Fabricant:
(Catégorie: 101)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diamètre de la broche : 130 mmcourse x : 3500 mmcourse y : 2500 mmaxe z : 1250 mmaxe W (axe longitudinal de la broche) : 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 puissance totale requise : 37 kWpoids de la machine env. : tdimensions de la machine env. : mATC 40 positionsProtection desécurité Liquide de refroidissement
Key data: 350 mm, 250 mm, 200 mm
• Fraiseuse Brother – Centre d’usinage TC 31 (2 pièces, fig. 1) Année de fabrication : 2007 Débattement X : 350 mm Débattement Y : 250 mm Débattement Z : 200 mm Vitesse de la broche : jusqu’à 22 000 tr/min Cône de broche : BT30 Table de travail : 500 x 270 mm Wz – Magazine : 26 places Particularité : Table conçue comme un changeur rotatif, support de serrage de chargement via un magasin et un robot ABB
Montage sur broche MK 3 Capacité de perçage dans l’acier : 30,0 mm Pompe à liquide de refroidissement
x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmtotal power requirement: 46 kWweight of the machine ca.: 15 trequired space: 5.5x3.0x2.8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Contrôleur de broche FRSGJ-2-5,5-B-N , Moteur de broche AC SJ-VL 5,5-05 , Servo variateur MR-S1-80-E01 , Servomoteur FRSFJ/SGJ-2-5,5K./,5K MC 713/727 , MC161-1 , MC303 , MC301 , MEM_AMC433
Course x : 4.000 mmCourse y : 2.100 mmCourse z : 1.000 mmcône ISO : ISO 50 Nombre de tours : 5.000 tr/minTaille de la table : 4.020x2.010 mmPoids de la table : 12.000 Kg Contrôle : Heidenhein iTNC530 Place des outils : 32 fachtaverse rapide : 15.000 mm/minPuissance totale requise : kWPoids de la machine env. : 39 tdimensions de la machine env. : 10680x5600x5100 m
Spécifications: Diamètre du foret : 1,5 - 3 Porte-mandrin de perçage : B16 Course de la broche : 50 mm Projection : 150 mm Diamètre de la colonne : 46 mm Puissance du moteur : 350 W Raccordement : 230 V Dimensions (LxPxH), env. : 220 x 450 x 590 mm Poids, env. : 55 kg Équipement: - Pied usiné avec rainures en T - Mandrin à pignon
Capacité de perçage acier/GG : env. 25 mm Montage de l’axe : 2 MK Projection : 300 mm Dimensions de la table : 305 x 380 mm Course de la plume : 115 mm Vitesses de la broche : 200 - 1200 tr/min Moteur d’entraînement : 380 V, 1/1,5 kW Espace requis : 800 x 400 x 1800 mm Poids : env. 280 kg
bore capacity in steel (diameter): 40 mmthroat: mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 35 mmthroat: 1000 mmworkpiece height max.: 200 - 1400 mmheight adjustment: 745 mmbase plate surface area: 1200 x 930 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mmturning speed range: 60 - 1850 U/minfeed range: 0,09 - 1 mm/Upower capacity: 3,7 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 mCube table 800 x 800 x 650 mmCoolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 640 mmy-travel: 600 mmz-travel: 500 mmcontrol: Siemens 840 D total power requirement: 19 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 5 x 4 x 3 mNo. 5312:Vertical machining center DECKEL MAHO type DMC 64 V linearyear of construction 2007Siemens 810 D ShopmillWorking area: 640 x 600 x 500 mmDrive power: 13/19 kWEquipment:Table 850 x 600 mm ( WITHOUT the clamping devices shown )Preparation 4th axisProduction package / IKZ 40 bar:BFA 600 cooling lubricant cleaning systemIntegrated spiral chip conveyorSeparate scraper belt chip conveyordocumentationMiscellaneous:Spindle ISO 40Speed range 1-12,000 min-1Space requirement see sketchTransport dimensions approx. 6.5 loading metersWeight approx. 8.8 tonsThe machine is ready for operation with wear and tear due to age and use.Short video: https://www.youtube.com/watch?v=sDkgx4BYXeYSpecial price ex works EXW - free loaded ...
bore diameter: 65 mmthroat: 380 mmControl: PLC-Steuerung bore spindle turning speed range: 63 - 1600 U/mintable-size: 630 x 500 mmrapid traverse Z-axis: 4,75 m/minboring feeds:: 0,05 - 0,56 mm/Utotal power requirement: 9 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 1,50 x 1,20 x 2,95 mDrilling capacity in steel ST60: 65 mmDrilling capacity in cast iron GG20: 80 mmThread cutting ST60: M68Thread cutting GG M72SPS-controlled automatic drilling machine withDrilling/deep hole drilling/thread cuttingSequence:1st rapid traverse to start position2. switch on the speed3. switch on the drilling feed4. drilling until the drilling depth is reached5. return in rapid traverse to start positionManual operation possible (speed anddirection of rotation, rapid traverse positioning,Switching the drill feed on/off)Selection of the drill feeds and spindle speedmanually via gear shift.Pole ...
spindle diameter: 102 mmx-travel: 1600 mmy-travel: 1250 mmz-travel: 1600 mmspindle taper ISO: 50 bore spindle stroke: 710 mmmain drive motor: 11 kWturning speeds: 1600 U/minFeed: 4000 mm/minControl: Heidenhain type: TNC 135 T-slot - width: 22 mmT-slot - distance: 140 mmtable surface area: 1250x1400 mmTable load: 2500 kgtotal power requirement: 23 kWweight of the machine ca.: 9,3 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mmx-travel: 2750 mmy-travel: 2000 mmz-travel: 2330 mmspindle taper ISO: 50 bore spindle stroke: 1000 mmturning speeds: 900 U/minFeed: 2500 mm/minControl: Heidenhain type: TNC 131 T-slot - width: 28 mmtable surface area: mmTable load: 8000 kgtotal power requirement: kWweight of the machine ca.: 37,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °spindle turning speed range: 12,5-900 U/minControl: Heidenhain type: 155 table surface area: 1800x1600 mmTable load: 12000 kgspindle taper ISO: 50 width of T-slots: 22 mmT-slot - distance: 160 mmFeed: 1-6000 mm/mintable rotating: 360 °angular milling head: total power requirement: 80 KVAweight of the machine ca.: 36 tdimensions of the machine ca.: 7,7x7,2x4,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mmx-travel: 3000 mmy-travel: 1600 mmz-travel: 1250 mmControl: Heidenhain type: TNC 426 table surface area: 2000x1600 mmTable load: 12500 kgRotary table: 360 °spindle turning speed range: 12-3000 U/minFeed: 1-9999 mm/minRapid movement: 10000 mm/mintotal power requirement: 80 KVAweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 360 mmbore stroke: 200 mmthread capacity: 33 Mspindle taper MT: 4 MKcolumn diameter: 175 mmbore spindle turning speed range: 61-1169 U/mintable-size: 550x550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 70 mmthroat: 420 mmbore stroke: 260 mmthread capacity: 50 Mspindle taper MT: 5 MKcolumn diameter: 220 mmbore spindle turning speed range: 51-966 U/mintable-size: 600x600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 100-2000 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 132-1852 U/mintable-size: 420x400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 160 mmthread capacity: 30 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 75-2100 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1050 mm: 600 mm: 600 mm: 1200x600 mm: ISO 40 : 12.000 U/minMotor Capacity: 7,0/10,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm: 1275 mm: 1330 -: MK 5 bore depth: 270 mmspindle turning speed range: 44-1206 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacité d’alésage en acier (diamètre) : 23 mmgorge : 310 mmcourse d’alésage : 150 mmvitesses de tournage : 90 - 2000 U/min : 420 x 360 mmpuissance totale requise : kW / Voltpoids de la machine env. : 650 Kgdimensions : 1,2 x 0,8 x 2,4 mmPerceuse d’établi- Rotation gauche/droite- Advance- Châssis de base
bore capacity in steel (diameter): 50 mmthroat: 385 mmbore stroke: 240 mmtable surface area: ø 500 mmspindle taper MT: 5 spindle turning speed range: 40 - 800 U/minfeeds: 0,1/0,14/0,2/0,28/0,4 mm/Ucolumn diameter: 220 mmdistance between table/spindle: max. 670 mmdistance spindle/base plate: 1180 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of machine L x W x H: 1,5 x 0,75 x 2,4 mAccessories: drill chuck, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1300 x 600 mmspindle taper: SK 40 spindle turning speed - stepless: 10.000 U/minATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 8,8 tdimensions of machine L x W x H: 2,58 x 3,04 x 2,35 mAccessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1500 mmy-travel: 800 mmz-travel: 700 mmtable surface area: 1760 x 700 mmspindle taper: SK 40 spindle turning speed - stepless: 8000 U/minspindle drive: 15 kWfeeds: 1 - 8000 mm/minrapid traverse X/Y/Z axis: 15 / 15 / 12 m/mintable load: max. 2500 kgspindle throat: 760 mmATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 12,5 tdimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m- with coolant through spindleAccessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- geometrical overhauled in 2022 -- new ball bearing spindle installed on Y-axis in NOV. 2022 -- the magnetic plates shown on the photo are not included -The data for this ad was created with ModulMWS - the software solution o ...
x-travel: 710 mmy-travel: 630 mmz-travel: 500 mmtable surface area: 1100 x 585 mmrotary table dia.: 500 mmspindle taper: SK 40 spindle turning speed range: 5 - 6300 U/minspindle power: 11 kWno. of tools in magazin: 2 x 22 control: HEIDENHAIN, TNC 426 total power requirement: 20 kWweight of the machine ca.: 5,8 tAccessories: various tool holders, probe RENISHAW OMP 60, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 1100 mmworkpiece height max.: ca. 1000 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 28 - 2500 U/minfeeds: 0,05 - 2 mm/Uquill stroke: 300 mmdistance basic plate - spindle nose: 630 - 1380 mmcrossrail adjustment vertical: 750 mmtotal power requirement: 6 kWweight of the machine ca.: 4 tdimensions of machine L x W x H: 2,74 x 1,14 x 2,59 mm- with thread cutting attachment -Accessories: box table 550 x 550 x 550 mm, vice, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
