sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 706)
Réservoir vertical en acier inoxydable avec divers raccords. Titre additionnel : réservoir vertical, Volume : 3158 l, Pression maximale autorisée : 0,5 bar, Température maximale autorisée : 110 °C, Matériau : acier inoxydable, Position : verticale, Construction de base : réservoir cylindrique à têtes plates
Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet
Storage tanks with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets, Additional title: Vertical, coolable stainless steel tanks, Gross volume: 8300 l, Operating pressure: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1800 mm, Height: approx. 4030 mm, Material: Stainless steel 1.4301, Position: vertical, Base construction: 4 x pipe feet, Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping
Réservoir de fermentation avec deux fonds défoncés. - 4 cuves de 52 hl de butto chacune - 2 cuves d’une capacité brute de 79 hl chacune, titre additionnel : réservoirs verticaux en acier inoxydable, volume total : 7900 l cuve de stockage 2 pièces, pression de fonctionnement chacune : 0,9 bar, température de fonctionnement : 20 °C, largeur : environ 1400 mm, hauteur : environ 4100 mm, matériau : acier inoxydable 1.4310, position : verticale, construction de base : 4 x pieds de tuyau, réglable en hauteur, caractéristiques : Passage-d’étoile latérale ; la tuyauterie CIP ; Vanne de sortie (vanne papillon)
Réservoir de transport de bière dans un conteneur maritime, avec tête de pulvérisation CIP et bouche d’égout. Comprend un système de dosage (débit maximal : 120 l/min). Titre additionnel : Réservoir de pression en acier inoxydable logé dans un conteneur, Capacité : 7200 l, Pression de fonctionnement : 2,5 bar, Température de fonctionnement : 20 °C, Longueur : 7,25 m, Largeur : 2,4 m, Hauteur : 2 m, Caractéristiques : contrôle, pompe, enrouir de tuyau, débitmètre, tambour de câble, raccords, tête de pulvérisation CIP, bouche d’égout
Réservoir en acier inoxydable avec revêtement, monté sur un châssis de transport., Titre additionnel : Réservoir horizontal en acier inoxydable revêtu, Capacité : 4000 l, Pression : 0,99 bar, Longueur : 3,25 m, Largeur : 1,4 m, Poids : 600 kg, Matériau : acier inoxydable, Position : horzontal, Construction de base : châssis de transport, Caractéristiques : isolant, entrée DN 50, sortie DN 40
filtre mobile kieselguhr de Velo, titre supplémentaire : avec éléments de filtre verticaux ; année de fabrication vers 2005, Surface du filtre environ : 5 m², Cos φ : 0,69, Vitesse de rotation : 1656 1/min, Puissance : 0,55/0,66 kW, Courant : 2,98/1,71 A, Tension : 230/480 V, Fréquence : 50/60 Hz, Longueur : 2,30 m, Largeur : 1,30 m, Hauteur : 1,80 m, Poids : 1000 kg, Caractéristiques : avec récepteur, mélangeur, unité de puissance et contrôle
Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting
Système de dosage Kieselguhr pour la filtration des boissons. Composé d’un réservoir de mélange, de pompes et de divers autres composants. Titre supplémentaire : Système de dosage comprenant un réservoir de mélange, des pompes et d’autres équipements, Capacité : 25000 l/h, Volume du récipient : 500 l, Puissance : 2,42 kW, Tension : 220/380 V, Fréquence : 50 Hz, Matériau : acier inoxydable, Position : verticale, Caractéristiques : agitateur, viseur, indicateur de niveau, pompe de pré-couche (80 hl/h contre 2 bar), Pompe doseuse à piston (36 hL/h contre 8 bar), couvercle articulé, fumigation au dioxyde de carbone, dispositif d’extraction de poussière
Système de filtres construit avec des éléments filtrants empilés horizontalement. Une fois la filtration terminée, le kieselguhr est expulsé du récipient par force centrifuge. Capacité : 140 hl/h, Volume du réservoir : 26 hl, Longueur : environ 4000 mm, Largeur : environ 2000 mm, Hauteur : environ 3500 mm, Matériau : Acier inoxydable 1,4541 (récipient), Construction de la base : sur pieds, Caractéristiques : Récipient doseur Kieselguhr avec pompe doseuse ; des pompes ; Raccords, technologie de mesure
Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.
Overview This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery Stret ...
Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack confi ...
Overview This self-adhesive labelling machine was manufactured in 2011 by the German company KRONES. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. We dismantled it properly and store it in our warehouse. Technical data Labelling method: Self-adhesive Capacity: Up to 42,000 bottles/hour Number of Autocol stations: 6 Bottle formats: 0,25 l Heineken 0,33 l Heineken Food 0,65 l Heineken 0,33 l Desperados 0,65 l Desperados
Overview This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data Capacity: 8,000 bph at 1,5 l Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery Blow moulder: SIPA, year 2002 Compressed ...
Overview This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors
Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling un ...
Overview This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temp ...
Overview This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data Capacity: 10 hL brewhouse, up to 2 batches per day Formats: Beer, up to 20° Plato initial density Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) Power supply: 5.5 kW Air supply: 6 bar Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra ...
Overview The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C & 2900bph 15°C 1500ml - 2000bph 4°C ...
