subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 376 mmturning length: 1245 mmcontrol: Siemens 828D greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 2800 U/minspindle drive motor: 22/18,5 kWspindle nose: ASA A2-11 spindle bearing diameter: 160 mmspindle bore: 115 mmbar material dia.: 102 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 24 St.travel -x axis: 260 mmtravel -z axis: 1350 mmtravel -y axis: 105 (+/- 52,5) mm2nd Spindle:: spindle turning speed range: 4500 U/minspindle motor: 7,5/5,5 kWspindle passage: 62 mmspindle nose: ASA A2-5 total power requirement: 59,5 kVAweight of the machine ca.: 7,9 tdimensions of the machine ca.: 4,4 x 2,1 x 2,2 mEquipped with:- Siemens 828D control system- Chip conveyor- Counter spindle- Workpiece holding arm- High-pressure coolant pump- 12-position turret, 7.5 kW, 5000 rpm- Arm for measu ...
: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 960 mmswing diameter over bed slide: o: 860 / u: 730 mmturning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000equipped with a turret for driven tools as well as tailstock.The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mandril de planeado y mandrinado de precisiónWMWA 100 - 4 ( A100-4 )TGL 32680 ( TGL32680 )Dimensiones: 210 x 100 x 85 mm
Herramienta de mandrinado, cepillado y cabezal de mandrinadoPAGUSMK4Diámetro del soporte de la barra de perforación: 25 mmen caja de maderausado, probado !Dimensiones: 390 x 210 x 230 mm
Plancha automática, rectificadora de ejes, MAE-25RH, 1996, usada Fabricante: Maschinen- & Apparatebau Götzen GmbH, Alemania Carga conectada: 14,5kva, Dim.: 2,5 x 1,5 x 1,8 m, Peso: 5000 kg
This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details.
Key data: 500 mm, 1000 mm, 2500 1/min
Lathe Voest Alpine Steinel WNC 500 S x 1000 Diámetro de giro 500 mm Longitud de giro: 1000 mm Sistema de control Sinumerik 810 T-GA 2 Caja de cambios de 2 etapas i = 4 Potencia: 37 KW al 100% de ED Par máximo durante las curvas: 1450 Nm Manual del contrapunto con sujeción y acoplamiento Velocidad máxima 2500 rpm Volante electrónico Para fresado: servomotor hidráulico giratorio de 720 Nm y máximo 18,5 rpm Torreta de disco de 12 velocidades con herramientas accionadas, máximo 3000 rpm a 4 kW Portaherramientas VDI 40 Muchos portaherramientas VDI 40 para mecanizado interno y externo, así como para herramientas accionadas, ¡incluyendo algunas herramientas, por ejemplo, aceros de torneado interno o sin herramientas!
Este Weiler E50 se fabricó en 2009. Una robusta máquina de torneado horizontal con un diámetro de giro sobre la cama de 570 mm y un diámetro de husillo de 83 mm. Ofrece una cama de 350 mm de ancho y una sección transversal de la herramienta de torneado de 32 x 25 mm. Ideal para operaciones de giro precisas y eficientes. Contacta con nosotros para más información sobre esta máquina.
Este centro de torneado EMCO E45 se fabricó en 2019. Cuenta con un eje KK5 con una capacidad de manubrio de 45 mm y un rango de velocidades de hasta 6300 rpm. La torreta de herramientas VDI30 de 12 posiciones soporta 6 herramientas accionadas, aumentando la versatilidad. Equipado con el control SINUMERIK 828D OPERATE para operaciones precisas y un diseño robusto con transportador de astillas y sistema de refrigeración de alta presión. Contacta para más información sobre esta máquina.
