subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 108)
: neu : ca. 2 - 4 Wochen ab Auftr : 4400 €: 2400 x 1200 mm: 850 mm: 8000 kg: 945 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...
: gebraucht : 2468D : prompt, Zwischenverkauf v : Deutschland : 2970 €: 1 : 1890 €: 195 kg: 28 mmDEMO SET / MINT CONDITIONconsisting of: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 3x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 020157 : prompt, Zwischenverkauf v : Türkei : 6320 €: 121.98 €: 1 : 250 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operat ...
: neu : ca. 2 - 4 Wochen ab Auftr : 3420 €: 2000 x 1000 mm: 850 mm: 8000 kg: 712 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...
Sistema de soldadura robótica de doble estación de trabajo, construido en 2007, compuesto por robot KUKA, máquina de soldar INE, controlador KUKA KR C2, estructura de soporte de acero para suspensión robótica, posicionadores motorizados, armario de control y componentes de servicio. El sistema lleva la marca CE de fábrica y está completo con manuales y documentación técnica disponibles. El robot funciona, actualmente está apagado desde hace unos meses por falta de uso. Se recomienda la verificación/revisión por parte de personal técnico cualificado antes de volver a poner en servicio. Sistema grande, adecuado para carpintería metálica y soldadura automatizada en doble estación de trabajo. Auction-ID: A7-47032-1
: neu : ca. 2 - 4 Wochen ab Auftr : 2697 €: 2000 x 1000 mm: 3000 kg: 348 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2000 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...
Detalles técnicos Fabricante: CEM Modelo: PBF 26P Tipo: Máquina de soldadura por puntos con resistencia neumática Potencia: 25 kW Ciclo de trabajo: 20% Configuración: - Sistema accionado por pedales - Brazos de soldadura dobles de cobre - Actuación neumática - Electrodos y brazos refrigerados por agua Equipamiento: - Pedal de pie - Controles ajustables del ciclo de soldadura - Controles de amperaje ajustables - Sistema de refrigeración y ventilación Aplicación: Soldadura por puntos por resistencia de componentes de chapa metálica en entornos industriales de fabricación y taller Condición: Usada Auction-ID: A7-40834-5
Con 5 metros. Succión de articulaciones, repuestos de desgaste disponibles Auction-ID: A1-46862-19
incluyendo accesorios Auction-ID: A1-46862-23
Con accesorios, mesa y dispositivo de tiro SK1 Auction-ID: A1-46862-18
200 € 
