subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...
turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 510 mmturning diameter over slide rest: 310 mmcentre distance: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mm3-jaw chuck (diameter 250mm)tool holder devicetail stock 3x steady restTechnische Daten / technical details:Spitzenweite / center to center 2000 mmUmlaufdurchmesser über Bett / rotary diameter over bed 510 mmUmlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mmSpindelbohrung / spindle hole 52 mmDrehzahlbereich / spindle speed 44-2240 UpM /rpmGewicht der Maschine ca. / weight ca. 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mmswing diameter: 3300 mmturning height: 2200 mmworkpiece weight: 15000 kgvertical adjustment of the crossrail: 1600 mmturning speed range - faceplate: 1 - 90 U/minmain drive motor: 60 kWram head swiveling: +/- 35 °ram head - cross travel: 1200 mmram head - vertical travel: 720 mmfeed range: 1 - 3000 mm/minControl: FANUC 0i-TF total power requirement: ca 70 kWweight of the machine ca.: 41 tdimensions of the machine ca.: 4,8 x 4,8 x 5 mComplete overhaul in 2026- CNC FANUC 0i-TF- 1 ram on crossbeam- 4 clamping jaws for face plate- CE-- mechanical overhaul of all components (adjustment of the geometricalparameters of the machine according to ISO 3655)-- Grinding of the guides-- New telescopic covers-- FANUC main motor-- new electrics and CNC control-- new Fanuc servomotors-- ball screws dia. 50mm-- new hydraulicsThe data for this ad was created with ModulMWS - the ...
faceplate diameter: 5000 mmswing diameter: 8000 mmturning height: 4000 mmram head dimension: 360 x 360 mmfaceplate turning speed range: 0,6 - 60 U/minworkpiece weight: 160 tmain drive motor: 2x 70 kWcontrol: FANUC total power requirement: - kWweight of the machine ca.: 85 tdimensions of the machine ca.: -- mThe machine will be overhauled and modernised (upon order) and fitted with:- Fanuc CNC control system (latest model)- New electrical system- New hydraulic components: pumps, lubrication systems, hoses, valves, etc.- All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary.- 2 rams supports on the crossbeamCROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE)- Axial ram travel (Ram stroke) — 2500 mm- Horizontal carriage travel — 3400 mm- Swivel angle / Tiltability — 15 - 45°- Cross-rail travel (Arm travel) — 3600 mm- Saddle travel — 6500 mmSIDE TOOL HEAD- ...
faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 2060 mmworkpiece weight max.: 18000 kgfaceplate turning speed range -stepless-: 1,02 - 92 U/minrapid traverse of cross-rail: 2500 mm/minslide adjustment: 2400 mmmain drive motor: 60 kWControl: Fanuc 0iTF total power requirement: 75 kWweight of the machine ca.: 62,8 tdimensions of the machine ca.: 6,6 x 5,8 x 5,4 mOverhauled/modernized in 2026- Complete replace of hydraulic & lubrication installation- New ball screws installed- Replace of electric installation and of command- Mechanical elements retrofitted and grinding of guideways(adjustment of the geometrical parameters of the machine according to ISO 3655)equipped with:- CNC control FANUC 0iTF- FANUC Drives and MotorsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 540 mmturning length: 1020 mmcontrol: FANUC 18 i-TB swing diameter: mmbar diameter: 65 mmtravel -x axis: 555 / 185 mmtravel -y axis: 160 mmtravel -z axis: 1095 mmtravel -z axis (sub spindle): 1065 mmspindle speed:: 5000 / 5000 1/minspindle bore: 76 / 76 mmC-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/minDriven Tools: 4.000 U/minb-axis: 240 °rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 24 m/mindrive capacity - spindle motor: 22 / 22 kWvoltage: 400 Vtoolpiece magazine: chain magazine: 40 Pos.tool taper: HSK-A 63 milling drive: 15 kWdriven Tools: 5,5 kWtotal power requirement: 60 kVAweight of the machine ca.: 12,5 tdimensions of the machine ca.: 4,30 x 2,30 x 2,90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 190 mmturning length: 620 mmcontrol: Fanuc 18 iT max. bar diameter through the spindel: 65 mmnumber of controlled axis: 9 y-axis: +/- 45 mmturning speed range: 4500 U/minpower capacity: 15/11 kWrapid speed: m/minswivelling range: +/- 91 ° Gradnumber of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/minSpindelpower on driven tool: 5,5/3,7 kWtail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: mweight of the machine ca.: 12,5 tCNC- lathe with sub spindle- 2 turrets, universal for main.- or sub- spindle- upper turret switchable- Y- axis on upper turret- both turrets with 12/24 positions- collet chucks on main- and sub spindle- chip conveyor- parts catcher typ A - few toolingsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm,• 4-jaw chuck Ø 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pasaje de husillo 120 mm Tres mordazas, tipo mandrilla 250mm Multi ix Tipo B Dispositivo de intervención Alimentación eléctrica en el soporte superior Carrera de la punta de la pala trasera 200mm La máquina fue revisada eléctrica y mecánicamente y equipada con un interruptor de emergencia y protección de chip de husillo La máquina ha funcionado durante 5572 horas desde entonces Accesorios: Una vez cerrada, Lynette Dos portadores centrales de números Auction-ID: A1-50529-7
turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAAccessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, ...
turning diameter: 3200 mmfaceplate diameter: 2800 mmturning height: 1600 mmControl: Siemens 840 dsl workpiece weight: max. 16.000 kgDimensions (L/W/H): 5.500 x 6.450 x 4.900 mmweight - pallet system: 43.000 kgMax. turning diameter: 3,200 mmTable diameter: 2,800 mmMax. turning height: 1,600 mmMax. workpiece weight: 16,000 kgTable speed: 70 rpmNumber of table speed ranges: ConstantVertical travel, Z-axis (ram stroke): 1,100 mmHorizontal travel, X-axis: 1,720 mmWorking feed range: 2–2,000 mm/minRapid traverse X/Z: 7 m/minCross rail travel speed: 360 mm/minMain motor power: 55 kWTotal installed power: 69 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 500 mmswing dia.: 800 mmturning diameter over bed: 450 mmturning length: 800 mmx-travel: 360 mmz-travel: 980 mmspindle turning speed range: 3200 U/minmax. torque on the spindle: 235/939 Nmspindle bore: 110 mmturret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m- Machine with C-axis and driven tools- 2 driven tool holders- 10 static tool holders- Incl. SMW 3-jaw chuck 315BB- Measuring arm- Chip conveyor- Incl. additional high-pressure pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 900 mmturning length: 1600 mmcontrol: Fanuc 21iTB swing dia.: 1030 mmswing diameter over cross slide guide: 800 mmx-travel: 470 mmz-axis: 1650 mmspindle motor: 37/45 kWspindle turning speed range: 0 - 1800 U/mintransmission ratio: 3 max. torque on the spindle: 5423 NmTurret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mmtailstock quill stroke: 150 mmchucking diameter: 530 mmtotal power requirement: 68,6 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: 5,8 x 2,8 x 2,6 m- CNC Control Fanuc 21i-TB- LNS- C-axis 360° (0,001°)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
x-travel: 150 mmy-travel: +/- 30 mmz-travel: 620 mmchucking diameter: 165 mmMain Spindle:: spindle speed:: 6000 U/minspindle motor: 11 / 7,5 kW2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWTurret: 3x 15 Stckc-axis: 0,0001 °y-axis: +/- 25 mmControl: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/mintotal power requirement: kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4120×2130×2815 mHorizontal lathe with main and counter spindles- Muratec Fanuc 32i-TB CNC control- Main and counter spindles-- 2x C-axis- Tool turret (3x) with Y-axis,-- 15 stations each (BMT 44)-- Powered tools on all stations, 8 kW, 6,000 rpm- Finished part gripper- Conveyor belt- Bar feeder interface- Coolant system, separate 200-litre tank- Cooling unit- High pressure to turrets 1–3 via M-function: 15 bar/40 l/min- Chip conveyor- TransformerOnly approx. 500 ...
turning diameter over bed: 2300 mmturning diameter over slide rest: 1100 mmturning length: - mmfaceplate: 2000 mmcentre height: 1180 mmmax. workpiece weight -without tailstock: 4 tspindle diameter in front bearing: - mmspindle turning speed range: 1- 99,9 U/minfeed: 0,06 - 19,98 mm/Urapid traverse: 2,3 m/mintotal power requirement: 37 kWweight of the machine ca.: - tdimensions of the machine ca.: 5,2 x 5,8 x 2,63 mequipped with:- face plate- Bed support with 4-point Tool Holder- Coolant system- Feed/chip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 4500 mmswing diameter: 6000 mmturning height: 3500 mmControl: Siemens 840D distance between columns: 6500 mmcolumn: max. travel: 19000 mmtable load: 63 tonstable rotation speed: 0,63 - 63 U/mincross-rail support horizontal: 7500 m/mincross-rail support vertical: 2500 m/minclamping table: 8000 x 5000 x 350 mmtable load capacity: 25.000 kg/qmram head dimension: 460 x 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGANTRY – Double-column milling and turning centre with movable columnRetrofitted and modernised in 2009- Siemens 840D CNC control- Drilling and milling unit, speeds 25 – 2,500 rpm- Workpiece table 8,000 x 5,000 mm- Rotary table/face plate 4,500 mm- Angular milling headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 700 mmturning length: 3074 mmcontrol: Mazatrol Matrix Smooth X : 91 mm: JIS A2-11 : 4000 1/minspindle motor: 30 / 22 kWPositioning speed: 12000 1/minmilling spindle drive: 24 / 22 kW: 845 mm: 430 mm: 3126 mm: -30 / +210 °Feeds (X,z,u,w-axis): 360 °: HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/mintailstock quill taper MT: 5 total power requirement: 77,73 kVAweight of the machine ca.: 25,5 tdimensions of the machine ca.: 7,3 x 3,4 x 2,95 m- Mazatrol Smooth X CNC control- 5-axis lathe- 36-position tool changer- IKZ / spindle cooling- Standard tool set (HSK T100) included- C-axis 0.001°- Tailstock- Milling head with milling spindle speed of 12,000 rpm-- B-axis 240° (-30° / +210°)- Smw 5.1 fixed tailstock (range 85–350 mm)- Kitagawa 21 3-jaw chuck- Renishaw RMP60 wireless probe- Engraving function, thread cutting, thread start compensation, tool length ...
500 € 
