子类目
(三级类目)
生产厂家:
(品类: 706)
制造商：Weightpack S.r.l.，意大利明尼苏达州戈伊托 型号：WSFC 32/24/6 – 141 NH ESL 序列号：WL 0289 制造年份：2010年 类型：高卫生乳制品旋转灌装管线 版本：ESL – 延长保质期 32个消毒站 24个加油站 容量： 使用H₂O₂进行容器灭菌 精确的体积或重力灌装技术 1升格式最大12,000升/小时（见上图）->实际生产量为7,0 00 l/h
瓶洗机O + H Contina E44C / 302-110型 制造年份：1995年 输出容量大约3万次/小时 包括西门子S7 PLC控制系统 包括人机界面触摸面板 包括全自动瓶子运输系统 包括集成安全系统和紧急制动 包括电气控制柜 该机器由不锈钢制成，非常适合可回收玻璃瓶。 该机器仍在德国生产至2026年11月。
酿造系统配备470升麦汁壶和500升劳特调桶。 供暖为电加热，供暖功率为21千瓦。供暖在墙壁和地 上 命令。酿酒厂的产量最高为74%。原始重力可酿造至18 柏拉图 . 两器酿酒厂，由糖化罐/麦汁壶组合和 劳特顿/漩涡船。糖化槽下方是高效 泵将麦汁混合，并通过软管在设备间传递。 可以在这里运输。 配方管理、自动糖化程序、定时器和手动功能 操作模式通过配备7英寸触摸屏的控制系统操作。 内置的板式换热器用于重新注浆准备，使得使用自来 成为可能 直接达到所需温度，并通过劳特槽盖上的喷嘴 直接且温和地。无需额外准备热水。 内置的管状热交换器用于麦汁冷却，位于 装上了冲泡锅。 该热交换器可利用淡水将热麦汁从96°C加热到96°C，仅 需30分钟。 ...
Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging
Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...
Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.
Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...
Overview This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...
CSD PET完整装瓶线 – 12,400 BPH 制造时间：2008–2009 |地点：德国 |可下载时间：2026年10月 这条完整的碳酸饮料（CSD）PET装瓶线旨在高效且可靠 碳酸饮料生产。该产品线由SIPA、GEA Procomac、Arol、SMI、PE拉贝勒斯、Ventilo、Robopac和TwinPak 领先欧洲制造商的高品质设备组成。 该系统目前仍在生产中，确保了良好的运行状态和即 演示的可能性。 通用线路数据 名义容量：12,400瓶/小时 有效产能：约10,000瓶/小时 瓶装： 0.5升 0.75升 1.5升 瓶型：圆形PET瓶 电容类型 平盖：PCO 1881 运动帽：Aptar PCO 1881 主要设备 吹塑部分 吹塑机：SIPA – 8腔系统 瓶子作 空气输送机：GEA Procomac 瓶子输送系统：GEA Procomac 瓶子烘干机：Ventilo 填充与闭合 Rinser：GEA Procomac 带有ClO₂ ...
热灌装和冷灌装玻璃的完整系列（Krones / KHS） 容量：每小时最多33,000瓶（500毫升玻璃瓶） 年限：1999-2007——多次升级，详见下文！ 该系统提供最大灵活性，支持热装、冷装、静态和碳 饮料，以及多种瓶装容量。 重要提示： 该填充剂也可用于PET瓶，提供额外的生产灵活性。 关键技术数据 瓶型 玻璃瓶（不可退货） PET瓶也可以装满 瓶子容量 250毫升至1000毫升 产品 果汁（橙子、苹果、番茄等） 热灌饮料 冷饮 碳酸软饮料（CSD） 封顶类型 28毫米铝帽 33毫米铝制旋断帽 43毫米铝制旋断盖 （包括旋转式封盖机） 标签选项 用冷胶粘纸标签 可选套筒标签系统 包装 包裹式纸盒（整盒） 托盘包装 （无收缩箔工作站） ...
二手鲜牛奶巴氏杀菌与装瓶线 包括： 牛奶奶油分离器 制造商：Seital 型号：SE13X 容量：2500升/小时 制造年份：1993年 板式换热器 - 闪光巴斯德 - 制造商：KMA 型号：K21-FS/4273 容量：2500升牛奶，8摄氏度至75摄氏度 制造年份：1998年 离心泵 制造：南莫 手动和气动盘阀、无力器、压力计、压力传感器等。 均质器 制作：尼罗·索阿维 型号：NS 3018-H 容量：2500升/小时 制造年份：1998年 高压：150巴 活塞数量：3 不锈钢平衡罐，容量约50升，开口、盖子，三英尺直 ，带出口水龙头。 手动和气动盘阀和铝制阀。 瓶装杂志/瓶子输送系统 制作人：马蒂斯·沃尔特 制造年份：2009年 不锈钢制造的塑料链式输送机 模制输送机长度约9000毫米 每包装单元126瓶 ...
An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.
补充SEN Combi RE 配备124个加油阀，封闭方式为 20位Zalkin螺丝封盖器 容量：19,900 bph，排气量为1.5升。PET瓶 制造年份：1991年 填充系统：等压填充系统 瓶装容量：1.5升。PET和0.5升。宠物 跑步方向：左 - 右 该机器适合填充碳酸软饮料。 包括闭合供给系统：Gassner 该机器已停产，但仍连接着
吹塑机Kosme 型号：KSB 6R 有6个空腔 制造年份：2017年 颈径：PCO 1881 容量：12,000 bph 容器容量：最大3.0升 包括预成型供料系统 包括冷水机（冷却单元） 无需吹塑成型 该设备已于2026年1月底拆除
在蒸汽室巴氏杀菌机中，瓶子可以在托盘上用热蒸汽 行巴氏杀菌。 温度上升和设定巴氏杀菌温度的保持时间参数可以根 需要设定。 状况：工作正常，维护良好 标称容量（1升瓶）：480瓶/小时 电击。功率：4.00千瓦 连接负载：400伏 / 16安培 / 50赫兹 / 5-pH 蒸汽连接：3/4英寸 压缩空气连接：6巴 机器尺寸（WxDxH）：1400 x 2000 x 2700 mm 重量：700公斤
可以填充Leibinger类型的Canvasa 产能：约1,000罐/小时 为标准罐设计：211 / 202型罐 没有铁皮桌 包括西门子S7控制 填充原理：背压填充技术 氧气摄取：10-60 ppb 占地面积：对应标准欧式托盘的尺寸 Canvasa是一款紧凑型半自动罐装机。它适合碳酸和静饮 。 该机器仍在一家酿酒厂生产，直到2026年7月，运行期 可参观
概述 摆动式顶部关闭机由德国制造商Rico于2004年制造。该 器仍在运行，随时可进行检查。 技术数据 输出：12,000瓶/小时 容量：0.33升（斯坦尼瓶） 14个封盖站 运行方向：顺时针作触摸面板 控制系统：西门子S7
部分来自瓶装厂的工厂组件可供获取。1）定位旋转瓶 盖机Kematec MBK 1 AR。2）Cornelis Costamat-PP-1环形站。3）端箱包装机Normpack。现场检查是 可能的。该方案不是完整的生产线，而是工厂中已退 的部件
KRONES Contiform S 8 吹气机 制造年份：2003年 容量：14,000 每小时 颈部尺寸：PCO 28 - 1881 瓶装容量：1.5升。PET瓶 包括冷却装置 包括预备食品供给系统 包括预备容器 包括预备倾斜装置 空气输送系统可选 德国立即可得 机器状况良好。
PET无效填充线 Sidel 容量分为18,000升/小时和27,000升。/ h - 取决于瓶子大小 容量： 36,000英初/时乘以0.5升。以及0.4升。 18,000 bph，排量1.5升。 制造年份：2006 - 2025 无菌产品线生产无菌产品，自2006年开始运营。所有维 护活动均由OEM服务技术人员每年完成两次，均为OEM规 及原厂零件。 该产品线包括加工区（搅拌机、巴氏杀菌器和无菌罐 、APA平台（用于消毒PET瓶和瓶盖的溶液）、填充器 处理和填充的CIP模块、4台摄像头、全瓶检查仪（360 ）、累积台、标签机（滚筒式和套筒式）、包装机、 托盘机和拉伸包装机。敏感部件的OEM是Sidell，冲洗部 是Tetra Pak。 多年来，所有主要电子元件均根据原厂（OEM）根据市 供应情况和最新型号进行升级和更新。 该系列状况非 ...
Overview This pilfer proof capping machine was manufactured in 2022 by the Spanish company CTM Ingeniería. It has been used for only 1.5 years under light operating conditions as part of an in-house production line. The company is now outsourcing its bottling operations, and therefore the machine is available for sale. It is in excellent condition and ready for immediate integration into a new production setup. Technical data Capacity: approx. 1,200 bottles/hour (in a fully automated line) Cap type: Pilfer proof screw caps Head: Configured for 28 mm caps (interchangeable with other sizes) Bottle compatibility: Adjustable height, currently configured for small bottles Construction: Compact stainless-steel design Condition: Excellent, used for only 1.5 years Operation: Suitable for integration into automated bottling lines
概述 这款填充液位和封闭检测机由德国公司KHS于2010年制造 。作视图将由Indspect的标签检测机完成。它旨在检查 瓶装瓶的装填高度、封口和标签。该机器运行至2025 1月，目前存放在公司内部。技术数据 容量：最高25,000 bph 交付范围 灌水高度和封闭检查系统 |KHS标签检测系统 |检
CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...
Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...
