铣床 二手 出售 (2,456)

Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP1 Control Type: FP1-2101 Year of Make: 1981 Operating voltage: 380 V, 3-phase Frequency: 50 Hz Rated current: 13 A Fuse: 35 A slow blow Configuration HEIDENHAIN 3-axis digital display for X/Y/Z T-slot work table Vertical milling head Work light Separate control/electrical cabinet Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-192

Auction-ID: A1-49175-2

General Description Universal tool milling machine manufactured by FU321, designed for precision milling, drilling, boring and general toolroom machining. The machine is equipped with a vertical milling head, power-feed work table and mechanical gearbox for versatile machining operations. Technical Details Model: FU321 Machine type: Universal tool milling machine Vertical milling head installed Power-feed work table Mechanical speed/feed gearbox Manual feed controls Machine vice included Original lubrication chart intact Condition Used industrial condition. The machine appears complete with vertical head, power-feed table, gearbox, machine vice and feed controls installed. The work table appears straight and the original lubrication chart is present. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-46

Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP1 Active (Source: Online Research) Year of adaptation control: 1989 Serial Number Adjustment Control: 25955 Operating voltage: 3~380V, 50/60Hz Rated current: 11 A Control voltage: 24 V DC Control/display: HEIDENHAIN TNC 113, 3 axes X/Y/Z (Source: Online research) Spindle speed: 40–2,000 min⁻¹ (Source: online research) Tool holder: SK40 (Source: online research) Configuration Active digital display with positioning function (Source: Online research) Swivelling vertical milling head T-slot work table Separate adjustment control / control cabinet Machine Light Note No technical documentation available. information researched to the best of my knowledge and belief. No guarantee is given for completeness and correctness. The article comes from a company liquidation and was actively used in the training workshop un ...

external diameter: - mmbore diameter in mm: - mmwidth: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

Milling machine with - Toolmaker's table - Heidenhain digital display - Rapid traverse - Coolant system - Central lubrication - Machine feet - Incl. drawer cabinet with contents x-travel 600 mm y-travel 400 mm z-travel 400 mm Table clamping area 720 x 410 mm Spindle speeds 40 - 2000 rpm Tool holder SK 40 Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.8 x 1.6 x 1.9 m Auction-ID: A7-49782-411

Technical details Manufacturer: ZPS Type: Horizontal milling machine Configuration: - Horizontal spindle - Gear-driven spindle head - T-slotted worktable - Longitudinal, cross and vertical manual feeds - Automatic table feed system - Rapid traverse - Feed gearbox with multiple speeds - Horizontal arbor support mounting - Mechanical control levers - Electrical control cabinet Application: - Flat surface machining - Slot milling - Keyway machining - General metalworking - Workshop and maintenance operations Construction: - Heavy-duty cast-iron machine frame - Conventional manual operation - Industrial gearbox drive Dimensions: - Length: Approx. 2400 mm - Width: Approx. 2200 mm - Height: Approx. 1900 mm Weight: Approx. 3500 kg Condition: Used Observed condition: - Machine appears mechanically complete - Table appears straight - Spindle nose and feed gearbox present - Electrical cabinet inst ...

General Description Horizontal milling machine designed for milling, slotting, gear cutting and general machining operations. The machine is equipped with a horizontal spindle and arbor carrying multiple slitting saws and side-and-face milling cutters, making it suitable for production and toolroom applications. Technical Details Machine type: Horizontal milling machine Horizontal spindle with arbor installed Multiple slitting saws and side-and-face cutters mounted on the arbor T-slotted work table Manual X/Y/Z table feeds Mechanical feed gearbox Feed and spindle speed selector dials Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and feed gearbox. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-23

Mitutoyo LH-600 digital height measuring instrument with QM-Data 100 control/display unit. Measuring range 600 mm, powered on and display visible in the photos. Suitable for quality control and workshop inspection. Auction-ID: A1-49190-58

DECKEL FP1 Universal Tool Milling Machine - Overhauled in 1999 by HARICH Equipped with work table, machine vice and separate control cabinet Tool cabinet with various tools, milling cutters, clamping devices, tool holders, drills and other machine accessories Instruction manual and technical documentation are also available Auction-ID: A1-49712-12

Machine ready for transport Auction-ID: A1-48649-17

• Type of machine: Universal tool milling machine • Control: Heidenhain TNC 114B (positioning control / simple CNC) • Travel (X/Y/Z): approx. 560 / 500 / 400 mm • Table size: ± 800 × 460 mm • Spindle holder: SK40 • Speed: 40 – 4000 rpm • Feed rate: 2 – 2000 mm/min • Quick displacement: ± 3500 mm/min • Pinole stroke: 90 mm Auction-ID: A1-48648-30

x-travel: 3500 mmy-travel: 1000 mmz-travel: 900 mmControl: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 21 tdimensions of the machine ca.: 10770 x 4100 x 3150 mControl system: Heidenhain iTNC 530Operating hours: 54631 hX-axis 3500 mmY-axis 1000 mmZ-axis 900 mmDrive power 30 kWSpeed range 20–3800 rpmRapid traverse 15 m/minFeed rate 4 m/minClamping surface 2x 1600 x 960 mmMax. table load 2 x 4000 kgMachine weight (approx.) 21 tMachine dimensions (WxDxH) 10770 x 4100 x 3150 mmTechnical data / AccessoriesUniversal bed-type milling and boring machineMilling head position: Vertical, horizontal (top, center, left, right)Heidenhain TS 120 3D touch probeKekeisen TW 32 drum-type tool changerKnoll hinged-belt chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is already ready for transport and can be assessed on viewing day. Workbench with magnetic plate and milling tool not included Auction-ID: A1-48648-9

feed X-axis 5000mm/min feed Y-axis 7000mm/min. Machine already ready for transport, machine to be assessed on viewing day. Needed for transport 1x low-loader and 1x curtain-sided trailer Pick up machine by appointment machine already ready for transport and to be viewed on viewing day for correct assessment Auction-ID: A1-48648-90

machine ready for transport and to be assessed on viewing day. Machine clamp not included Auction-ID: A1-48648-105

Equipped with: Siemens Sinumerik CNC control, 2007 Rittal SK 3304142 cooler, 2007 Knoll FKA/350 refrigerant system (116x83x150cm), 350 litres, 2.2 kW, 3×400 V, serial number 349718, Knoll chip conveyor type 350 K-1/100, year of manufacture 2000, serial number 88972; (450x110x184cm) Auction-ID: A1-41279-1

Auction-ID: A1-41279-6

max. workpiece diameter: . mmthreading length: . mmmax. module: 10 min. module: 1 diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/minVarious reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines.- Heavy-duty gear hobbing head ApFW (reconditioned)- Heavy-duty thread milling head ApGs (reconditioned)- Thread milling head ApG (reconditioned)- ApGi internal milling head (refurbished)- Various bushing sets- Lunettes- Counterholder with 3-jaw chuck- Various milling mandrelsand much more, as shown in the picturesIf you are interested in individual items or the entire package, please send me your price proposal.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49001-9

Brüder Mannesmann Flachdübel-Fräse including matching accessories. Auction-ID: A1-41279-707

Auction-ID: A1-41279-507

Auction-ID: A1-49001-8

x-travel: 17700 mmy-travel: 4755 mmz-travel: 800 mmmilling width: 3450 mmdistance table - vertical milling spindle: 3682 mmtable height over floor: 500 mmspindle diameter in front bearing: 200 mmturning speed range: 12 - 450 U/mintool taper: ISO 60 axial adjustment of the spindle slide: 800 mmcreep feed: 5 und 50 mm/minfeed stepless: 10 - 3000 mm/mincross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minrapid traverse: 10 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minvertical adjustment of cross beam: 3682 mmrapid traverse: 1,5 m/mincreep feed: 1,25 und 12,5 mm/minfeed stepless: 5 - 1500 mm/mintable-size: 17800x2800 mmcolumn daylight: 3600 mmControl: SIEMENS 840 C table load: 50.000/100.000 kgdrive of main spindle: 100 kWtotal power requirement: 170 kWweight of the machine ca.: 300 tdimensions of t ...

Powerful brushless 1.5 kW motor, Belt drive, Compact, precise drill milling machine with variable speed, Pinole with fine adjustment, Stepless electronic drive, Solid and precisely finished cross table, large dimension, Drill milling head rotatable ± 90°, Solid dovetail guide for the best stability and extreme precision, Easy to read measuring ruler on the cross table, Digital depth stop, accuracy of the display 0.01 mm, mm/inch, Digital Spindle display, Emergency stop button (CE), Parts list manual, Mounted coaster Auction-ID: A1-48552-144

FPT origin milling machine 3-axis vertical Strokes 2500/860/700 spindle 2500 rpm ISO 50 spindle External coolant. Outdoor air Heidnhain Control 3.30 Installation area 6000mm X 5000 mm Height 3500mm Auction-ID: A1-49175-1

3-axis digital readout brand SINO, Automatic longitudinal feed work table, Drill chuck with pin ISO30 - B16, Left / Right switch, Spindle protection, Fine adjustment, 2 Speed motor, Expulsion pin, LED work light, Cooling system, Tap function, Digital depth stop, Milling head motorically adjustable in height, Various tools in case, Manual with parts list Auction-ID: A1-48552-25

Auction-ID: A1-49175-3

Powerful brushless 750W motor, Belt drive, Compact, precise drill milling machine with variable speed, Pinole with fine adjustment, Stepless electronic drive, Solid and precisely finished cross table, large dimension, Drill milling head rotatable ± 90°, Solid dovetail guide for best stability and extreme precision, Easy to read measuring ruler on the cross table, Digital depth stop, accuracy of the display 0.01 mm, mm/inch, Digital Spindle display, Emergency stop button (CE), Parts list manual, Mounted coaster Auction-ID: A1-48552-109