand on our seema .de
Rinser 20-stelligMore then 300 machines new and second hand on our seema .de
Cooling unitMore then 300 machines new and second hand on our seema .de
Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999
Overview This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L
Overview This tank package was manufactured in 2002 by Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage depending on their configuration. The set is offered as three packs, each consisting of one 20,000 L fermentation tank, one 15,000 L storage tank, and one 10,000 L storage tank. On request, single packs can also be purchased. All tanks are made of AISI 304 stainless steel and are in good condition. Technical data Fermentation tanks - 200hl (3 units): Capacity: 20,000 L Diameter: 2,500 mm Cylindrical height: 4,000 mm Type: Atmospheric with cooling jackets Storage tanks - 150hl (3 units): Capacity: 15,000 L Diameter: 2,500 mm Cylindrical height: 3,000 mm Type: Atmospheric Storage tanks - 100hl (3 units): Capacity: 10,000 L Diameter: 2,000 mm Cylindrical height: 3,000 ...
Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine. Technical details Capacity: 3.600 bph 3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm space requirement approx. 9x5 m² weight: 4,5 t Operating hours: 19.935 Bottles Volume: 250 ml - 2500 ml Max. Diameter: 110 mm Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).
