subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 706)
Format Parts Bottle Diameter : 57,71,76,94,115mm
- with 2 cap conveyors (BVS 30x60 and MCA 28)- incl. cap control unit- 3 sets of format parts complete incl. screw conveyors 1x0.75 litre round ? 75 mm, 1x1.0 litre round ? 90 mm, 1 x 0.25 litre round ? 57 mm
- Year of construction: 1990- Frame height: 3200 mm- For pallets: 800 x 1200 mm and 1000 x 1200 mm- Depalletising head: With clamping slats- Large bottle table: 1350 x 1900 mm- Bottle collation on single-lane conveyor L: 3000 mm
- with 6 plates- with 2 labeling stations (front- and back label) for self-adhesive labels
Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) ...
Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic do ...
Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available
Resumen Esta fábrica cervecera 20HL fue construida en 2014 por el fabricante español INOX DUBRA. Se puede visitar en cualquier momento. Detalles técnicos Mosto implacable: 20 HL Calentado a vapor Cuadro eléctrico para controlar ambas bombas y temperatura de calefacción Apertura manual de válvulas Cámara 2 vasos Cámara de 2 vasos Depósito de agua 3300L con refrigerador Intercambiador de calor Accesorios con diferentes mangueras, dos bombas, etc.
Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) bottles.The system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,00 ...
Estaremos encantados de visitarte y planificar tu máquina. Además, la adaptación de transportadores de botellas en caja puede ser realizada por nosotros. También podemos fabricar nuevas cabezas de agarre.
Estaremos encantados de visitarte y planificar tu máquina. Además, la adaptación de transportadores de botellas en caja puede ser realizada por nosotros. También podemos fabricar nuevas cabezas de agarre.
Rico 2 cabezas empaquetadoras para 2 x 6 cajas de vino 2 x 6
Año de paletización Pack - Tec 2019 6, 12, 20 cajas. Requisito de espacio reducido
Lavadora de botellas Krones fabricada en 2001 676-039 6000 botellas/h botellas 0,2L-1,0L La máquina estará disponible en diciembre de 2026
Arandela de caja con cinta transportadora inclinada Estaremos encantados de planificar tu máquina, y el cambio, complementando la tecnología de transportes
La máquina está en muy buen estado y también se pueden conducir botellas de tapa abatible Soporte 0,5l 0,5l Euro 0,33l Longleg
Inspector pesado para 0,5l Euro 0,5l Soporte 0,33l Botella Longleg La máquina puede ser programada por nosotros y la entrega de botellas ajustable.
Lavadora de botellas Klinger también para botellas de tapa abatible. La máquina puede ser planificada y configurada por nosotros. También podemos suministrar tecnología adicional de cintas transportadoras
Overview This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...
Overview This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery 1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler ...
Overview This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles
Overview This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)
Resumen El relleno fue fabricado en 2007 por la empresa alemana Krones. La máquina ha sido revisada regularmente, sigue montada y puede ser inspeccionada en cualquier momento. Detalles técnicos Salida: 40.000 bph (200 ml) Formatos: botella de vidrio de 200 ml Botella de vidrio de 237 ml Cierre: tapa de corona Dirección del flujo: en sentido horario Altura de entrada/salida: 1.150 mm +- 50 mm Puntos de relleno: 96 Puntos de tapado: 15 Diámetro del círculo de paso: 2.880 mm Paso interior: 94 mm Sistema de control: Siemens S7 Consumo energético: 15,17 kW
Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours. Tech Specs: Capacity: 695 crates (of 12 bottles) per hour 1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)
