subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
turning diameter: 340 mmturning length: 600 mmturning diameter over slide: 300 mmcontrol: Siemens 840 D spindle passage: 55 mmspindle nose: ASA 6 number of spindle speeds: 4000 U/minspindle motor: 27 kWNumber of tools: 12 VDI 40driven stations: 12 VDI 40speed of driven tools: U/minpower of driven tools: kwrapid traverse: 30 m/minSpindlespeed subspindle: U/minpower sub spindle: 15 kwrange L-W-H: mweight of the machine ca.: tCNC- lathe with driven tools an subspindleDriven toolstation cannot be used due to cable breakage- chip conveyor- sub spindle- driven tool stations (not working)- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diámetro de giro: 200 mmlongitud de giro: - mmcontrol: DMG potencia total requerida: kWpeso de la máquina aprox.: 5200 kgdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
diámetro de torneado: 246 mmlongitud de torneado: 445 mmcontrol: Fanuc 32 potencia total requerida: kWpeso de la máquina aprox.: 4250 kgdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
turning diameter: 830 mmswing diameter: 920 mmturning height: 750 mmcontrol: Fanuc 0i-TF travel -x axis: 495 mmtravel -z axis: 780 mmturning speed range - spindle: 1940 U/mindrive capacity - spindle motor: 37 / 30 kWchucking diameter: 380 mmturret (x-stations): 12 posrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 20 m/minfeed: mm/minspindle diameter in front bearing: 160 mmc-axis: 360° (in 0,001°) workpiece weight: 870 kgtotal power requirement: 61,78 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 2,1 x 2,7 x 3,6 m- Control unit FANUC 0i-TF- Tool Turret 12-fold- Coolant system- Foot switch- Automatic safety switch Front door & full enclosure- Work area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC turning diameter over slide: 880 mmturning diameter over bed: 1220 mmtail stock: M80 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmspindle turning speed - stepless: 0 - 1000 U/minspindle motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mcomplete retrofit in 2020- CNC Control Fagor 8055 TC- Tool holder turret:SAUTER model 0.5.320.025, vertical axis- Chip Conveyor- 4-jaw chuck Ø1000 mm- 3-jaw chuck Ø500 mm- Steady Ø500 mm- Movable bezel Ø250 mm- Special bar for machining very long interiors- CoolantRETROFITTING IN 2020• Grinding of carriage guides on the X and Z axes• Preloading of X and Z axis ball screw nuts• New Turcite placed on the X and Z axis carriages• General review and disassembly of the engine and head regulator• General review ...
Diámetro de la placa frontal: 5500 mmDiámetro de giro: 6000 mmAltura de torneado: 4400 mmVelocidades de giro: - U/minMotor de accionamiento principal: - kWControl: FAGOR 8055 Peso máximo de la pieza: 100 Carrera de desplazamiento a cada lado: 1500 mmCarril transversal - Ajuste: 3000 mmPotencia total requerida: - kWPeso de la máquina aprox.: - tDimensiones de la máquina aprox.: - mequipado con:- Control CNC 8055- 1ram en travesañoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmturning speeds: U/minmain drive motor: 70 kWControl: FAGOR 8070 workpiece weight max.: 20 tcolumn daylight: 3300 mmmilling motor: 16 kWfeeds crossrail-slide vertical: 3000 mm/minfeeds crossrail-slide horizontal: 3000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC Control FAGOR 8070- C-axis (angular positioning of the table)- angular milling Head- Telescopic covers of the cross rail and columns guideways- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diámetro de giro: mmlongitud de giro: 300 mmdiámetro de giro sobre la corredera de la bancada: mmpotencia total requerida: kWpeso de la máquina aprox.: 0,4 tdimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
diámetro de torneado: 950 / 650 mmlongitud de torneado: 2000 / 2500 mmcontrol: HEIDENHAIN Manual Plus Diámetro del mandril de 3 mordazas: 800 mmrango de velocidad de torneado: 40 - 1000 U/minpotencia total: 35 kWpeso de la máquina aprox.: 12 tdimensiones de la máquina aprox.: 8 x 3 x 3,5 m12 x estación TorretaContrapunto2 x Transportadores de virutasPrecio EXW 17036 NeubrandenburgLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
turning diameter: 320 / 270 mmworkpiece length - max.: 620 mmcontrol: Mazatrol Smooth swing diameter: 300 / 172 mmworkpiece weight: kg------------ MAIN SPINDLE ------------: turning speeds: 5000 U/minpassage of spindle: 76 mmc-axis: 0,0001 spindle motor: 15 / 11 kWspindle nose: A2-6 travel -x axis: 175 / 111 mmtravel -y axis: 100 / 70 mmtravel -z axis: 520 / 580 mmrapid travel x/y/z: 30 / 26 / 40 m/min2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle nose: A2-5 spindle passage: 61 mmw-axis: 625 mmbar capacity: 65 mmtotal power requirement: 39,2 kVAweight of the machine ca.: 9,1 tdimensions of the machine ca.: 2,87 x 2,3 x 2,4 mHighly efficient CNC turning centre with 2 turrets / 2 spindles for driven tools and long Y-axis travel- Smooth CNC control- Main & counter spindle- 2 tool turrets-- 12-station tool turret (2x)-- Spindle for rotary tool: spi ...
turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mandril de planeado y mandrinado de precisiónWMWA 100 - 4 ( A100-4 )TGL 32680 ( TGL32680 )Dimensiones: 210 x 100 x 85 mm
