Fabricant:
(Catégorie: 101)
spindle diameter: 100 mmx-travel: 1600 mmy-travel: 1120 mmz-travel: 1250 mmtable surface area: 1250 x 1250 mmspindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/minfaceplate turning speed range: 7,1 - 224 U/minfaceplate diameter: 600 mmtable load: 4000 kgmain drive motor: 11 kWmax. travel of spindle: 900 mmtotal power requirement: 15 kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6 x 3,1 x 3,1 mOverhauled/Modernized in 2003- DRo Heidenhain- Faceplate with slideThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- ULTIMAX 4 control- toolchanger for 24 tools- coolant through spindle- chip tank- electronical hand wheelTechnische Daten / technical details:Verfahrweg X / X-Travel 610 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 610 mmTischgröße / table size 760x510 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 fachEilgang / rapid feed 30 m/minGewicht der Maschine ca. / weight 4700 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of L ...
contrôle : FANUC 18i MB Nombre d’essieux : 4 St.x - course : 710 mmy - course : 610 mmz - course : 650 mmb - axe : 0,001 taille de la palette : 500x500 mm, magasin de la pièce d’outil avec : 60 broche de fraisage : BT40 vitesse de rotation de la broche - sans escalier : 15000 U/convoyeur minchip : kWmisc. accessoires : poids de la machine environ : 15 tdimensions de la machine environ : 5,1 x 3,7 x 3,1 m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
X-course : 800 mmy-Course : 600 mmz -Course : 500 mm, puissance totale requise : kW-poids de la machine ca. : tDimensions de la machine ca. : mLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Capacité d’alésage en acier (diamètre) : 22 mm Gorge : 270 mm Vitesse de rotation de la broche - sans escalier : U/poids minimum de la machine environ : 1,1 tdimensions de la machine environ : 1,2 x 1,2 x 2,2 m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Capacité d’alésage en acier (diamètre) : 40 mm Gorge : 230 mm course d’alésage : 130 mmtaper MK : 4 MK Taille table : 400 x 315 mm : mm/Vitesses de retournement : 105 - 1257 U/min Puissance totale requise : 2,55 KWpeso de la machine environ : 0,35 tDimensions : 0,8 x 0,6 x 1,95 m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Contrôle : NCT taille de la table : 700 x 500 mmRefroidisseur : ja Cylindre d’outil : SK 50 2 dispositifs de serrage à 20 positions Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
spindle diameter: SK 30 mmx-travel: 420 mmy-travel: 240 mmControl: Heidenhain TNC 355 total power requirement: 10 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 5356Vertical drilling and milling machineFEHLMANN Picomax 51 CNC 3Working area: 420 x 240 x 120 / 450Drive: 4 kWControl: Heidenhain TNC 355Table 720 x 280 mm / 120 kg loadSpindle holderSpeed range 55 - 9,000 min-1Space requirement approx. 3 x 2 x 2.4 mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 102 - 2000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mCompact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmControl: FANUC 31i-B spindle turning speed - stepless: 15000 U/minspindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kWpallet table size: 500 x 500 mmworkpiece weight: 500 kgdistance spindle center to table: 80 - 810 mmRapid Travel X / Y / Z-Achse: 60 m/mindimension of workpiece: 800 x 1000 mmtotal power requirement: 80 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,45 x 2,68 x 2,88 mHorizontal CNC machining centre- CNC control FANUC 31i-B- Tool changer 60-fold (BT 40 Big Plus)- 2 pallet changer(pallet 24-M16)- Table / Pallet indexing Full B axis.- Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m.- Coolant/Filtering Unit- Chip Conveyor- ExhausterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Profondeur d’alésage : 500 mm. Surface de table : - Vitesse de la broche de mm : 1 dimensions de la machine. : - mmxmmxmmmm poids : - tLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-travel: 1140 mmy-travel: 710 mmz-travel: 610 mmCNC-control: Heidenhain TNC640 table-size: 1300 x 700 mmmax. table load: 1000 kgspindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/minfeed stepless: max. 10.000 mm/minrapid traverse: 24/24/24 m/mindrive capacity - spindle motor: 7,5 / 11 kWtool change unit: 30 Pos.coolant: IKZ 40 bar chip conveyor: kWvoltage: 400 Vtotal power requirement: 25 kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 3,25 x 3,08 x 3,00 m- Serial No.: 4P11152J1- TSC 40 bar incl. 600 liter coolant tank with paper band filter unit- Y-Axis with 4 liear guide rails!- X- and Z-Axis with 6 roller supports for each axis!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.060 mmy-travel: 610 mmz-travel: 610 mmcontrol: Winmax 9 (Upgrade)table-size: 1.270 x 610 mmmax. table load: 1.100 kgnumber of T-slots: 5 T-slot - width: 18 mmT-slot - distance: 100 mmturning speed range - milling: ~ 10.000 U/minpower capacity - milling spindle: 18 / 11 kWtool taper: SK 40 Tool changer: 24 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 120 mmmax. tool length: 300 mmmax. tool weight: 7 kgfeed: ~ 15,4 m/minrapid traverse X-axis: 30 m/minrapid traverse Y-axis: 30 m/minrapid traverse Z-axis: 20 m/minweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,5 x 3,2 x 3 mChip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - VerticalHURCO VMX 42The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 830x320x1660 mmWeight: 56 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 570x870x1710 mmWeight: 143 kgTotal power requirement: 1,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacité d’alésage dans l’acier (diamètre) : 32 mmgorge : 265 mm course d’alésage : 150 mm cône MK : 3 MKtaille de la table : 390 x 390 mmavances : mm/vitesses de rotation : 100 - 3300 U/minpuissance totale requise : 1,5 KW poids de la machine env. : 0,35 tdimensions : 0,8 x 0,6 x 1,95 mMachine d’affichage inutilisée avec :- Accessoire de coupe de filetage- Vitesse de broche variable- Système de refroidissementLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-travel: 980 mmy-travel: 630 mmz-travel: 630 mmControl: iTNC 530 total power requirement: 10 / 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 442,5 mEquipment:Electronic handwheelOperating mode 4Manual swivel milling headMotor spindle 12,000 rpmSK 40 / Clamping DIN 6987232-position tool magazineRigid table 1250 x 700 mmChip conveyorCoolant deviceSpecial price for collection ex works / EXW foundation EXW D-63110 RodgauList price ex warehouseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-Travel : 700 mMy-Travel : 420 mmZ-Travel : 610 mmTaille de la table : 1260 x 490 mm Cône de broche : HSK E50 Plage de vitesse de tournage de la broche : 36000 U/minTool Unité de changement : 42 Poids de la machine env. : 5 tHEIDENHAIN TNC430Liquide de refroidissement à travers spindlewww.marcels-maschinen.ch Les données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
bore capacity in steel (diameter): 45 mmquill stroke: 125 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmspindle turning speed range: 75 - 3200 U/minmax. milling cutter diameter: 80 mmspindle taper: ISO 30 max. distance between table and spindle-nose: 460 mmthroat: 230 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 580 Kgdimensions of the machine ca.: 1,2 x 1,0 x 2,1 mEquipment:All axes with 3-digital display.Quill travel has separate digit display.Automatic feed in X-axis and quill.Motorized Z-axis.tapping device.coolant system.machine base.Collet set, SK tool holder.Further machine accessories in box.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vboring feeds:: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
